1. Introducció
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your APC 1500VA Smart UPS with SmartConnect, model SMC1500-2UC. This Uninterruptible Power Supply (UPS) is designed to protect your critical IT equipment, such as servers, switches, routers, and networking devices, from power outages and harmful power conditions. It delivers reliable battery backup power and safeguards against spikes and surges, ensuring continuous operation and data integrity.
Key features include a 1500VA / 900W pure sine wave output, Automatic Voltage Regulation (AVR), and APC SmartConnect for cloud-enabled remote monitoring.
2. Informació de seguretat
Read these instructions carefully before installing, operating, servicing, or maintaining the equipment. Failure to observe these instructions could result in death, serious injury, or equipment damage.
- This UPS contains internal batteries. Do not attempt to open the UPS enclosure, except for battery replacement by qualified personnel.
- Connecteu el SAI només a una presa de terra.
- No llenceu les piles al foc. Les bateries poden explotar.
- No obriu ni mutileu les bateries. L'electròlit alliberat és nociu per a la pell i els ulls. Pot ser tòxic.
- El manteniment de les bateries ha de ser realitzat o supervisat per personal coneixedor de les bateries i de les precaucions necessàries. Mantenir el personal no autoritzat lluny de les bateries.
- Substituïu les piles per les del mateix tipus i nombre de piles que les instal·lades originalment.
- The UPS is heavy. Always use proper lifting techniques and ensure adequate support during installation.
3. Contingut del paquet
Verifiqueu que tots els elements que s'enumeren a continuació s'inclouen al vostre paquet:
- UPS unit (APC SMC1500-2UC)
- Rails de suport per a muntatge en bastidor
- Guia d'instal·lació de SmartConnect
- Manual d'usuari (aquest document)
- CD d'instal·lació de PowerChute Business Edition
- Informació de seguretat
- Cable Ethernet
- Cable USB
4. Producte acabatview
4.1 Tauler frontal
The front panel features an intuitive LCD interface and control buttons for local management and status monitoring.
- Interfície LCD: Displays real-time status, alerts, and configuration options. It can alert to problems in building wiring.
- Botons de control: Used for navigating the LCD menu, configuring settings, and performing basic operations like power on/off.
4.2 Panell posterior
- Entrada: NEMA 5-15P power plug for connecting to utility power.
- Sortida: Six (6) NEMA 5-15R outlets for connecting protected equipment. One outlet group is switchable.
- SmartConnect Port: Ethernet port for cloud-based remote monitoring and management.
- Port USB: For local monitoring and management with compatible software (e.g., PowerChute Business Edition).
5. Configuració
5.1 Muntatge en bastidor
The SMC1500-2UC is a 2U rackmount UPS. Use the included rack-mounting support rails to securely install the unit into a standard 19-inch equipment rack. Ensure the rack is stable and capable of supporting the UPS's weight (approximately 64 pounds).
- Attach the rack-mounting support rails to the rack posts according to the rail manufacturer's instructions.
- Carefully slide the UPS unit onto the installed rails until it is fully seated and secured.
- Secure the front of the UPS to the rack posts using the provided screws.
5.2 Connexió de la bateria
The UPS ships with internal batteries. Before initial use, ensure the internal battery is properly connected. Refer to the specific instructions provided in the SmartConnect Installation Guide for detailed steps on connecting the internal battery pack, if required.
5.3 Connexió d'alimentació
- Connect the UPS's NEMA 5-15P input plug to a dedicated, grounded 120V AC wall outlet. Avoid using extension cords or surge protectors.
- Connect your equipment (servers, routers, switches, etc.) to the NEMA 5-15R output receptacles on the rear panel of the UPS. Prioritize critical equipment for battery-backed outlets.
- For remote monitoring, connect an Ethernet cable from the SmartConnect port on the UPS to your network.
- For local monitoring, connect the included USB cable from the UPS to your server or computer.
5.4 Engegada inicial
After all connections are made, press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will begin its self-test and charging process. Allow the UPS to charge for at least 24 hours to ensure optimal battery runtime before relying on it for extended power outages.
6. Instruccions de funcionament
6.1 Funcionament bàsic
- Encès: Premeu el botó d'engegada del panell frontal.
