Introducció
This manual provides essential information for the safe and effective use of your Minelab GO-FIND 44 metal detector. Please read these instructions thoroughly before operating the device to ensure optimal performance and longevity.
Figure 1: Minelab GO-FIND 44 Metal Detector Overview
Configuració
1. Desembalatge i muntatge
The Minelab GO-FIND 44 is designed for quick deployment with minimal assembly. It features a collapsible design for easy transport and storage.
- Traieu el detector del seu embalatge.
- Unfold the detector by extending the shaft until it locks into place.
- Adjust the shaft length to a comfortable operating position.
Figure 2: Collapsed Minelab GO-FIND 44 for Portability
2. Instal·lació de la bateria
The GO-FIND 44 requires 4 AAA batteries for operation.
- Localitzeu el compartiment de la bateria a la unitat de control.
- Obriu la coberta del compartiment.
- Introduïu 4 piles AAA, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
Instruccions de funcionament
1. Encès i apagat
- To power on: Press and hold the power button on the control unit until the display illuminates.
- To power off: Press and hold the power button until the display turns off.
Figure 3: GO-FIND 44 Control Panel
2. Comprensió de la pantalla i els controls
The GO-FIND 44 features an intuitive display and easy-to-use controls:
- Tresor View: This feature uses colored LEDs to indicate the type of target detected. Green typically indicates treasure (e.g., coins, jewelry), while red indicates iron or trash.
- Sensibilitat: Adjust sensitivity using the '+' and '-' buttons to optimize detection depth and reduce false signals. Higher sensitivity increases depth but can also increase noise in mineralized ground.
- Modes de cerca: Select from various search modes tailored for different target types (e.g., coins, jewelry, all metal). Refer to the on-screen icons for mode selection.
- Mode de localització precisa: Activate pinpoint mode to precisely locate the target's position before digging.
3. Ground Tracking
The automatic ground-tracking feature helps reduce noise interference from ground mineralization, maximizing target signals. This feature operates automatically, adapting to changing ground conditions.
4. Using the GO-FIND App
Enhance your detecting experience with the free GO-FIND smartphone application. This app connects to your detector via Bluetooth and offers additional functionalities.
- Download the GO-FIND app from your device's app store.
- Pair your GO-FIND 44 with your smartphone via Bluetooth.
- The app allows you to log finds, listen to music, and share your discoveries online.
Figure 4: GO-FIND Smartphone App Interface
5. Operació de camp
When sweeping the search coil, keep it parallel to the ground and move it slowly from side to side. Listen for distinct target signals and observe the Treasure View indicadors.
Figure 5: Detecting in a Hilly Environment
Figure 6: Detecting on a Beach
Official Product Video: Go Wild. Find Adventure.
This video demonstrates the Minelab GO-FIND series metal detectors in various outdoor settings, highlighting their ease of use and portability for adventure and discovery.
Manteniment
1. Neteja
- Després de cada ús, netegeu el detector amb anuncis.amp cloth to remove dirt, dust, or salt residue.
- The 10-inch search coil is waterproof; however, the control unit is not. Avoid submerging the control unit.
- No utilitzeu netejadors abrasius ni dissolvents.
2. Emmagatzematge
- Store the detector in a cool, dry place.
- Remove batteries if the detector will not be used for an extended period to prevent leakage.
- Utilize the collapsible design for compact storage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El detector no s'encén | Bateries gastades o mal instal·lades | Comproveu la polaritat de la bateria; substituïu-la per piles AAA noves. |
| Erratic signals or excessive noise | High sensitivity setting, electromagnetic interference, mineralized ground | Reduce sensitivity; move away from power lines or other electronics; allow automatic ground tracking to adjust. |
| Detector turns off unexpectedly | Low battery power, loose battery connection | Substituïu les piles; Assegureu-vos que el compartiment de la bateria estigui segur. |
| No target detection | Incorrect search mode, coil not sweeping correctly | Select an appropriate search mode; ensure coil is parallel to the ground and moving slowly. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | MINELAB |
| Número de model | 3231-0014 |
| Cerca la mida de la bobina | 10 polzades |
| Font d'alimentació | Funciona amb piles (es necessiten 4 piles AAA) |
| Pes de l'article | 2.3 lliures (1.06 kg) |
| Dimensions del producte | 51.4"L x 7.25"W x 4"H (Extended) |
| Classificació de protecció internacional | IP54 (Coil is waterproof, control unit is not) |
| Longitud ajustable | Sí |
| Material | Metall |
| UPC | 811493016641 |
Informació de la garantia
Minelab products are manufactured to high-quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Minelab weblloc.
Suport i Contacte
For technical assistance, troubleshooting beyond this manual, or to inquire about accessories, please contact Minelab customer support or visit their official weblloc.
- Assistència en línia: Visita el Botiga MINELAB a Amazon or the official Minelab weblloc web per a preguntes freqüents, registre de productes i recursos addicionals.
- Informació de contacte: Refer to your product packaging or the official Minelab website for current customer service contact details.
