B-Air VP-50 1/4 HP Air Mover Instruction Manual

Introducció

The B-Air VP-50 Air Mover is a powerful and energy-efficient unit designed for effective drying and air circulation in various environments. This manual provides essential information for the safe and optimal operation of your air mover. Please read all instructions carefully before use.

Informació de seguretat

Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.

• Ensure the unit is connected to a 110V/60Hz grounded outlet.
• Do not expose the unit to rain or use in damp ubicacions.
• Mantingueu els nens i les mascotes allunyats de la unitat durant el funcionament.
• No feu servir la unitat amb un cable o un endoll danyats.
• Keep air inlets and outlets clear of obstructions.
• Always unplug the unit before performing any maintenance or cleaning.

Producte acabatview

The B-Air VP-50 Air Mover features a robust design and powerful performance for demanding tasks.

• Motor: Powerful and energy-efficient 1/4 HP sealed motor.
• Flux d'aire: Maximum airflow capacity of 2950 CFM.
• Control de velocitat: Recessed and water-resistant 3-speed control switch.
• Posicionament: Multiple drying positions (0°, 45°, and 90°).
• Apilabilitat: Stacks firmly up to 5 units high for easy storage and transport.
• Habitatge: Extra tough, durable, and compact roto-molded housing design.
• Cable d'alimentació: 25 ft. commercial-grade power cord with wrap-around cord design.
• Estabilitat: Non-marking and anti-skid rubber feet for secure placement.
• Filtre: Optional filter kit available for added blower motor protection.

Figure 1: B-Air VP-50 1/4 HP Air Mover with handle and wheels.

Figure 2: Dimensions of the B-Air VP-50 Air Mover, showing its compact size.

Configuració

1. Desembalatge: Carefully remove the air mover from its packaging. Inspect for any damage.
2. Handle Assembly (if applicable): If your model includes a retractable handle, ensure it is securely attached and extends/retracts smoothly. Some models may require minor assembly for the handle and wheels.
3. Col·locació: Position the air mover on a stable, level surface in the area requiring drying or air circulation. Ensure adequate clearance around the air inlets and outlets.
4. Connexió d'alimentació: Unwind the 25 ft. power cord completely. Plug the unit into a standard 110V/60Hz grounded electrical outlet.

Figure 3: The B-Air VP-50 Air Mover with its handle extended for easy transport.

Instruccions de funcionament

1. Encès: Locate the recessed control switch on the unit. Turn the dial from the 'OFF' position to select your desired speed setting (1, 2, or 3).
2. Selecció de velocitat: Choose from three available speeds to adjust the airflow intensity according to your needs. Speed 1 provides the lowest airflow, while Speed 3 provides the maximum airflow of 2950 CFM.
3. Posicionament: The B-Air VP-50 can be positioned in multiple angles to direct airflow precisely where needed. It supports 0° (flat on the ground), 45°, and 90° (vertical) drying positions. Adjust the unit to optimize drying for floors, walls, or ceilings.
4. Daisy-Chaining (if applicable): The unit may feature auxiliary outlets. To connect multiple air movers, plug additional units into these outlets. Ensure the total amperage draw does not exceed the circuit breaker's limit (typically 12.0 Amps max with the unit off, 9.5 Amps max with the unit on).
5. Apagar: To turn off the unit, rotate the control switch dial back to the 'OFF' position. Unplug the power cord from the outlet when not in use.

Figure 4: The B-Air VP-50 Air Mover positioned to direct airflow at an angle.

Figure 5: The air mover in use, drying a bathroom floor after a water incident.

Manteniment

• Neteja: Netegeu regularment l'exterior de la unitat amb anuncis.amp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
• Air Inlets/Outlets: Keep the air inlets and outlets free from dust, debris, and obstructions to ensure optimal airflow and prevent overheating.
• Cable d'alimentació: Inspect the power cord for any signs of damage (cuts, fraying) before each use. Do not use the unit if the cord is damaged. Utilize the wrap-around cord design for neat storage.
• Filter (Optional): If an optional filter kit is installed, follow the manufacturer's instructions for regular cleaning or replacement to maintain air quality and unit efficiency.
• Emmagatzematge: Store the air mover in a cool, dry place when not in use. Its stackable design allows for efficient storage of multiple units.

Resolució de problemes

• La unitat no s'encén:
  • Comproveu si el cable d'alimentació està ben connectat a una presa de corrent amb connexió a terra.
  • Verify that the outlet is functioning by plugging in another device.
  • Ensure the control switch is set to one of the speed settings (1, 2, or 3) and not 'OFF'.
  • If daisy-chaining, check the circuit breaker on the unit or the wall outlet.
• Flux d'aire reduït:
  • Inspect air inlets and outlets for any blockages or debris.
  • If an optional filter is installed, check if it is dirty and requires cleaning or replacement.
• Soroll inusual:
  • Turn off and unplug the unit. Inspect the fan blades for any foreign objects.
  • Ensure the unit is placed on a stable, level surface to prevent vibrations.

Especificacions

Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your product or contact B-Air customer service directly. Keep your purchase receipt and serial number handy for any inquiries.