1. Introducció
This manual provides detailed instructions for the safe and proper installation and use of your ONN DuraPro Universal Low-Profile TV Wall Mount, model ONA16TM012E. This mount is designed to securely hold 19"–60" flat and curved televisions, supporting weights up to 77 lbs. Its low-profile design positions your TV just 1.1 inches from the wall for a sleek appearance. Please read all instructions carefully before beginning installation.
Les característiques clau inclouen:
- Universal compatibility for 19"–60" flat and curved TVs.
- Supports VESA mounting patterns from 75x75mm to 400x400mm.
- Pro ultra baixfile design, extending only 1.1" from the wall.
- Heavy-duty steel construction with a maximum load capacity of 77 lbs.
- Integrated bubble level for accurate installation.
- Includes a 6ft high-speed HDMI cable.
2. Informació de seguretat
WARNING: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified professional.
- Capacitat de pes: No supereu la capacitat màxima de pes de 35 kg. Aquest suport està pensat per utilitzar-se només amb els pesos màxims indicats. L'ús amb productes més pesants que els pesos màxims indicats pot provocar inestabilitat i causar possibles lesions.
- Mida del televisor: This mount is designed for TVs between 19 and 60 inches.
- Estructura de la paret: Ensure the mounting surface can safely support the combined weight of the equipment and all attached hardware. For wood stud walls, ensure studs are solid and located accurately. For concrete or brick walls, use appropriate anchors (not always included, verify with package contents). Do not install into drywall alone.
- Eines: Use appropriate tools for installation. Power tools should be used with caution.
- Nens: Mantingueu els nens allunyats durant la instal·lació. Les peces petites poden ser un perill d'asfíxia.
- Equips de protecció individual: Wear safety glasses and other protective gear as needed during installation.
3. Contingut del paquet
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact customer support.
Descripció de la imatge: The main product image shows the black metal TV wall mount assembly, consisting of a horizontal wall plate and two vertical TV brackets. A coiled black HDMI cable is placed in front of the mount. This image represents the complete package contents.
Typically includes:
- Muntatge de la placa de paret
- TV Brackets (2x)
- Mounting Hardware Kit (screws, washers, spacers, anchors)
- Built-in Bubble Level
- 6ft High-Speed HDMI Cable
- Plantilla de perforació
4. Instruccions d'instal·lació
4.1 Eines necessàries (no incloses)
- Llapis
- Cercador de muntants (per a la instal·lació de muntants de fusta)
- Perforar amb broques adequades
- Clau anglesa o clau anglesa ajustable
- Tornavís Phillips
- Cinta mètrica
4.2 Fixació de suports al televisor
- Col·loca amb cura el televisor cap per avall sobre una superfície suau i neta per evitar que es faci malbé la pantalla.
- Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
- Select the correct diameter and length screws from the hardware kit that fit your TV's VESA holes. Use washers and spacers if necessary to ensure a snug fit without overtightening.
- Attach the two vertical TV brackets to the back of your TV using the selected screws. Ensure the hooks on the brackets are facing upwards and the brackets are centered and level.
4.3 Muntatge de la placa de paret
Important: Determine your wall type (wood stud, concrete/brick) before proceeding.
Per a parets amb entramats de fusta:
- Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at your desired TV height.
- Position the drilling template (or the wall plate itself) against the wall, aligning the center holes with your marked stud centers. Use the built-in bubble level to ensure it is perfectly horizontal. Mark the drill points.
- Drill pilot holes at the marked locations. The size of the drill bit will depend on the lag bolts provided.
- Attach the wall plate to the wall using the lag bolts and washers. Tighten securely, but do not overtighten.
Descripció de la imatge: A person is using a power drill to create pilot holes in a wall, guided by a white drilling template labeled "DRILLING TEMPLATE". This illustrates the initial step of marking and drilling for wall plate installation.
Descripció de la imatge: Un primer pla view of the black metal wall mount, highlighting the small, clear built-in bubble level. The bubble is centered, indicating a level installation. This feature helps ensure the TV is mounted straight.
