Estink Digital Projection Alarm Clock User Manual

Introducció

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Estink Digital Projection Alarm Clock. This versatile device features a digital LCD display, voice talking function, temperature display, and a projection feature to display time on your ceiling or wall. Please read this manual thoroughly before using the product to ensure proper function and longevity.

Informació de seguretat

• No exposeu el dispositiu a temperatures extremes, llum solar directa ni humitat elevada.
• Eviteu deixar caure o sotmetre el dispositiu a forts impactes.
• No intenteu desmuntar ni reparar el dispositiu vosaltres mateixos. Encarregueu tot el manteniment a personal qualificat.
• Mantenir fora de l'abast dels nens.
• Use only the specified power source (AAA batteries or USB cable).

Contingut del paquet

• 1 x Estink LED Projector Alarm Clock
• 1 x Manual d'usuari

Producte acabatview

Familiarize yourself with the components of your Estink Digital Projection Alarm Clock.

Figura 1: Frontal View with Projection. This image shows the front of the Estink Digital Projection Alarm Clock, displaying the time and temperature on its LCD screen. Above the clock, a red projection of "12:00" is visible, indicating the time projection feature.

Figura 2: posterior View amb Controls. This image displays the back of the Estink Digital Projection Alarm Clock, highlighting the control buttons. From left to right, the buttons are labeled "HR" (Hour), "MIN" (Minute), "MODE", and "TALKING" (with an ON/OFF switch). Below these, there's a "12/24" button and a "SOUND" button. A battery compartment cover is visible at the bottom.

Figura 3: lateral View. This image shows the Estink Digital Projection Alarm Clock from a side angle, held in a hand. The digital display shows "8:45" and "78°", indicating time and temperature. The overall compact size of the clock is evident.

Funcions del botó:

• RRHH: Adjusts the hour.
• MIN: Adjusts the minute.
• Mode: Cycles through time setting, alarm setting, and normal display modes.
• TALKING (ON/OFF Switch): Toggles the voice talking function.
• 12/24: Switches between 12-hour and 24-hour time formats.
• SO: Selects alarm tones.

Configuració

Powering the Clock:

The Estink Digital Projection Alarm Clock can be powered by batteries or a USB cable.

1. Instal·lació de la bateria: Open the battery compartment cover on the back of the clock. Insert 3 x AAA batteries (not included), ensuring correct polarity (+/-).
2. Potència USB: For continuous display light, connect a USB cable (not included) to the clock's USB port and to a USB power adapter or computer.

Note: When powered by batteries alone, the display light will not stay on continuously to conserve power. The USB cable must be plugged in for the display light to remain illuminated.

Instruccions de funcionament

Configuració de l'hora:

1. Premeu el botó MODE Premeu el botó una vegada per entrar al mode de configuració de l'hora. Els dígits de les hores parpellejaran.
2. Premeu el botó HR per ajustar l’hora.
3. Premeu el botó MIN per ajustar el minut.
4. Premeu el botó MODE button again to confirm and exit time setting.
5. Per canviar entre el format de 12 hores i el de 24 hores, premeu la tecla 12/24 botó.

Configuració de l'alarma:

1. Premeu el botó MODE button twice to enter alarm setting mode. The alarm hour digits will flash.
2. Premeu el botó HR per ajustar l’hora de l’alarma.
3. Premeu el botó MIN botó per ajustar el minut de l'alarma.
4. Premeu el botó MODE button again to confirm and exit alarm setting.
5. To select an alarm tone, press the SO button. There are five different tones available.

Funció de posposar:

When the alarm sounds, press any button (except the TALKING switch) to activate the 10-minute snooze function. The alarm will sound again after 10 minutes.

Voice Talking Function:

Feu lliscar el PARLANT switch to the "ON" position to enable the voice talking function. The clock will announce the current time.

Funció de projecció:

The clock projects the accurate time for up to 10 seconds. The projecting angle is 60 degrees. The projected time will appear with a black font and a random blue or green backlight.

Note: The projection feature is designed for temporary display. For continuous projection, ensure the clock is connected via USB power.

Visualització de la temperatura:

The clock automatically displays the current temperature on its LCD screen.

Manteniment

• Neteja: Netegeu el rellotge amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Substitució de la bateria: When the display dims or the clock functions become erratic, replace the AAA batteries. Ensure the clock is powered off or disconnected from USB before replacing batteries.
• Emmagatzematge: Si guardeu el rellotge durant un període prolongat, traieu-ne les piles per evitar fuites.

Resolució de problemes

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Estink weblloc web. Conserveu el rebut de compra com a comprovant de compra.