Fagor HGV-10-21 HEI-10-21 Combi Steamer Display Board Instruction Manual

1. Introducció

This manual provides essential instructions for the installation, operation, and maintenance of the Fagor HGV-10-21 and HEI-10-21 display board. This component is designed for use in Fagor combi steamers, including both electric and gas models. Please read this manual thoroughly before attempting any installation or operation to ensure proper function and safety.

2. Informació de seguretat

• Instal·lació professional: Installation of this display board should only be performed by qualified and authorized service personnel. Incorrect installation can lead to equipment damage or personal injury.
• Desconnexió d'alimentació: Always ensure the combi steamer is completely disconnected from the main power supply before attempting any installation, maintenance, or repair work.
• Descàrrega electrostàtica (ESD): Electronic components are sensitive to static electricity. Handle the display board by its edges and use appropriate ESD precautions (e.g., anti-static wrist strap) to prevent damage.
• Integritat dels components: Do not use the display board if it appears damaged or if any components are loose or missing.
• Recanvis originals: Use only genuine Fagor replacement parts to ensure compatibility and maintain product integrity.

3. Producte acabatview

The Fagor HGV-10-21 / HEI-10-21 display board serves as a critical interface component for Fagor combi steamers. It typically features LED indicators to convey operational status or error codes, and a connector for integration into the appliance's control system.

Figure 1: Fagor HGV-10-21 HEI-10-21 Display Board. This image shows the Fagor display board, a green circuit board featuring five green LED indicators and a multi-pin connector. The board is labeled 'FAGOR' and 'CLV-001 0708', indicating its model and manufacturing details. This component is designed for integration into Fagor combi steamers.

4. Configuració i instal·lació

Installation of the display board requires access to the internal components of the Fagor combi steamer. Due to the complexity and electrical nature of the appliance, installation must be performed by a certified technician.

1. Preparació: Ensure the combi steamer is unplugged and cooled down. Access the control panel area as per the specific service manual for your combi steamer model.
2. Removal of Old Board (if applicable): Carefully disconnect any wiring harnesses from the existing display board. Note the orientation and connection points. Remove mounting screws or clips securing the old board.
3. Installation of New Board: Position the new Fagor display board (HGV-10-21 / HEI-10-21) in the designated slot. Secure it with the appropriate screws or clips.
4. Connexió: Reconnect the wiring harness(es) to the new display board, ensuring all connections are firm and correctly oriented. Refer to the combi steamer's wiring diagram if necessary.
5. Remuntatge i proves: Reassemble the control panel. Restore power to the combi steamer and perform a functional test to verify the display board operates correctly. Check for proper illumination of LEDs and responsiveness.

5. Instruccions de funcionament

The display board itself does not have user-operable controls. Its function is to provide visual feedback through its LED indicators, which are controlled by the combi steamer's main control unit. The specific meaning of each LED indicator (e.g., power, heating status, error codes) will be detailed in the primary user manual for your Fagor combi steamer model.

Observe the LEDs during operation to monitor the status of the appliance. Any unusual patterns or unlit LEDs when expected to be on may indicate a fault.

6. Manteniment

The Fagor display board requires minimal maintenance. However, proper care can extend its lifespan and ensure reliable operation.

• Neteja: If the display board becomes dusty, gently clean it with a soft, dry, anti-static brush or compressed air. Do not use liquid cleaners directly on the board.
• Inspecció: Periodically inspect the board for any signs of physical damage, corrosion, or loose connections. This should be done by a qualified technician during routine appliance servicing.
• Condicions ambientals: Ensure the combi steamer operates within its specified environmental conditions to prevent damage to electronic components from excessive heat or humidity.

7. Solució De Problemes

If you experience issues with the display board, consider the following troubleshooting steps. For complex problems, contact a qualified service technician.

Nota: Many issues related to the display board may stem from the main control unit of the combi steamer. A qualified technician is required for accurate diagnosis and repair.

8. Especificacions

• Tipus de producte: Tauler de visualització
• Marca: Fagor
• Models compatibles: Fagor HGV-10-21, Fagor HEI-10-21, HEI 1021/HGV 1021 Combi Steamers
• Aplicació: Combi Steamer (Electric and Gas models)
• Referència del fabricant: 4251391522121
• Internal Part Number (from board): CLV-001

9. Garantia i Suport

For warranty information, please refer to the original purchase documentation or contact the seller, Gastroteileshop, directly. Information regarding spare parts availability for this specific component is not readily available. For technical support or service, please contact an authorized Fagor service center or your equipment supplier.