Per a parets de formigó/maó:
- Position the drilling template (or the wall plate) against the wall at your desired TV height. Use the built-in bubble level to ensure it is perfectly horizontal. Mark the drill points.
- Drill pilot holes at the marked locations using a masonry drill bit of the appropriate size for the concrete anchors.
- Insert the concrete anchors into the drilled holes, ensuring they are flush with the wall surface.
- Attach the wall plate to the wall using the lag bolts and washers, screwing them into the anchors. Tighten securely.
4.4 Penjar el televisor
- With assistance, carefully lift the TV and hook the brackets onto the top edge of the wall plate.
- Gently lower the TV until the brackets are fully seated on the wall plate.
- Locate the safety locks at the bottom of the TV brackets. Secure the TV to the wall plate by tightening these screws. This prevents accidental dislodging.
Descripció de la imatge: Un primer pla view of the black metal TV bracket showing a small silver screw and plate, which functions as a safety lock. This mechanism secures the TV to the wall plate after hanging, preventing accidental removal.
5. Instruccions de funcionament
Once installed, the ONN DuraPro Low-Profile TV Wall Mount provides a fixed, secure position for your television. No further adjustments are typically required for this type of mount.
- Cables de connexió: Before hanging the TV, it is often easier to connect all necessary cables (power, HDMI, etc.). If not, carefully reach behind the TV to connect them after mounting.
- Pro baixfile Disseny: The mount positions your TV very close to the wall (1.1 inches). This creates a clean aesthetic but may require careful cable management.
Descripció de la imatge: A coiled black HDMI cable with gold-plated connectors is shown against a white background. This cable is included with the mount for immediate connectivity.
Descripció de la imatge: A flat-screen television is mounted on a white wall, demonstrating the low-profile design of the mount. The TV sits very close to the wall, creating a sleek and integrated look in a modern room with a large window.
6. Manteniment
- Inspecció periòdica: Periodically check all screws and connections to ensure they remain tight and secure. Over time, vibrations or minor shifts can loosen fasteners.
- Neteja: Dust the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Límits de pes: Do not hang additional items on the TV or mount that would exceed the stated weight capacity.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El televisor no està anivellat després de la instal·lació. | Wall plate was not perfectly level during installation. | Remove the TV. Loosen the wall plate mounting screws slightly, adjust the plate using the built-in bubble level, and re-tighten. Re-hang the TV. |
| TV feels unstable or wobbly. | Mounting screws are not fully tightened, or incorrect anchors were used for the wall type. TV weight exceeds capacity. | Immediately remove the TV. Check all mounting screws for tightness. Verify wall type and ensure appropriate anchors/fasteners were used. Confirm TV weight is within the 77 lbs limit. If unsure, consult a professional. |
| Cannot attach TV brackets to TV. | Incorrect screw size or length for TV's VESA holes. | Refer to your TV's manual for correct VESA screw specifications. Use the appropriate screws, washers, and spacers from the provided hardware kit. |
| El televisor no està enganxat a la paret. | Cables or TV protrusions are interfering. | Ensure all cables are routed neatly and not pinched. Check for any obstructions on the back of the TV or wall that might prevent a flush fit. |
8. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | ONA16TM012E |
| Compatibilitat de la mida del televisor | 19" – 60" |
| Capacitat de pes | 77 lliures (35 kg) |
| Compatibilitat VESA | 75x75mm a 400x400mm |
| Profile from Wall | 1.1 polzades |
| Material | Acer resistent |
| Pes de l'article | 2.82 lliures |
| Dimensions del paquet | 17.48 x 3.58 x 1.89 polzades |
Descripció de la imatge: A modern flat-screen TV is displayed on a wooden console, with text overlay indicating "For 19-60” TVs". This image visually confirms the range of TV sizes compatible with the mount.
Descripció de la imatge: The black metal TV wall mount is shown from the front, with text overlay stating "Holds up to 77 lbs". This highlights the robust construction and weight capacity of the mount.
9. Garantia i Suport
For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Specific warranty terms may vary by region and retailer.
For general inquiries or assistance, please visit the ONN official weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
