Manual d'usuari del xassís Phanteks Enthoo Pro ATX

1. Introducció

Thank you for choosing the Phanteks Enthoo Pro ATX Chassis. This manual provides essential information for setting up, operating, and maintaining your new computer case. The Enthoo Pro is designed for enthusiasts, offering extensive cooling possibilities, multiple radiator support, and upgrade capabilities, all housed within a sleek design featuring a tempered glass side panel.

For a comprehensive guide and additional details, please refer to the official Manual d'usuari (PDF).

Figure 1.1: Phanteks Enthoo Pro ATX Chassis, showcasing its tempered glass side panel and brushed aluminum look.

2. Característiques clau

• Brushed aluminum Look: Aesthetic design with a clean interior, featuring hidden PSU and HDDs.
• Panell de vidre temperat: Proporciona un clar view de components interns.
• Easy Accessibility: Convenient access to fans and dust filters for maintenance.
• Gestió de cables: Equipped with Phanteks' Velcro cable ties for organized routing.
• Compartiment d'unitat òptica: Includes space for optical drives.
• Reservoir Mounts and Pump Slots: Designed for custom liquid cooling solutions.
• Ports frontals: Features 2 x USB 3.0, USB-C GEN 2, Mic, Headphone, Reset, and RGB Switch.
• RGB Lighting Compatibility: Compatible with Phanteks RGB LED strips and RGB motherboards.
• Easy Radiator Installation: Streamlined process for installing radiators.

Figure 2.1: Spacious interior of the Enthoo Pro chassis, highlighting cable management options and component layout.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents al vostre paquet:

• Phanteks Enthoo Pro ATX Chassis (PH-ES614PTG_BK)
• Accessory Box (containing screws, standoffs, cable ties)
• Pre-installed Fans (typically 2 x 140mm and 1 x 120mm, exact configuration may vary)
• User Manual (this document and/or PDF version)

4. Guia de configuració

Follow these steps for initial setup and component installation:

1. Preparació: Place the chassis on a stable, flat surface. Remove the tempered glass side panel by unscrewing the four thumb screws and carefully lifting it away.
2. Instal·lació de la placa base: Install the necessary motherboard standoffs. Carefully align your ATX motherboard with the standoffs and secure it with screws.
3. Instal·lació de la unitat d'alimentació (PSU): Install your PSU into the dedicated compartment at the bottom rear of the chassis. Secure it with screws from the rear.
4. Instal·lació de la unitat d'emmagatzematge: The chassis supports multiple drive types. Utilize the 3.5" HDD cages and 2.5" SSD mounts. The lower cage can house 3 HDDs, and there are dedicated SSD mounts behind the motherboard tray.

Figura 4.1: Detallada view of the drive bays, illustrating the ample storage options within the chassis.

5. Instal·lació de la targeta d'expansió: Install your graphics card and other expansion cards into the PCIe slots on your motherboard, securing them with the provided screws.
6. Gestió de cables: Utilize the numerous cable routing cutouts and Phanteks' Velcro ties behind the motherboard tray to ensure a clean and organized build. This improves airflow and aesthetics.

Figure 4.2: Rear of the motherboard tray, showcasing the cable management channels and Velcro ties for a tidy build.

7. Instal·lació del sistema de refrigeració: Install additional fans or liquid cooling radiators as desired. The case supports various configurations for optimal airflow.
8. Connexions del panell frontal: Connect the front panel cables (USB 3.0, USB-C, audio, power, reset, RGB switch) to their respective headers on your motherboard.
9. Assemblea final: Un cop instal·lats tots els components i gestionats els cables, torneu a fixar el panell lateral de vidre temperat i fixeu-lo amb els cargols de polze.

5. Instruccions de funcionament

The Phanteks Enthoo Pro chassis is designed for straightforward operation. Key operational features include:

• Botó d'encesa: Located on the top panel, press to power on or off your system.
• Ports d'E/S frontals: Access USB 3.0, USB-C GEN 2, microphone, and headphone jacks conveniently located on the front panel.

Figure 5.1: Front panel connectivity, including USB 3.0, USB-C, and audio ports, hidden behind a discreet cover.

• Control d'il·luminació RGB: If connected to a compatible Phanteks RGB controller or motherboard, use the dedicated RGB switch on the front panel to cycle through lighting modes or synchronize with your motherboard's software.
• Control del ventilador: Fan speeds are typically controlled via your motherboard's BIOS/UEFI settings or dedicated fan control software.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your chassis:

• Neteja del filtre de pols: The Enthoo Pro features easily removable dust filters on the top, front, and bottom. Regularly remove and clean these filters with water or a soft brush to maintain optimal airflow and prevent dust buildup inside your system.
• Neteja exterior: Netegeu les superfícies exteriors amb un damp drap. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat o el vidre temperat.
• Interior Dusting: Periodically use compressed air to remove dust from internal components, ensuring efficient cooling.

7. Solució De Problemes

If you encounter issues with your chassis, consider the following common troubleshooting steps:

• Sense energia: Ensure the PSU is properly connected to the motherboard and all components. Check the power button connection to the motherboard.
• Els ventiladors no giren: Verify fan connections to the motherboard or fan controller. Check BIOS/UEFI settings for fan speed control.
• Problemes d'il·luminació RGB: Confirm RGB cable connections to the motherboard or controller. Ensure compatible software is installed and configured correctly.
• Ports del panell frontal que no funcionen: Double-check that all front panel I/O cables are securely connected to the correct headers on your motherboard.

For more complex issues, consult the full user manual or contact Phanteks customer support.

8. Especificacions

9. Garantia i Suport

Phanteks products are manufactured to the highest quality standards. For detailed warranty information, product registration, and technical support, please visit the official Phanteks weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el comprovant de compra per a reclamacions de garantia.