RockJam Portable DJ Laptop Stand Instruction Manual

1. Introducció

This manual provides essential instructions for the assembly, operation, and maintenance of your RockJam Portable DJ Laptop Stand (Model RJLP1). Designed for digital DJs, music producers, and home office users, this stand offers a stable and adjustable platform for laptops, controllers, and CD players. Please read these instructions thoroughly before use to ensure proper setup and safe operation.

2. Contingut del paquet

Verifiqueu que tots els components que s'enumeren a continuació siguin presents al vostre paquet:

• Main Stand Frame (2 pieces)
• Support Poles (2 pieces)
• Laptop Holding Arms (2 pieces)
• Leg Base Plates (2 pieces)
• Muntatge Clamps (2 peces)
• Screw Knobs (4 pieces)
• Cargols (4 peces)
• Volandes (4 peces)
• Surface Protectors (4 pieces)
• Support Pole Extensions (4 pieces)

Figure 2.1: All components included in the RockJam Portable DJ Laptop Stand package.

3. Característiques del producte

• Construcció duradora: Made from steel, ensuring longevity and stability.
• Alçada ajustable: Features seven different height settings for optimal positioning.
• Disseny antilliscant: Includes surface protectors and a design that prevents devices from sliding.
• Ventilated Design: Open structure promotes airflow to prevent device overheating.
• Ús versàtil: Can be used freestanding or securely mounted to a desk with included clamps.
• Alta capacitat de càrrega: Capable of holding devices up to 8 lbs (approximately 3.6 kg).

4. Instruccions de configuració

Follow these steps to assemble your laptop stand:

4.1 Basic Assembly

1. Attach the two Support Poles between the two Main Stand Frame pieces using the provided Screw Knobs. Ensure they are securely tightened.
2. Secure the Laptop Holding Arms to the upper section of the Main Stand Frame using the remaining Screw Knobs. These arms should face upwards to cradle your device.
3. Attach the Leg Base Plates to the bottom of the Main Stand Frame using the provided Screws and Washers.
4. Apply the Surface Protectors to the contact points where your device will rest and where the stand touches the surface (if using freestanding mode).

Figure 4.1: Fully assembled RockJam Portable DJ Laptop Stand in freestanding configuration.

Figure 4.2: Detail of the screw knobs for height adjustment and securing the stand's components.

4.2 Ajust de l'alçada

The stand offers multiple height settings. Loosen the Screw Knobs on the vertical supports, adjust the Laptop Holding Arms to your desired height, and then re-tighten the knobs firmly to secure the position.

Figure 4.3: The stand's adjustable height and width ranges for customized setup.

4.3 Mounted Setup (Optional)

For enhanced stability, the stand can be mounted to a desk or table using the included Mounting Clamps:

1. Remove the Leg Base Plates from the bottom of the Main Stand Frame.
2. Col·loqueu el muntatge Clamps to the bottom of the Main Stand Frame using the same Screws and Washers.
3. Position the stand on your desired surface and tighten the clamps securely to prevent movement.

Figure 4.4: The laptop stand securely mounted to a desk using the provided clamps.

5. Instruccions de funcionament

Once assembled and positioned, place your laptop, DJ controller, or CD player onto the Laptop Holding Arms. The anti-slip design and front lips of the arms are designed to keep your device securely in place. The open design of the stand ensures proper ventilation for your electronic devices, reducing the risk of overheating during extended use.

Figure 5.1: A laptop positioned on the stand, demonstrating typical usage.

6. Manteniment

• Regularly check all screws and knobs to ensure they remain tight.
• Netegeu el suport amb un drap suau i sec. Eviteu productes de neteja o dissolvents abrasius.
• Inspect the anti-slip pads and surface protectors for wear and tear. Replace if necessary to maintain device security.
• Store the stand in a dry environment to prevent rust or damage to the steel components.

7. Solució De Problemes

• La posició de suport es nota inestable: Ensure all screw knobs and mounting clamps (if used) are fully tightened. Verify that the stand is placed on a flat, stable surface.
• Device slides on the arms: Check that the anti-slip surface protectors are correctly applied and are not worn. Ensure the device is centered and within the weight limit.
• Dificultat per ajustar l'alçada: Loosen the screw knobs sufficiently before attempting to adjust the height. Do not force the adjustment.

8. Especificacions

9. Garantia i Suport

RockJam products are manufactured to high-quality standards. For warranty information, technical support, or assistance with your product, please refer to the contact details provided with your purchase documentation or visit the official RockJam weblloc web. Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.