- Apagar: Premeu i manteniu premut el botó d'engegada fins que el SAI s'apagui.
- Silenciar l'alarma: Briefly press any button to silence an audible alarm.
6.2 LCD Interface Navigation
The LCD display provides critical information and allows for configuration. Use the navigation buttons (up, down, enter) to scroll through menus and adjust settings. The display shows input voltage, voltage, battery charge level, load percentage, and various status indicators.
6.3 Volum automàtictagReglament (AVR)
El SAI té funcions de Vol automàtictage Regulation (AVR) to correct minor power fluctuations without switching to battery power. This extends battery life by only using battery power during significant voltage drops or surges.
6.4 APC SmartConnect (Cloud Monitoring)
APC SmartConnect enables remote monitoring of your UPS via a secure cloud portal. This feature provides automatic notifications, firmware updates, and proactive advice to maximize the life and performance of your UPS. A 6-month free trial of the SmartConnect Standard plan is included for units purchased and/or registered after August 1, 2023.
7. Manteniment
7.1 Gestió de la bateria
The UPS features intelligent battery management, which prolongs battery life by regulating the charge voltage in relation to battery temperature. It also provides periodic battery self-tests and notifications for battery replacement.
7.2 Substitució de la bateria
UPS batteries are consumable items and will eventually require replacement. The UPS will indicate when battery replacement is necessary through the LCD display and SmartConnect alerts. Always replace batteries with genuine APC replacement battery cartridges (RBCs) to ensure compatibility and optimal performance. Refer to the APC website or contact support for specific replacement instructions and compatible battery models.
Warning: Battery servicing should only be performed by qualified personnel. Disconnect the UPS from utility power and internal batteries before servicing.
7.3 Neteja
Periodically clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are free from dust and obstructions to maintain proper airflow.
8. Solució De Problemes
This section provides solutions to common issues. For more complex problems, consult the full user manual on the APC weblloc o contacteu amb l'assistència tècnica.
| Problema | Causa possible | Solució |
|---|---|---|
| El SAI no s'encén. | Not connected to utility power; internal battery disconnected; low battery charge. | Ensure the UPS is plugged into a live, grounded outlet. Verify internal battery connection. Allow UPS to charge for several hours. |
| El SAI emet un so continu. | On battery power; overload condition; battery fault. | Check utility power. Reduce connected load. Check LCD for battery fault indicators. |
| Connected equipment loses power during an outage. | Overload; battery runtime exceeded; battery fault. | Reduce load. Check battery health and replace if necessary. |
| L'SmartConnect no es connecta. | Network issue; incorrect configuration; firewall blocking. | Verify Ethernet cable connection. Check network settings and firewall rules. Refer to SmartConnect documentation. |
9. Especificacions
| Característica | Detall |
|---|---|
| Número de model | SMC1500-2UC |
| Capacitat | 1500 VA / 900 W |
| Entrada Voltage | 120 V AC |
| Vol. De sortidatage | 120V AC (Pure Sinewave) |
| Connexions de sortida | (6) NEMA 5-15R |
| Connexió d'entrada | NEMA 5-15P |
| Tipus de bateria | Àcid de plom segellat |
| Dimensions del producte (P x A x A) | 17.3 x 6.7 x 8.6 polzades (43.9 x 17.0 x 21.8 cm) |
| Pes de l'article | 64 lliures (29 kg) |
| Factor de forma | Muntatge en bastidor 2U |
| Color | Negre |
| Temps d'execució (mitja càrrega) | Approximately 18 minutes, 7 seconds |
| Runtime (Full Load) | Approximately 6 minutes, 8 seconds |
10. Garantia i Suport
10.1 Informació de la garantia
The APC SMC1500-2UC Smart UPS comes with a Garantia de reparació o substitució de 2 anys on the unit and its internal battery. This warranty ensures coverage against defects in materials and workmanship under normal use.
10.2 Suport tècnic
For technical assistance, troubleshooting, or warranty claims, please visit the official APC by Schneider Electric website or contact their customer support. Have your product model number (SMC1500-2UC) and serial number ready when contacting support.
Online resources often include FAQs, knowledge bases, and downloadable documentation for further assistance.
