AKO D14012 12V Panel-Mounted Digital Temperature Display User Manual

1. Introducció

This user manual provides detailed instructions for the installation, operation, and maintenance of the AKO D14012 12V Panel-Mounted Digital Temperature Display. This device is designed for precise temperature indication in either Celsius (°C) or Fahrenheit (°F), featuring selectable NTC/PTC probe programs and a simple single-button interface for settings. Please read this manual thoroughly before using the device to ensure correct operation and to prevent damage.

2. Informació de seguretat

• Seguretat elèctrica: Ensure the power supply is disconnected before installation or maintenance. The device operates on 12V DC. Incorrect voltagLa polaritat o el voltatge poden danyar la unitat.
• Instal·lació: Installation should only be performed by qualified personnel. Follow all local electrical codes and regulations.
• Medi ambient: No exposeu el dispositiu a una humitat excessiva, pols ni temperatures extremes fora del rang de funcionament especificat.
• Manipulació de la sonda: Handle the temperature probe carefully. Do not bend or crimp the cable excessively.
• Neteja: Utilitzeu un drap suau i sec per netejar. No utilitzeu netejadors abrasius ni dissolvents.

3. Contingut del paquet

Verifiqueu que tots els elements estiguin presents i no estiguin danyats en obrir el paquet:

• AKO D14012 Digital Temperature Display Unit
• Temperature Probe (NTC/PTC compatible)
• Clips de muntatge (2 unitats)

Figura 3.1: Contents of the AKO D14012 package, showing the main display unit, the coiled temperature probe, and two mounting clips.

4. Producte acabatview

The AKO D14012 is a compact digital temperature display designed for integration into control panels. It features a clear digital display for temperature readings and a single "SET" button for configuration. The unit is powered by 12V DC and connects to an external temperature probe.

4.1. Components clau

• Pantalla digital: Mostra la temperatura actual.
• Botó SET: Used to access and adjust device settings and parameters.
• Probe Input: Connection point for the NTC/PTC temperature sensor.
• Entrada d'alimentació: Terminals for 12V DC power supply.

5. Configuració

5.1. Muntatge en panell

The AKO D14012 is designed for panel mounting. Create an opening in your control panel with the following dimensions:

• Amplada: 70.5 mm
• Alçada: 28.5 mm

Insert the display unit into the opening and secure it using the provided mounting clips on the sides of the unit.

Figura 5.1: Panel cutout dimensions and rear wiring diagram for the AKO D14012 unit.

5.2. Connexions de cablejat

Refer to Figure 5.1 for the wiring diagram. Ensure power is disconnected before making any connections.

1. Connexió de la sonda: Connect the temperature probe to the designated terminals on the left side of the unit (labeled "Sonda" in the diagram).
2. Font d'alimentació: Connect the 12V DC power supply to the terminals on the right side. Ensure correct polarity: connect 12V to the positive terminal and 0V to the negative terminal (labeled "12V=" and "0V" respectively in the diagram). The device is designed for 12V DC operation.

After all connections are made, you can apply power to the unit.

6. Instruccions de funcionament

6.1. Encès

Once correctly wired and powered, the display will illuminate and show the current temperature measured by the probe.

6.2. Viewing temperatura

The primary function of the device is to continuously display the temperature. The reading will update automatically as the temperature changes.

6.3. Accessing Settings (SET Button)

The "SET" button is used to access and modify various parameters of the device, such as temperature units (°C/°F) and probe type (NTC/PTC). Specific programming steps will depend on the firmware version. Generally:

• Premsa curta: May display a specific parameter or confirm a selection.
• Premsa llarga: Typically enters programming mode or saves changes.

Consult the full programming guide for detailed instructions on setting specific parameters, including temperature alarms or calibration, if applicable to your model.

7. Manteniment

7.1. Neteja

To clean the display unit, gently wipe the surface with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the display or casing.

7.2. Probe Inspection

Periodically inspect the temperature probe and its cable for any signs of damage, wear, or corrosion. Replace the probe if any damage is observed to ensure accurate readings.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

For warranty information, technical support, or service inquiries, please contact your local AKO distributor or the point of purchase. Keep your purchase receipt as proof of purchase for warranty claims.