1. Producte acabatview
The Danfoss MBS3000 Pressure Transmitter, model 060G1444, is engineered for reliable pressure measurement in demanding industrial and hydraulic environments. Its robust design ensures stable performance even under severe conditions, making it suitable for a wide range of applications.
Figura 1: Davant view of the Danfoss MBS3000 Pressure Transmitter, showing the main body, electrical connector, and pressure connection.
Característiques principals:
- Designed for use in severe industrial and hydraulic environments.
- Resistant to cavitation, liquid hammer, and pressure peaks.
- Enclosure and wetted parts constructed from acid-resistant stainless steel (AISI 316L).
- Supports all standard output signals: 4-20 mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V.
- Features a wide range of pressure and electrical connections.
- Temperature compensated and laser calibrated for high accuracy.
Figura 2: Visual representation of key features, highlighting the robust construction and versatile output options of the MBS3000.
2. Especificacions
This section details the technical specifications of the Danfoss MBS3000 Pressure Transmitter.
| Especificació | Detall |
|---|---|
| Model | MBS3000 (060G1444) |
| Fabricant | Danfoss |
| Wetted Parts Material | Acid-resistant stainless steel (AISI 316L) |
| Senyals de sortida | 4-20 mA, 0-5 V, 1-5 V, 1-6 V, 0-10 V |
| Calibració | Temperature compensated and laser calibrated |
| Idoneïtat ambiental | Severe industrial and hydraulic environments, Zone 2 explosive atmospheres |
3. Configuració i instal·lació
Proper installation is crucial for the accurate and reliable operation of the MBS3000 pressure transmitter. Ensure all safety precautions are followed during installation.
3.1 Muntatge
The transmitter should be mounted in a location where it is protected from excessive vibration and extreme temperatures beyond its operating range. Ensure the pressure connection is free from obstructions and allows for proper sealing.
Figura 3: Detail of the 1/4" pressure connection, which must be securely fastened to the pressure source.
3.2 Connexió elèctrica
Connect the transmitter to the control system using appropriate cabling and according to the wiring diagram provided with the specific product variant. Ensure the power supply matches the transmitter's requirements and that all connections are secure to prevent signal loss or damage.
Figura 4: The electrical connector, showing the robust design for industrial applications.
Figura 5: Interna view of the electrical connector, illustrating the pin configuration for wiring.
Refer to the specific product datasheet for detailed wiring diagrams corresponding to the chosen output signal (e.g., 4-20 mA, 0-10 V).
4. Instruccions de funcionament
Once properly installed and powered, the Danfoss MBS3000 pressure transmitter will continuously measure the applied pressure and convert it into the specified electrical output signal. This signal can then be read by a connected control system, PLC, or display unit.
4.1 Signal Interpretation
- Sortida 4-20 mA: A common industrial standard where 4 mA typically represents the minimum pressure range and 20 mA represents the maximum pressure range. This current loop is robust against electrical noise.
- Voltage Outputs (0-5 V, 1-5 V, 1-6 V, 0-10 V): Aquestes sortides proporcionen un voltage proportional to the measured pressure. The specific voltage range corresponds to the pressure range of the transmitter.
No user calibration or adjustment is typically required after initial installation, as the unit is factory calibrated and temperature compensated.
5. Manteniment
The Danfoss MBS3000 pressure transmitter is designed for minimal maintenance due to its robust construction and high-quality materials.
5.1 Inspecció rutinària
- Inspeccioneu periòdicament el transmissor per detectar qualsevol signe de danys físics, corrosió o connexions soltes.
- Ensure the electrical cable gland is tight and free from moisture ingress.
- Check the pressure connection for leaks.
5.2 Neteja
If necessary, clean the exterior of the transmitter with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the housing or labels.
5.3 Recalibració
While the transmitter is factory calibrated, periodic recalibration may be required depending on application demands, industry standards, or if accuracy issues are suspected. Consult a qualified technician for recalibration services.
6. Solució De Problemes
This section provides basic troubleshooting steps for common issues. For complex problems, contact Danfoss technical support.
| Problema | Causa possible | Solució |
|---|---|---|
| Sense senyal de sortida | No power supply, incorrect wiring, damaged cable | Check power supply, verify wiring against diagram, inspect cable for damage |
| Lectures inexactes | Incorrect pressure range, sensor fouling, external interference, damage | Verify pressure range, clean sensor if accessible, check for EMI, inspect for damage |
| Senyal intermitent | Loose electrical connections, faulty cable, power fluctuations | Tighten all connections, replace cable, ensure stable power supply |
| Leak at pressure connection | Improper sealing, damaged thread, incorrect fitting | Ensure proper sealant/tape, check thread integrity, use correct fitting |
7. Aplicacions típiques
The Danfoss MBS3000 pressure transmitter is versatile and suitable for a broad spectrum of industrial applications where reliable pressure monitoring is essential.
Figura 6: Examples of industrial sectors where the MBS3000 pressure transmitter is commonly utilized.
Les aplicacions habituals inclouen:
- Bombes: Monitoring discharge and suction pressures to optimize pump performance and prevent cavitation.
- Compressors: Ensuring efficient operation and safety by monitoring air or gas pressure levels.
- Tractament de l'aigua: Measuring pressure in filtration systems, pipelines, and distribution networks.
- Pneumàtica: Controlling and monitoring air pressure in pneumatic systems and machinery.
- Hydraulic Systems: Critical for monitoring system pressure in hydraulic power units and actuators.
8. Garantia i Suport
For information regarding product warranty, technical support, or service, please contact Danfoss directly or your authorized Danfoss distributor. Ensure you have the product model number (MBS3000) and part number (060G1444) available when seeking support.
Visit the official Danfoss website for the latest documentation, FAQs, and contact information: www.danfoss.com
