1. Introducció
Thank you for choosing the Einhell GE-DP 7935 N-A ECO immersible waste water pump. This manual provides important information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new pump. Please read these instructions carefully before using the product and keep them for future reference.
2. Instruccions de seguretat
Advertències generals de seguretat:
- Always disconnect the pump from the power supply before performing any maintenance, cleaning, or when the pump is not in use.
- Assegureu-vos que la font d'alimentació voltage matches the rating on the pump's label.
- Do not operate the pump if the power cable or plug is damaged. Have it repaired by a qualified electrician.
- Never lift or carry the pump by its power cable. Use the integrated carrying handle.
- The pump is designed for pumping water. Do not use it for flammable, corrosive, or explosive liquids.
- Ensure the pump is placed on a stable surface and cannot tip over during operation.
- Mantingueu els nens i les persones no autoritzades allunyats de la zona d'operació.
- The maximum water temperature for operation is 35° Celsius (95°F).
3. Descripció i característiques del producte
The Einhell GE-DP 7935 N-A ECO is a robust immersible pump designed for pumping waste water, and can also be used with clear water. It is suitable for applications such as emptying ponds, construction pits, and flooded basements. The pump incorporates Einhell's ECO-Power technology for high efficiency with low energy consumption.
Image showing the Einhell GE-DP 7935 N-A ECO immersible waste water pump, highlighting its compact design and carrying handle.
Característiques principals:
- Aqua-Sensor Technology: Einhell's patented system for automatic switching on and off based on water level, replacing a traditional float switch.
- Mode continu: Option for continuous operation independent of water level.
- ECO-Power Technology: Ensures high delivery capacity with reduced energy consumption.
- Vàlvula antiretorn: Prevents backflow of water.
- Segell mecànic: High-quality sliding ring seal protects the motor from dirt, ensuring a long service life.
- Ergonomic Carrying Handle: For easy transport and lowering of the pump.
- Construcció duradora: Housing made of high-quality impact-resistant plastic and stainless steel.
4. Especificacions tècniques
| Especificació | Valor |
|---|---|
| Número de model | GE-DP 7935 N-A ECO (4171460) |
| Poder | 790 W |
| Caudal màxim | 19,000 litres per hora |
| Alçada màxima d'elevació (capçal) | 9 metres |
| Maximum Immersion Depth | 7 metres |
| Temperatura màxima de l'aigua | 35° Celsius |
| Max. Dirt Particle Size | 35 mm |
| Connexió de mànega | 47.8 mm (1½ male thread) |
| Voltage | 230 Volts |
| Longitud del cable d'alimentació | 10 metres |
| Pes de l'article | 6.71 quilograms (14.76 lliures) |
| Dimensions del producte (L x A x A) | 10.63" x 6.69" x 18.5" |
| Material | Stainless Steel, Impact-resistant Plastic |
5. Configuració
5.1 Desembalatge:
- Traieu amb cura la bomba i tots els accessoris de l'embalatge.
- Check for any damage during transit. Do not operate a damaged pump.
- Ensure all included components (wastewater pump, universal connection) are present.
5.2 Connexió de la mànega:
- Connect a suitable discharge hose to the pump's universal connection. The pump features a 47.8 mm (1½ male thread) connection.
- Ensure the connection is secure and watertight to prevent leaks.
5.3 Placement and Immersion:
- Place the pump on a firm, level surface in the water to be pumped.
- Ensure the pump is fully immersed in the water. The maximum immersion depth is 7 meters.
- Use the carrying handle and hanging eyelet to safely lower the pump into deeper areas.
5.4 Connexió d'alimentació:
- Connecteu l'endoll a una presa de corrent amb connexió a terra correcta.
- Ensure the power cable is not kinked, stretched, or submerged in water during operation.
6. Funcionament
The Einhell GE-DP 7935 N-A ECO pump offers two operating modes: Aqua-Sensor mode and Continuous mode.
6.1 Aqua-Sensor Mode:
- The Aqua-Sensor technology automatically switches the pump on and off based on the water level.
- The sensor detects the water level and activates the pump when the water reaches a preset level, and deactivates it when the water drops below a certain level.
- Refer to the specific settings on your pump for adjusting the Aqua-Sensor activation and deactivation levels.
6.2 Continuous Mode:
- For continuous operation, the pump can be set to bypass the Aqua-Sensor.
- In this mode, the pump will run continuously as long as it is connected to power and immersed in water.
- Monitor the water level manually in continuous mode to prevent dry running, which can damage the pump.
6.3 Pumping Considerations:
- The pump can handle dirt particles up to 35 mm in diameter. Larger particles may cause blockages or damage.
- Ensure the discharge hose is clear and unobstructed to maintain optimal flow rate.
- Avoid pumping water with temperatures exceeding 35° Celsius.
7. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim de la bomba.
7.1 Cleaning the Pump:
- After each use, especially when pumping dirty water, rinse the pump thoroughly with clean water.
- Remove any debris or foreign objects that may have accumulated around the intake screen or impeller area.
- Desconnecteu sempre de l'alimentació abans de netejar.
7.2 Inspecting Components:
- Periodically check the power cable and plug for any signs of damage or wear.
- Inspect the hose connection for leaks or damage.
- Ensure the non-return valve is functioning correctly and not obstructed.
- The mechanical seal is designed for durability, but if you notice water leakage from the motor housing, contact customer support.
7.3 Winter Storage:
- If storing the pump for an extended period, especially in freezing temperatures, ensure all water is drained from the pump and hose.
- Guardeu la bomba en un lloc sec i sense gelades.
8. Solució De Problemes
Before contacting customer support, try these troubleshooting steps for common issues:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca. | Sense font d'alimentació. Aqua-Sensor not activated (water level too low). Protecció del motor activada. | Comproveu la connexió d'alimentació i el fusible. Ensure water level is above Aqua-Sensor activation point or switch to continuous mode. Allow pump to cool down; check for blockages. |
| Low pumping capacity. | Intake screen blocked. Hose kinked or obstructed. Aire a la bomba. | Clean the intake screen. Reviseu i netegeu la mànega de descàrrega. Immerse pump fully and ensure no air pockets. |
| Pump runs continuously in Aqua-Sensor mode. | Aqua-Sensor malfunction or debris interfering with sensor. | Clean the Aqua-Sensor area. If problem persists, contact support. |
| La bomba s'atura inesperadament. | Sobreescalfament (protecció tèrmica). Interrupció elèctrica. | Disconnect power, allow to cool, check for blockages. Reconnect power. Comproveu la font d'alimentació. |
9. Garantia i Suport
For warranty information, please refer to the separate warranty document included with your purchase or visit the official Einhell weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
If you encounter issues not covered in this manual or require technical assistance, please contact Einhell customer support. Contact details can typically be found on the product packaging or the official Einhell weblloc.
Recursos en línia: For additional support, FAQs, and product information, visit the official Einhell weblloc.
