Introducció
This user manual provides essential information for the proper use, setup, and maintenance of your BENNING PV 1-1/ PV 2 Measuring Device Case. Designed to protect your valuable BENNING PV 1-1 and PV 2 measuring tools, this case ensures secure transport and storage. Please read this manual thoroughly before using the product.
Producte acabatview
Figure 1: The BENNING PV 1-1/ PV 2 Measuring Device Case, shown with a measuring device securely housed inside. The case features a clear protective window for the device's display and controls, along with a durable shoulder strap for easy portability.
The BENNING PV 1-1/ PV 2 Measuring Device Case is a purpose-built accessory designed for the safe transport and protection of BENNING PV 1-1 and BENNING PV 2 measuring instruments. It features a robust construction and a design that allows for operation of the device while it remains inside the case.
Configuració
- Desembalatge: Carefully remove the measuring device case from its packaging. Inspect for any signs of damage during transit.
- Inserció del dispositiu: Open the case. Gently slide your BENNING PV 1-1 or BENNING PV 2 measuring device into the designated compartment. Ensure the device fits snugly and the display aligns with the clear protective window.
- Securing the Device: Close the case securely using the provided fasteners (e.g., zipper, velcro). Ensure the device is fully enclosed and protected.
- Col·locació de la corretja d'espatlla: If desired, attach the included shoulder strap to the D-rings on the case for convenient carrying. Ensure the clips are securely fastened.
Funcionament de la caixa
The case is designed for both transport and in-case operation of your measuring device.
- Transport: Use the shoulder strap or integrated handle to carry the case. Ensure the case is fully closed and secured during transport to prevent accidental drops or damage to the device.
- In-Case Operation: The clear window allows you to view the device's display and access its controls without removing it from the case. This provides continuous protection during use in various environments.
- Accessing Ports: If your measuring device requires access to ports (e.g., for cables or probes), ensure the case design allows for this. Some cases may have specific openings or require partial unzipping.
Manteniment
Proper maintenance will extend the life of your measuring device case.
- Neteja:
- For general cleaning, wipe the exterior with a soft, damp tela.
- For stubborn dirt, a mild soap solution can be used. Avoid harsh chemicals or abrasive cleaners, as these may damage the material.
- Ensure the case is completely dry before storing or reinserting your measuring device.
- Emmagatzematge: Guardeu la funda en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no la feu servir.
- Inspecció: Periodically inspect the case for signs of wear and tear, such as frayed stitching, damaged zippers, or tears in the fabric. Address minor issues promptly to prevent further damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Zipper stuck or difficult to move | Dirt or debris in zipper teeth; misaligned teeth | Clean zipper teeth with a small brush. Apply a small amount of zipper lubricant (e.g., wax, silicone spray) if needed. Gently work the zipper back and forth. |
| Strap detaches unexpectedly | Clip not fully secured; damaged clip or D-ring | Ensure clips are fully engaged with the D-rings. Inspect clips and D-rings for damage; replace if necessary. |
| Case material appears worn or faded | Prolonged exposure to sunlight or harsh conditions; normal wear and tear | This is typically cosmetic and does not affect protection. Store the case properly to minimize further fading. Consider replacement if structural integrity is compromised. |
Especificacions
- Marca: BENNING
- Compatibilitat de models: BENNING PV 1-1, BENNING PV 2
- Color: Negre
- Tipus: Measuring Instrument Bag / Case
- Número de peça del fabricant: 50426
- Número de model de l'article: 1666439
- Pes de l'article: 0.32 unces (aproximadament 9 grams)
- Dimensions del paquet: 11.89 x 7.05 x 2.56 polzades (aprox. 30.2 x 17.9 x 6.5 cm)
- País d'origen: Alemanya
Garantia i Suport
For specific warranty information regarding your BENNING PV 1-1/ PV 2 Measuring Device Case, please refer to the documentation provided with your purchase or contact BENNING customer support directly. Warranty terms may vary based on region and retailer.
For technical support, spare parts, or service inquiries, please visit the official BENNING website or contact their authorized service centers. Always provide your product model number (1666439) and purchase details when seeking support.
Note: Protection plans offered by third-party retailers are separate from the manufacturer's warranty.
