1. Introducció
The OSRAM Encelium SCP-1500 is a 24V ceiling-mount Passive Infrared (PIR) occupancy sensor designed for efficient lighting control. This sensor detects motion within its coverage area, automatically controlling connected lighting or other systems to save energy. It features a 360-degree sensing angle and a maximum coverage range of 1500 feet, making it suitable for various commercial and industrial applications.
This manual provides detailed instructions for the installation, operation, and maintenance of your SCP-1500 sensor.
2. Informació de seguretat
- Risc elèctric: La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
- Disconnect power at the circuit breaker or fuse before installing or servicing the sensor.
- Ensure the power supply is 24V as specified. Connecting to an incorrect voltagPot danyar el dispositiu i representar un risc per a la seguretat.
- Do not install in locations with excessive vibration, extreme temperatures, or high humidity.
- Aquest dispositiu només està dissenyat per a ús interior.
3. Contingut del paquet
Verifiqueu que hi hagi tots els elements abans de començar la instal·lació:
- OSRAM Encelium SCP-1500 PIR Occupancy Sensor Unit
- Maquinari de muntatge (cargols, ancoratges)
- Manual d'usuari (aquest document)
4. Configuració i instal·lació
4.1 Consideracions prèvies a la instal·lació
- A 24 Volt power pack is required for operation (not included).
- The sensor is designed for ceiling mount installation. Choose a central location within the desired coverage area, free from obstructions.
- Avoid mounting near HVAC vents, windows, or other sources of rapid temperature changes, as these can cause false triggers.
- Ensure the mounting surface is stable and can support the sensor's weight.
4.2 Muntatge del sensor
- Desconnecteu l'alimentació: Before starting, ensure power to the installation area is turned off at the circuit breaker.
- Seleccioneu la ubicació: Identify the optimal ceiling location for 360-degree coverage.
- Preparació del cablejat: Route the 24V low-voltage wiring from the power pack to the chosen mounting location.
- Base segura: Use the provided mounting hardware to securely attach the sensor's base to the ceiling.
- Connexions de cable: Connect the 24V power and control wires to the sensor terminals as per the wiring diagram provided with your power pack or system controller. Ensure correct polarity.
- Attach Sensor Body: Once wiring is complete and secure, attach the main sensor body to the mounted base, typically by twisting or snapping it into place.
- Restaura l'alimentació: After installation is complete and all connections are secure, restore power to the circuit.
Figura 1: superior view of the OSRAM Encelium SCP-1500 PIR Occupancy Sensor. This image shows the sensor's dome-shaped design with the central PIR lens, indicating its ceiling-mount orientation.
Figura 2: lateral view of the OSRAM Encelium SCP-1500 PIR Occupancy Sensor. This image highlights the low-profile design and the slight protrusion of the PIR lens from the main body.
5. Funcionament
The OSRAM Encelium SCP-1500 sensor operates using Passive Infrared (PIR) technology to detect changes in infrared radiation caused by human movement. When motion is detected within its 360-degree coverage area (up to 1500 feet), the sensor signals the connected lighting control system to activate or maintain lighting.
- Activació automàtica: Upon detecting occupancy, the sensor will signal the connected system to turn on lights or other controlled devices.
- Occupancy Hold: As long as occupancy is detected, the sensor will maintain the active state.
- Desactivació automàtica: After a period of no detected motion (determined by the connected control system's settings), the sensor will signal the system to turn off lights or devices.
Note: Specific delay times and sensitivity adjustments are typically configured through the connected Encelium lighting control system, not directly on the SCP-1500 sensor itself. Refer to your Encelium system documentation for configuration details.
6. Manteniment
- Neteja: Periodically clean the sensor lens with a soft, dry cloth to ensure optimal performance. Do not use abrasive cleaners or solvents.
- Inspecció: Regularly inspect the sensor for any physical damage or loose connections.
- Obstruccions: Assegureu-vos que el camp de sensor view remains unobstructed by new fixtures, furniture, or other objects.
Desconnecteu sempre l'alimentació abans de realitzar qualsevol manteniment.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El sensor no detecta moviment. |
|
|
| Lights turn on/off unexpectedly (false triggers). |
|
|
| Sensor is powered but lights do not respond. |
|
|
If the problem persists after attempting these solutions, contact OSRAM technical support or a qualified electrician.
8. Especificacions
| Número de model | SCP-1500 |
| Marca | OSRAM Encelium |
| Font d'alimentació | 24 Volts (Power Pack Required) |
| Tipus de sensor | Passive Infrared (PIR) Occupancy Sensor |
| Tipus de muntatge | Muntatge al sostre |
| Angle de detecció | 360 graus |
| Maximum Coverage Range | 1500 peus |
| Color | Blanc |
| Pes de l'article | 1 Pound (approx.) |
| Dimensions del producte | 5 x 5 x 3 polzades (aprox.) |
| UPC | 046135453649 |
9. Garantia i Suport
For warranty information, please refer to the documentation provided with your purchase or visit the official OSRAM Encelium website. OSRAM provides technical support for its products.
If you require assistance with installation, troubleshooting, or have questions about your SCP-1500 sensor, please contact OSRAM customer support through their official channels.
Oficial d'OSRAM Weblloc: www.osram.com
