1. Producte acabatview
The Samsung DG44-01007B Range Surface Element Control Switch is a genuine Original Equipment Manufacturer (OEM) part designed to regulate the heat output of your range's surface elements. This component is responsible for turning the surface element on and off and precisely controlling the heat level it produces. It is a functional equivalent and direct replacement for the prior Samsung Part # DG44-01007A.
Image: The Samsung DG44-01007B Range Surface Element Control Switch, showing its terminals and control shaft.
Característiques principals:
- Precise Heat Regulation: Controls the surface element's heat output from low to high.
- Qualitat OEM: Quality tested to Samsung standards for reliability and compatibility.
- Substitució directa: Serves as a perfect fit replacement for DG44-01007A.
- Construcció duradora: Features original part production numbers PER001-03 and PER001-13.
2. Què hi ha a la caixa
El vostre paquet ha de contenir el següent element:
- Single Samsung DG44-01007B Range Surface Element Control Switch, H-Cut
3. Informació de seguretat
Before attempting any installation or repair, please read and understand all safety precautions. Failure to follow these instructions could result in electric shock, fire, or personal injury.
- Desconnecteu l'alimentació: Always disconnect power to the appliance at the circuit breaker or fuse box before beginning any repair or maintenance.
- Personal qualificat: Installation and repairs should only be performed by qualified and experienced technicians.
- Utilitzeu equip de protecció: Utilitzeu l'equip de protecció individual adequat, com ara guants i ulleres de protecció.
- Verifica el número de peça: Ensure the replacement part number matches the original part number for your specific appliance model.
- Comproveu les connexions: Double-check all electrical connections to ensure they are secure and correctly installed.
4. Instal·lació
This section provides general guidance for replacing the surface element control switch. Specific steps may vary depending on your range model. It is highly recommended to refer to your appliance's service manual or consult a service professional.
Passos generals d'instal·lació:
- Desconnexió d'alimentació: Turn off the power to your range at the main circuit breaker.
- Panell de control d'accés: Carefully remove the control knobs and any screws securing the control panel to access the internal components.
- Identify Old Switch: Locate the faulty surface element control switch. Note the wiring configuration before disconnecting. Taking a photo of the existing wiring can be helpful.
- Desconnecteu el cablejat: Carefully disconnect the wires from the old switch.
- Treure l'interruptor antic: Unscrew or unclip the old switch from its mounting bracket.
- Instal·leu un nou interruptor: Position the new DG44-01007B switch and secure it with screws or clips.
- Connecteu el cablejat: Reconnect the wires to the new switch, ensuring each wire is attached to its correct terminal. Refer to your photo or the wiring diagram if necessary.
- Torneu a muntar: Reattach the control panel and control knobs.
- Restaura l'alimentació i prova: Restore power to the range and test the functionality of the new switch.
Vídeos d'instal·lació:
Video: DG44-01007B Range Surface Element Switch Overview
Aquest vídeo ofereix una visió generalview of the DG44-01007B Range Surface Element Switch, highlighting its features and design. It can assist in identifying the correct part and understanding its components before installation.
Video: DG44-01007B Range Surface Element Control Switch (Short Overview)
Una breu presentació de vídeoasing the DG44-01007B control switch, useful for quick visual confirmation of the part.
Video: Range Surface Element Switch Installation Example
This video demonstrates the general process of replacing a range surface element switch. While the specific model shown may vary, the installation principles are similar and can provide helpful visual guidance for replacing the DG44-01007B.
Video: DG44-01006B Range Surface Element Control Switch (Similar Model)
This video shows the installation of a similar control switch, model DG44-01006B. While not identical to the DG44-01007B, the process and components are very similar, offering additional visual aid for understanding the replacement procedure.
5. Instruccions de funcionament
The DG44-01007B control switch functions by rotating the corresponding control knob on your range. Turning the knob clockwise or counter-clockwise adjusts the electrical current supplied to the surface element, thereby controlling its heat output. Ensure the knob is securely attached to the switch shaft for proper operation.
- Posició fora: The element is off when the knob is in the designated 'Off' position.
- Calor baix: Rotate the knob to the 'Low' setting for minimal heat.
- Calor alt: Rotate the knob to the 'High' setting for maximum heat.
- Control variable: Intermediate settings allow for precise temperature adjustments.
6. Manteniment
Regular maintenance helps ensure the longevity and proper function of your surface element control switch.
- Mantenir net: Periodically clean the area around the control knobs and switches to prevent grease and food debris buildup. Ensure power is disconnected before cleaning.
- Inspeccionar connexions: During any routine appliance inspection, check the wiring connections to the switch for looseness or signs of wear.
- Evitar la força: Do not apply excessive force when turning the control knobs, as this can damage the switch mechanism.
7. Solució De Problemes
If you experience issues with your range's surface element, consider the following troubleshooting steps:
| Problema | Causa possible | Solució |
|---|---|---|
| Surface element does not turn on. | Faulty control switch, loose wiring, or element failure. | Check wiring connections. If connections are secure, the switch or element may need replacement. |
| Surface element stuck on high heat regardless of setting. | Faulty control switch. | The control switch is likely defective and requires replacement. |
| Control knob feels loose or does not engage. | Damaged control knob or switch shaft. | Inspect the knob and switch shaft for damage. Replace the damaged component. |
If troubleshooting does not resolve the issue, it is recommended to contact a qualified appliance service professional.
8. Especificacions
Detailed specifications for the Samsung DG44-01007B Range Surface Element Control Switch:
| Especificació | Detall |
|---|---|
| Nom de marca | Samsung |
| Informació del model | DG44-01007B |
| Pes de l'article | 3.52 unces |
| Dimensions del producte | 4.02 x 3.31 x 2.13 polzades |
| Número de model de l'article | DG44-01007B |
| Número de part | DG44-01007B |
| Tipus de connector | Connecteu-vos |
| Replaces Part # | DG44-01007A |
| Original Production Numbers | PER001-03, PER001-13 |
9. Garantia i Suport
For specific warranty information regarding your Samsung DG44-01007B Range Surface Element Control Switch, please refer to the documentation provided with your original appliance or contact Samsung customer support directly. It is always recommended to validate the needed part number for your appliance by referring to your appliance service manual, contacting your appliance manufacturer, or consulting a service professional prior to purchasing i instal·lant qualsevol peça de recanvi.
