1. Introducció
Thank you for choosing the Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new outdoor lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Instruccions de seguretat
- Seguretat elèctrica: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Always disconnect power at the main circuit breaker before attempting any installation, maintenance, or bulb replacement.
- Ús exterior: This fixture is rated IP44, meaning it is protected against solid objects larger than 1mm and against splashing water from any direction. It is designed for outdoor use only.
- Tipus de bombeta: Use only R7s halogen bulbs with a maximum wattage de 150 W. Superant la potència màximatagPot causar sobreescalfament i danys a l'aparell o crear un perill d'incendi.
- Manipulació: Do not touch the halogen bulb with bare hands during installation or replacement, as oils from your skin can cause premature failure. Use a clean cloth or gloves.
- Muntatge: Assegureu-vos que la superfície de muntatge sigui estructuralment sòlida i que pugui suportar el pes de l'aparell.
3. Contingut del paquet
Si us plau, comproveu que tots els components siguin presents i no estiguin danyats:
- Brilliant Tanko 96162/06 Outdoor Wall Light Unit with Motion Sensor
- Maquinari de muntatge (cargols, tacs de paret)
- Manual d'instruccions (aquest document)
Note: R7s bulb is typically not included and must be purchased separately.
4. Configuració i instal·lació
Abans de començar: Assegureu-vos que l'alimentació de la zona d'instal·lació estigui tallada a l'interruptor principal.
- Preparació de la superfície de muntatge: Choose a suitable wall location for the fixture. Mark the drilling points for the mounting bracket.
- Muntar el suport: Drill holes at the marked points and insert the wall plugs. Secure the mounting bracket to the wall using the provided screws.
- Cablejat: Connect the electrical supply wires to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations. Secure all connections tightly.
- Instal·leu la bombeta: Carefully insert an R7s halogen bulb (max 150W) into the bulb holder. Avoid touching the glass part of the bulb with bare hands.
- Connecteu el dispositiu: Secure the main light unit to the mounted bracket. Ensure it is firmly attached and sealed against the wall to maintain its IP44 rating.
- Adjust Sensor and Light Head: The motion sensor and light head are adjustable. Position them to cover the desired detection area and illumination direction.
Figure 4.1: Brilliant Tanko 96162/06 Outdoor Wall Light with Motion Sensor. This image shows the complete fixture, including the main light housing and the adjustable motion sensor unit mounted below it.
Figura 4.2: Primer pla view of the R7s bulb socket within the Brilliant Tanko fixture. This illustrates where the R7s halogen bulb should be inserted.
5. Instruccions de funcionament
Once installed and power is restored, the Brilliant Tanko 96162/06 will operate as follows:
- Detecció de moviment: The integrated motion sensor detects movement within its adjustable range. When motion is detected, the light will automatically turn on.
- Durada de la llum: The light will remain on for a set period after motion is detected. This duration is typically adjustable via controls on the sensor unit (refer to specific markings on your sensor for adjustment dials for 'TIME' and 'LUX' settings, if present).
- Ambient Light Sensor (LUX): The sensor also includes an ambient light sensor. This prevents the light from activating during daylight hours, saving energy. The sensitivity of this sensor can often be adjusted to determine at what level of darkness the motion sensor becomes active.
6. Manteniment
- Neteja: Per netejar l'aparell, assegureu-vos que l'alimentació estigui apagada. Netegeu amb un drap suau i sec.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or sensor.
- Substitució de bombetes: Always disconnect power before replacing the bulb. Allow the old bulb to cool completely. Carefully remove the old R7s bulb and insert a new R7s bulb (max 150W), avoiding direct contact with the glass.
- Inspecció: Inspeccioneu periòdicament l'aparell per detectar qualsevol signe de danys, connexions soltes o desgast. Si trobeu algun problema, desconnecteu l'alimentació i consulteu un electricista qualificat.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power supply. Blown bulb. Faulty wiring. Ambient light too high. | Check circuit breaker. Replace bulb. Verify wiring connections (consult electrician). Adjust LUX setting on sensor. |
| La llum es manté encesa contínuament. | Continuous motion detected. Sensor faulty. Wiring error. | Adjust sensor angle/sensitivity. Check for obstructions. Consult electrician. |
| La llum s'encén aleatòriament. | Sensor too sensitive. Environmental factors (wind, animals). | Reduce sensor sensitivity. Re-position sensor to avoid unwanted triggers. |
| La llum parpelleja. | Loose bulb. Incorrect bulb type. Power fluctuations. | Ensure bulb is seated correctly. Verify R7s 150W bulb. Consult electrician for power issues. |
8. Especificacions
| Característica | Detall |
|---|---|
| Marca | Brillant |
| Número de model | 96162/06 |
| Dimensions del producte (L x A x A) | 14 x 21 x 22 cm |
| Pes de l'article | 521 grams |
| Classificació IP | IP44 |
| Estil | Modern |
| Color | Negre |
| Material | Metall, vidre |
| Nombre de bombetes | 1 |
| Voltage | 230 Volts |
| Usos específics | Només per a ús exterior |
| Característiques especials | Adjustable (sensor/light head) |
| Tipus de gorra | R7 |
| Max Wattage | 150W |
| Font d'alimentació | Electrical Cable (Wired) |
| Tipus d'instal·lació | Muntatge a la paret |
| Etiqueta energètica | A+ to E (for compatible bulbs) |
Figure 8.1: Energy label for the Brilliant Tanko 96162/06, indicating compatibility with bulbs from energy classes A++ to E.
9. Garantia i Suport
Information regarding specific warranty terms and spare parts availability for the Brilliant Tanko 96162/06 is not provided in the product data. For warranty claims, technical support, or inquiries about spare parts, please contact the retailer where you purchased the product or the manufacturer directly. Always have your proof of purchase and model number (96162/06) available when contacting support.
