Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your Anchor Audio Beacon 2 Portable Sound System. Please read this manual thoroughly before using the system to ensure optimal performance and longevity.
The Anchor Audio Beacon 2 is a highly portable all-in-one PA system designed for mid-size events. It features a line array configuration with multiple speakers and subwoofers, offering clear and powerful audio output. Its compact, foldable design with built-in wheels and a retractable handle ensures easy transport.
Producte acabatview
Figure 1: The Beacon 2 system in its folded, compact configuration, ready for transport. This view highlights the integrated wheels and retractable handle.
Figure 2: The Beacon 2 system fully unfolded and extended, showcasing its line array speaker configuration for optimal sound dispersion during operation.
Figura 3: Detallada view of the rear control panel, showing various inputs, outputs, volume controls, and the AIR Companion Transmitter section.
Configuració
Unfolding the System
- Place the Beacon 2 on a flat, stable surface.
- Release the latches securing the speaker array.
- Carefully extend the speaker array upwards until it locks into place. Ensure all sections are securely seated.
Encès
- Ensure the system's internal batteries are charged. Connect the power cable to a standard AC outlet if charging is needed or for continuous operation.
- Locate the main power switch on the rear panel (refer to Figure 3).
- Flip the switch to the 'ON' position. The power indicator light should illuminate.
Instruccions de funcionament
Connexió de micròfons
- The Beacon 2 supports up to four wireless microphones via its two dual wireless mic receivers.
- For wired microphones, connect them to the universal microphone jacks on the rear panel.
- Adjust the individual volume controls for each microphone input as needed.
Transmissió Bluetooth
- Activa el Bluetooth al teu telèfon intel·ligent o tauleta.
- On the Beacon 2's rear panel, press the Bluetooth pairing button. The Bluetooth indicator light will flash.
- Select "Anchor Audio Beacon 2" from the list of available devices on your smart device.
- Once paired, the Bluetooth indicator light will become solid. You can now stream audio wirelessly.
Entrades auxiliars
The system includes 3.5mm and 1/4-inch aux inputs for connecting external audio sources such as laptops, MP3 players, or other audio devices. Use the corresponding volume controls to adjust the input level.
Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior surfaces of the system. Avoid using abrasive cleaners or solvents.
- Cura de la bateria: For optimal battery life, fully charge the system after each use. If storing for extended periods, charge the battery every 3-6 months.
- Emmagatzematge: Store the Beacon 2 in its folded, compact position in a cool, dry place away from direct sunlight and extreme temperatures.
- Inspecció: Periodically inspect cables, connectors, and the speaker array for any signs of wear or damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so | System not powered on; Volume too low; Incorrect input selected; Faulty cable/microphone. | Ensure power switch is ON; Increase master and input volumes; Verify correct input connection; Test with different cables/microphones. |
| Bluetooth no emparellat | Beacon 2 not in pairing mode; Device too far; Interference. | Press Bluetooth pairing button; Move device closer to Beacon 2; Turn off other Bluetooth devices nearby. |
| Durada de la bateria curta | Bateria no completament carregada; Bateria antiga. | Ensure full charge before use; Consider battery replacement if performance continues to degrade. |
Especificacions
- Model: BEA2-XU4
- Potència de sortidatage: 200 watts
- Ponents: 8 x 4-inch top speakers, 3 x 8-inch subwoofers
- Connectivitat: Bluetooth, 2x Universal Microphone Jacks, 3.5mm Aux Input, 1/4-inch Aux Input
- Micròfons sense fil: Supports up to 4 wireless mics (via 2 dual receivers)
- Font d'alimentació: Internal Rechargeable Batteries, AC Power
- Pes de l'article: 52.1 lliures (23.6 kg)
- Dimensions del producte (plegat): Aproximadament 31.7 x 20.2 x 15.9 polzades (80.5 x 51.3 x 40.4 cm)
- Fabricant: Àudio d'àncora
- UPC: 819941015376
Garantia i Suport
For warranty information and technical support, please refer to the official Anchor Audio weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Anchor Audio Official Weblloc: www.anchoraudio.com
For further assistance, you may also contact the seller, Sticky the Skunk Productions, through the Amazon platform.
