DS18 PRO-GM6 Loudspeaker Instruction Manual

1. Introducció

Thank you for choosing the DS18 PRO-GM6 6.5-inch Midrange Loudspeaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

2. Informació de seguretat

Always observe the following safety precautions when installing and operating your loudspeaker:

• Desconnecteu el terminal negatiu de la bateria del vehicle abans de començar qualsevol treball elèctric per evitar curtcircuits.
• Ensure proper wiring and connections. Incorrect wiring can damage the speaker, amplificador o sistema elèctric del vehicle.
• Use appropriate gauge wiring for power and speaker connections.
• Mount the speaker securely to prevent movement during vehicle operation.
• Avoid installing speakers in locations that obstruct vehicle safety features (e.g., airbags).
• No feu servir el sistema d'àudio a volums excessivament alts durant períodes prolongats, ja que això pot causar danys auditius.
• Consulteu un instal·lador professional si teniu dubtes sobre alguna part del procés d'instal·lació.

3. Què hi ha a la caixa

• DS18 PRO-GM6 Loudspeaker (1 unit)
• Manual d'instruccions

Note: Additional mounting hardware or speaker wire may be required and is not included.

4. Especificacions

Imatge: Frontal view of the DS18 PRO-GM6 loudspeaker with its main technical specifications highlighted.

5. Configuració i instal·lació

Proper installation is crucial for the performance and longevity of your DS18 PRO-GM6 loudspeaker. This section provides general guidelines. Specific vehicle requirements may vary.

5.1 Planificació de la instal·lació

• Ubicació: Identify suitable mounting locations in your vehicle, typically door panels or custom enclosures. Ensure sufficient mounting depth (2.72 inches / 69mm) and clearance.
• Cablejat: Plan the routing of speaker wires from your amplifier to the speaker locations. Avoid running speaker wires alongside power cables to prevent noise interference.
• AmpCoincidència de lifier: The PRO-GM6 has an 8 Ohm impedance and handles 140W RMS. Ensure your amplifier can safely deliver power within these specifications. Connecting an 8 Ohm speaker to a 4 Ohm amplifier output will result in lower power delivery than the amplifier's rated 4 Ohm output.

5.2 Muntatge de l'altaveu

Imatge: Side profile of the DS18 PRO-GM6 loudspeaker, illustrating its depth and mounting flange.

1. Preparació de la superfície de muntatge: If installing in a new location, carefully cut a circular opening with a diameter of 5.70 inches (145mm). Ensure the surface is sturdy and free of obstructions.
2. Position Speaker: Place the speaker into the opening, aligning the mounting holes with the pre-drilled holes or marking new ones.
3. Altaveu segur: Use appropriate screws (not included) to firmly secure the speaker to the mounting surface. Do not overtighten.

5.3 Connexions de cablejat

Imatge: Part posterior view of the DS18 PRO-GM6 loudspeaker, showing the positive and negative speaker terminals.

1. Identificar terminals: The speaker has clearly marked positive (+) and negative (-) terminals.
2. Connecteu els cables: Connect the positive (+) output from your amplifier to the positive (+) terminal on the speaker. Connect the negative (-) output from your amplifier to the negative (-) terminal on the speaker. Maintain correct polarity for all speakers in your system.
3. Connexions segures: Ensure all connections are tight and free from short circuits.

6. Instruccions de funcionament

The DS18 PRO-GM6 is a midrange loudspeaker designed to reproduce frequencies between 98 Hz and 10 KHz. It should be used as part of a complete car audio system, typically paired with subwoofers for low frequencies and tweeters for high frequencies.

• Integració del sistema: Connect the PRO-GM6 to an appropriate ampcanal lifier.
• Configuració de crossover: For optimal sound quality and speaker protection, use an electronic crossover to filter out frequencies below 98 Hz (high-pass filter) and above 10 KHz (low-pass filter). Refer to your amplifier or head unit's manual for crossover adjustments.
• Ajust de guany: Estableix el ampguany del lificador correctament per coincidir amb el volum de sortidatage of your head unit. Avoid setting the gain too high, as this can lead to distortion and speaker damage.
• Període d'entrada: Allow a break-in period of approximately 10-20 hours of normal listening before operating the speakers at high volumes. This allows the speaker's suspension components to loosen and perform optimally.

7. Manteniment

The DS18 PRO-GM6 loudspeaker requires minimal maintenance:

• Neteja: Use a soft, dry cloth to wipe the speaker cone and frame. Avoid using harsh chemicals or excessive moisture.
• Inspecció: Comproveu periòdicament les connexions dels altaveus per assegurar-vos que estiguin ben ajustades i que no hi hagi cables desfilats o exposats.
• Protecció del medi ambient: While the speaker features a steel basket, it is not waterproof. Protect it from direct exposure to water and extreme temperatures.

8. Solució De Problemes

9. Garantia i Suport

DS18 products are covered by a limited warranty. For specific warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official DS18 website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact DS18 customer support directly.

Podeu trobar més informació i dades de contacte a DS18 Official Store on Amazon.