1. Introducció i informació de seguretat
This manual provides essential instructions for the safe and effective operation of your Dracast BoltRay Plus Bi-Color LED600 3-Light Kit. Please read this manual thoroughly before use and retain it for future reference.
Precaucions de seguretat importants:
- Do not operate the unit with wet hands or near water.
- Assegureu-vos una ventilació adequada per evitar el sobreescalfament. No obstruïu les obertures de ventilació.
- Use only the specified power adapter. Disconnect power before cleaning or servicing.
- Eviteu l'exposició directa dels ulls a la font de llum LED.
- Keep the equipment away from flammable materials.
- No intenteu desmuntar ni modificar la unitat. Encarregueu tot el manteniment a personal qualificat.
- Securely mount the lights to prevent accidental falls.
2. Contingut del paquet
Verify that all items listed below are present in your kit:
- 3x Dracast BoltRay LED600 Plus Bi-Color Light Fixtures
- 3x 4-Way Barndoors
- 3x Removable Diffusion Filters
- 3x Mounting Yokes (pre-attached to lights)
- 3x comandaments a distància
- 3x Multi-Voltage AC Power Adapters
- 1x Soft Nylon Carrying Case
- 1x Injection-Molded Travel Case
Image 2.1: All components of the Dracast BoltRay Plus LED600 3-Light Kit laid out, including three light fixtures, barndoors, diffusion filters, power adapters, remote controls, and carrying cases.
Image 2.2: The Dracast BoltRay Plus LED600 3-Light Kit fully assembled on light stands, with the soft nylon carrying case in the foreground.
3. Configuració
Follow these steps to set up your Dracast BoltRay Plus LED600 light fixture:
- Muntatge de la llum: Attach the light fixture, using its integrated U-shaped yoke, to a compatible light stand or mounting accessory. Ensure the mounting knob is securely tightened.
- Attaching Barndoors: Align the 4-way barndoors with the front of the light fixture and secure them using the locking mechanism. The barndoors allow for shaping the light beam.
- Installing Diffusion Filter: If softer light is desired, insert the removable diffusion filter into the designated slot on the front of the light, behind the barndoors.
- Alimentació de la llum:
- Alimentació CA: Connect the multi-voltage AC power adapter to the DC input port on the light fixture. Plug the other end into a suitable power outlet.
- Potència de la bateria: For portable operation, insert two compatible NP-F type batteries (sold separately) into the dual battery plates on the rear of the light fixture. Ensure correct polarity.
Imatge 3.1: Un primer pla view of the Dracast BoltRay Plus LED600 light head, showing the central COB LED, attached 4-way barndoors, and the blue mounting bracket.
4. Instruccions de funcionament
The Dracast BoltRay Plus LED600 offers precise control over light intensity and color temperature.
4.1. Funcionament del tauler de control
The control panel is located on the rear of the light fixture and features an LCD digital display and control knobs.
Imatge 4.1: Lateral view of the Dracast BoltRay Plus LED600 light, highlighting the rear control panel with its LCD display, control knobs, and power input ports.
- Encès/apagat: Locate the power switch on the control panel and toggle it to the 'ON' position. The LCD display will illuminate.
- Adjusting Intensity (Dimming): Use the "INTENSITY" control knob to adjust the light output from 0% to 100%. The current intensity level will be shown on the LCD display.
- Ajust de la temperatura del color: Use the "COLOR TEMP" control knob to change the color temperature from 3200K (warm tungsten) to 5600K (cool daylight). The selected color temperature will be displayed.
4.2. Operació de control remot
The included remote control allows for wireless adjustment of intensity and color temperature.
- Assegureu-vos que el comandament a distància tingui piles que funcionen.
- Point the remote control towards the light fixture's sensor.
- Use the designated buttons on the remote to increase/decrease intensity and adjust color temperature. Refer to the remote's markings for specific functions.
5. Manteniment
- Neteja: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the light fixture. Do not use harsh chemicals or abrasive cleaners.
- Emmagatzematge: When not in use, store the light kit in the provided travel case in a cool, dry place, away from direct sunlight and excessive dust.
- Cura de la bateria: If using NP-F batteries, remove them from the fixture during extended periods of non-use to prevent discharge or leakage.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power, faulty connection, dead batteries. | Check power cable connection. Ensure AC adapter is plugged in. If using batteries, check battery charge or replace. Verify power switch is ON. |
| La llum parpelleja o és inestable. | Loose power connection, low battery, interference. | Secure all power connections. Recharge or replace batteries. Move away from potential sources of electromagnetic interference. |
| El comandament a distància no funciona. | Dead batteries, obstructed signal, out of range. | Replace remote control batteries. Ensure a clear line of sight to the light's sensor. Operate within the specified range. |
| La llum és massa calenta. | Blocked ventilation, prolonged use in high ambient temperature. | Ensure ventilation openings are clear. Operate in a well-ventilated area. Reduce intensity if necessary. |
7. Especificacions
| Característica | Detall |
|---|---|
| Model | DRBRPLLK3X600BH |
| Tipus de llum | LED COB bicolor |
| Temperatura de color | 3200K - 5600K (Variable) |
| Índex de reproducció del color (CRI) | 96 |
| Atenuació | 0-100% (PWM Technology) |
| Angle del feix | 45 graus |
| Consum d'energia | 60W per fixture |
| Entrada de potència | Multivoltage AC adapter, Dual NP-F battery plates |
| Refrigeració | Virtually silent fan |
| Construcció | Metall i plàstic |
| Dimensions (per llum) | 13.7 x 6.1 x 13.5 polzades |
| Pes (kit) | 12.5 lliures |
8. Garantia i Suport
Dracast products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Dracast website. For technical support or service inquiries, please contact Dracast customer service directly.
Fabricant: Draco Broadcast, INC.
Weblloc: www.dracast.com
