Introducció
Welcome to the user manual for your Fiamma Vent roof vent. This manual provides essential information for the proper installation, operation, and maintenance of your new roof vent, designed for caravans and campers
Producte acabatview
The Fiamma Vent roof vent is a high-quality solution for ventilating your caravan or camper. It features a low-profile design, integrated mosquito net, and easy-to-use rotary knob for opening.
Característiques clau
- Extremely flat structure, 8.5 cm high.
- Integrated mosquito net.
- Opening via rotary knob.
- Aerodynamic shape minimizes noise during driving.
- White glass.
- Opening angle: 60°.
- Ventilació forçada.
- Designed for complete external screwing, no drilling required.
Contingut del paquet
El paquet normalment inclou:
- 2 x Fiamma Vent Roof Vents
- 50 x cargols de fixació
- 2 x Dekalin Sealant tubes
This image displays the Fiamma Vent roof vent from an elevated angle, with its white lid partially open. The internal mechanism, including the rotary knob for opening and the integrated mosquito net, is visible. The low-profile design and the robust frame are clearly shown.
This image shows two Fiamma Vent roof vents, packaged alongside a tube of WAMovo SEAL 441 Dekalin sealant and a pile of fixing screws. This illustrates the complete installation kit provided with the product.
Configuració i instal·lació
Proper installation is crucial for the performance and longevity of your Fiamma Vent roof vent. Please follow these instructions carefully.
Abans de començar
- Ensure the installation area on your vehicle's roof is clean, dry, and free from debris.
- Verify that the roof thickness is suitable for the vent's frame.
- Gather necessary tools: screwdriver, measuring tape, pencil, cleaning supplies.
Passos d'instal·lació
- Prepara l'obertura: Carefully mark the 40 x 40 cm opening on your vehicle's roof. Use appropriate tools to cut the opening, ensuring clean edges.
- Aplicar segellador: Apply a generous bead of the provided Dekalin sealant around the perimeter of the roof opening on the exterior of the vehicle.
- Position the Outer Frame: Place the outer frame of the Fiamma Vent roof vent into the prepared opening, pressing it firmly into the sealant. Ensure it is correctly aligned.
- Assegureu-vos amb cargols: From the exterior, use the provided fixing screws to secure the outer frame to the roof. The design allows for complete external screwing, eliminating the need for internal drilling.
- Install Inner Frame: From the interior of the vehicle, attach the inner frame (which includes the mosquito net) to the outer frame. Ensure a secure fit.
- Comproveu si hi ha fuites: After installation, perform a water test to ensure there are no leaks. Apply additional sealant if necessary.
Instruccions de funcionament
The Fiamma Vent roof vent is designed for simple and efficient operation.
Obertura i tancament
To open the roof vent, turn the rotary knob located on the inner frame counter-clockwise. Continue turning until the desired opening angle (up to 60°) is achieved. To close, turn the knob clockwise until the lid is fully sealed.
Mosquitera
The integrated mosquito net provides protection against insects while allowing airflow. It is permanently attached to the inner frame.
Manteniment
Regular maintenance will ensure the longevity and optimal performance of your Fiamma Vent roof vent.
- Neteja: Periodically clean the exterior and interior surfaces of the vent with mild soap and water. Avoid abrasive cleaners that could damage the plastic or glass.
- Inspecció de segellador: Annually inspect the sealant around the vent for any cracks or signs of wear. Reapply sealant as needed to prevent water ingress.
- Comprovació del mecanisme: Ensure the rotary knob and opening mechanism operate smoothly. Lubricate moving parts with a silicone-based spray if they become stiff.
- Mosquito Net: Gently clean the mosquito net with a soft brush or vacuum cleaner to remove dust and debris.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Fuga d'aigua | Damaged or insufficient sealant; improper installation. | Inspect sealant around the frame. Clean and reapply Dekalin sealant as necessary. Ensure all screws are tightened. |
| Difficulty Opening/Closing | Mechanism stiff or obstructed; dirt accumulation. | Clean the moving parts of the opening mechanism. Apply a silicone-based lubricant to the hinges and rotary knob mechanism. |
| Excessive Noise During Driving | Vent not fully closed; damaged seal. | Ensure the vent is completely closed and latched. Check the rubber seal around the lid for damage and replace if necessary. |
Especificacions
- Model: 140417002
- Marca: Fiamma
- Aplicació: Caravans, Campers
- Mida d'obertura: 40 x 40 cm
- External Height (Flat Structure): 8.5 cm
- Material: Glass (for the transparent part)
- Color: Blanc
- Angle d'obertura: Fins a 60°
- Característiques: Integrated mosquito net, forced ventilation, aerodynamic design.
Garantia i Suport
For warranty information and technical support, please refer to the official Fiamma weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra.
For more information, visit the official Fiamma weblloc: www.fiamma.it
