1. Producte acabatview
The Klein Tools 66001 is a versatile 2-in-1 impact socket designed for efficiency and durability. This single-ended deep socket features hands-free adjustment between 3/4-inch and 9/16-inch hex sizes, making it ideal for various applications, particularly pole hardware installation and removal. Its high-torque, 12-point design facilitates easier positioning and compatibility with square fasteners.
Image 1.1: The Klein Tools 66001 2-in-1 Impact Socket, showcasing its compact design and size markings.
2. Informació de seguretat
Always prioritize safety when using any tools. Adhere to the following guidelines:
- Protecció ocular: Always wear approved eye protection to prevent injury from flying debris.
- Compatibilitat d'eines: Ensure the socket is correctly matched to the impact driver and fastener size.
- Adherència segura: Maintain a firm grip on the impact driver during operation.
- Inspeccionar l'eina: Before each use, inspect the socket for any signs of wear, damage, or cracks. Do not use damaged tools.
- Emmagatzematge adequat: Store the socket in a dry, secure location away from moisture and extreme temperatures.
3. Característiques del producte
The Klein Tools 66001 Impact Socket incorporates several features designed for professional use:
- Disseny 2 en 1: Integrates two coaxial spring-loaded hex socket sizes (3/4-Inch and 9/16-Inch) into a single tool for hands-free adjustment.
- Deep Socket: Provides extended reach for various applications, including pole hardware installation and removal.
- 1/2-Inch Drive: Compatible with standard 1/2-inch drive impact drivers.
- Disseny de 12 punts: High-torque 12-point configuration allows for easier positioning and effective use with square fasteners.
- Cross Hole Design: Engineered to prevent unintentional separation of the adapter and socket, enhancing safety and reliability.
- Impact Driver Compatibility: Specifically designed for use with impact drivers, including Klein's 1/2-Inch Compact Impact Wrench (Cat Nos. BAT20-CW, BAT20-CW1).
Image 3.1: Diagram illustrating the key features of the Klein Tools 2-in-1 Impact Socket, including its dual sizes and 12-point design.
4. Instruccions de funcionament
Follow these steps for proper operation of your Klein Tools 66001 Impact Socket:
- Seleccioneu la mida correcta: The socket automatically adjusts between 3/4-inch and 9/16-inch hex sizes. Simply align the appropriate end with your fastener.
- Attach to Impact Driver: Securely attach the 1/2-inch drive end of the socket to a compatible impact driver. Ensure it is fully seated and locked into place.
- Position on Fastener: Place the socket firmly onto the fastener (nut or bolt head). The 12-point design allows for easier engagement.
- Operate Impact Driver: Activate your impact driver to tighten or loosen the fastener. Apply steady pressure and maintain control of the tool.
- Pole Hardware: For pole hardware installation and removal, the deep socket design provides necessary clearance.
Image 4.1: Demonstrating the Klein Tools 66001 socket attached to an impact driver for fastener removal.
Image 4.2: The Klein Tools 66001 in use on pole hardware, highlighting its deep socket capability.
Video 4.1: An official video demonstrating the features and hands-free adjustment of Klein Tools Impact Sockets, including the 2-in-1 design for various applications.
5. Especificacions
| Número de model | 66001 |
| Marca | EINES KLEIN |
| Mides de socket | 3/4-Inch and 9/16-Inch Hex |
| Mida de la unitat | 1/2 polzada |
| Estil de punt | 12-punts |
| Material | Acer d'aliatge |
| Tipus d'acabat | Raspallat |
| Pes de l'article | 8 unces |
| Característiques especials | Hands-free Adjustment, Deep Socket |
| Components inclosos | Endoll d'impacte |
6. Manteniment
To ensure the longevity and optimal performance of your Klein Tools 66001 Impact Socket, follow these maintenance guidelines:
- Neteja: After each use, wipe the socket clean of any dirt, grease, or debris. A mild solvent can be used for stubborn grime, followed by thorough drying.
- Lubricació: Periodically apply a light coat of rust-preventative oil to the socket, especially if stored in humid conditions, to prevent corrosion.
- Inspecció: Regularly inspect the socket for signs of wear, such as rounded edges, cracks, or deformation. Replace the socket if any significant damage is observed.
- Emmagatzematge: Store the socket in a tool box or on a tool rack to protect it from impacts and environmental damage.
7. Solució De Problemes
If you encounter issues while using your Klein Tools 66001 Impact Socket, consider the following:
- Socket Not Engaging Fastener: Ensure the fastener size is either 3/4-inch or 9/16-inch hex. Verify that the socket is clean and free of obstructions.
- Socket Sticking to Fastener: This can occur due to overtightening or corrosion. Ensure proper torque is applied and keep the socket clean and lubricated.
- Socket Not Fitting Impact Driver: Confirm your impact driver has a 1/2-inch square drive. Ensure the socket's drive end is clean and free of damage.
- Desgast excessiu: Using the socket with an improperly sized fastener or applying excessive force can lead to premature wear. Always use the correct size and avoid over-torquing.
8. Garantia i Suport
The Klein Tools 66001 2-in-1 Impact Socket is covered by a 1 anys de garantia del fabricant. For warranty claims, technical support, or additional product information, please contact Klein Tools directly or visit their official weblloc.
Podeu trobar més informació i dades de contacte a KLEIN TOOLS Store.
