OSRAM Encelium SCP-0450 PIR Occupancy Sensor User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the OSRAM Encelium SCP-0450 PIR Occupancy Sensor. This device is designed to detect motion using passive infrared technology, enabling automated control of lighting or other systems in commercial and industrial environments.

The SCP-0450 is a 24V ceiling-mount sensor offering a 360-degree sensing angle and up to 450 feet of coverage, making it suitable for large areas.

1.1 Característiques clau

• 24 Volt Power Pack Required
• Instal·lació de muntatge al sostre
• 450 Feet of Coverage (Passive Infrared)
• 360 Degree Sensing Angle
• Acabat blanc

1.2 Contingut del paquet

• 1 x OSRAM Encelium SCP-0450 PIR Occupancy Sensor
• Guia d'instal·lació (aquest document)

2. Informació de seguretat

Please read all safety instructions before installing or operating the sensor. Failure to follow these instructions may result in electric shock, fire, or property damage.

• Risc elèctric: La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
• Desconnexió d'alimentació: Always disconnect power at the circuit breaker or fuse box before performing any wiring or service.
• Voltage Requisit: This device requires a 24 Volt power pack. Do not connect to higher voltage subministraments.
• Només per a ús interior: This sensor is designed for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
• Muntatge: Ensure the mounting surface is structurally sound and can support the weight of the sensor.

3. Configuració i instal·lació

The OSRAM Encelium SCP-0450 sensor is designed for ceiling mount installation. Proper placement is crucial for optimal performance.

3.1 Triar una ubicació d'instal·lació

• Select a central location on the ceiling to maximize the 360-degree sensing angle and 450 feet of coverage.
• Avoid placing the sensor near heat sources (e.g., HVAC vents, incandescent lights) or in direct sunlight, as these can cause false triggers.
• Ensure there are no obstructions (e.g., tall shelves, partitions) that could block the sensor's line of sight to the detection area.

3.2 Instruccions de cablejat

1. Apagueu l'alimentació: Before beginning any wiring, ensure power to the circuit is OFF at the breaker.
2. Preparació del cablejat: Route the 24V low-voltage wiring from the required 24V power pack to the chosen ceiling mount location.
3. Connecteu els cables: Connect the sensor's wires to the 24V power pack output according to the wiring diagram provided with your power pack. Typically, this involves connecting the positive (+) and negative (-) terminals. Refer to the specific wiring diagram for your Encelium system components.
4. Connexions segures: Assegureu-vos que totes les connexions dels cables estiguin segures i correctament aïllades.

3.3 Muntatge del sensor

1. Fixeu el suport de muntatge: Secure the sensor's mounting bracket (if applicable, typically integrated) to the ceiling using appropriate screws and anchors.
2. Sensor de posició: Carefully attach the sensor body to the mounting bracket, ensuring it is firmly seated.
3. Verify orientation: Ensure the sensor is oriented correctly for optimal coverage of the desired area.

Figura 1: superior view of the OSRAM Encelium SCP-0450 PIR Occupancy Sensor. This image shows the sensor's dome-shaped lens for 360-degree motion detection.

Figura 2: Angle view of the OSRAM Encelium SCP-0450 PIR Occupancy Sensor. This image highlights the compact, white design suitable for ceiling installation.

4. Instruccions de funcionament

The OSRAM Encelium SCP-0450 is a passive infrared (PIR) occupancy sensor. It operates by detecting changes in infrared radiation caused by the movement of people within its detection zone.

4.1 Encès

Once installation and wiring are complete, restore power to the circuit at the breaker. The sensor will typically undergo a brief warm-up period (e.g., 30-60 seconds) during which it may not respond to motion or may exhibit inconsistent behavior. Refer to your Encelium system's main controller documentation for specific warm-up indicators.

4.2 Detecció de moviment

The sensor continuously monitors its 360-degree coverage area for motion. When motion is detected, it sends a signal to the connected Encelium lighting control system or other compatible devices. The system then responds according to its programmed settings (e.g., turning lights on, adjusting light levels).

The sensor's effectiveness is highest when detecting motion across its field of view rather than directly towards or away from it.

4.3 Àrea de cobertura

The SCP-0450 provides up to 450 feet of coverage. The actual effective range can vary based on ceiling height, ambient temperature, and the type of motion being detected. For optimal performance, ensure the sensor is positioned to cover the primary areas of activity.

5. Manteniment

The OSRAM Encelium SCP-0450 sensor requires minimal maintenance to ensure continued optimal performance.

• Neteja: Periodically clean the sensor lens with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the lens or internal components.
• Inspecció: Annually inspect the sensor for any physical damage or loose connections. Ensure the mounting is secure.
• No hi ha peces reparables per l'usuari: The sensor contains no user-serviceable parts. Do not attempt to open or repair the unit. Contact qualified personnel for service.

6. Solució De Problemes

If the sensor is not performing as expected, review els següents problemes i solucions habituals:

If problems persist after attempting these solutions, contact OSRAM technical support or a qualified service professional.

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or service inquiries regarding your OSRAM Encelium SCP-0450 sensor, please refer to the official OSRAM Encelium website or contact their customer support directly. Specific warranty terms and conditions may vary by region and purchase date.

Please have your product model number (SCP-0450) and purchase details available when contacting support.