Manual d'instruccions del motor del ventilador de l'evaporador de la nevera GE Appliances

Introducció

This manual provides essential information for the installation, operation, and maintenance of your GE Appliances Refrigerator Evaporator Fan Motor (Part Number WR60X26866, also replaces WR60X26033). This genuine replacement part is designed to circulate air efficiently through the fresh food compartment, ensuring proper cooling and food preservation.

Image: GE Appliances Refrigerator Evaporator Fan Motor WR60X26866.

Informació de seguretat

WARNING: Before attempting any installation or maintenance, always prioritize safety.

• Desconnecteu l'alimentació: Always unplug the refrigerator from its power source before beginning any work.
• Emmagatzematge d'aliments: Safely store any food items that could spoil while the refrigerator is powered off. Consider using a cooler with ice.
• Equips de protecció individual: Wear work gloves to protect your hands from sharp edges or components.
• Assistència professional: Si no esteu segurs de cap pas, consulteu un tècnic d'electrodomèstics qualificat.

Image: Important safety precautions before installing the part, including storing food, turning off power, and unplugging the refrigerator.

Producte acabatview

The evaporator fan motor is a critical component in your refrigerator's cooling system. It is responsible for circulating cold air from the evaporator coils throughout the fresh food compartment, maintaining consistent temperatures and preventing frost buildup.

This genuine GE Appliances replacement part (WR60X26866) is designed for direct compatibility and optimal performance, restoring efficient cooling and proper operation to your appliance.

Image: The evaporator fan motor and blade, highlighting an average installation time of 20-30 minutes, no software updates required, and the need for a 1/4" nut driver.

Image: Visual representation of air circulation within a refrigerator, illustrating how the evaporator fan motor distributes cold air for efficient cooling.

Compatibilitat

This evaporator fan motor (Part Number WR60X26866) is specifically designed for GE Appliances refrigerators. It is also a direct replacement for part numbers 239D1412P006, V80E14MS2A3-57A611, AP5985039, and PS11721915.

To ensure compatibility, verify your refrigerator's model number. The serial/model tag can typically be found in one of the following locations:

• Bottom floor of the fresh food compartment (may require removing crisper drawers).
• Behind the crisper drawers in the fresh food compartment.
• Right or left inside wall of the fresh food compartment, near the crisper drawers.
• Right or left inside wall of the fresh food compartment, near the top.
• Top ceiling area of fresh food compartment.
• Inside the freezer section, on the ceiling, near the front.
• Near the temperature controls.
• Bottom front edge.

Image: Common tag locations for side-by-side refrigerators.

Image: Common tag locations for top freezer refrigerators.

Image: Common tag locations for French door refrigerators.

Instruccions d'instal·lació

The replacement process for the evaporator fan motor typically involves accessing the rear of the fresh food compartment. While specific steps may vary by model, the general procedure is as follows:

1. Preparar la nevera:
   • Desendolleu la nevera de la presa de corrent.
   • Remove all food items, shelves, and drawers from the fresh food compartment.
   • If there is ice buildup around the evaporator cover or fan, allow it to defrost completely. This may take several hours. You can expedite this by using a hairdryer on a low setting or a steamer, but be cautious not to damage plastic components.
2. Access the Fan Motor:
   • Locate and remove the screws securing the evaporator cover, typically found at the back of the fresh food compartment.
   • Carefully detach any wiring harnesses connected to the cover or fan assembly.
   • Gently pull the evaporator cover away from the back wall to expose the fan motor and evaporator coils.
3. Replace the Fan Motor:
   • Disconnect the electrical plug from the old fan motor.
   • Remove the old fan motor from its housing. Note how it is secured (e.g., clips, screws, rubber gaskets).
   • Transfer any necessary components, such as rubber sleeves or gaskets, from the old fan to the new one.
   • Install the new evaporator fan motor into the housing, ensuring it is securely seated.
   • Connect the electrical plug to the new fan motor.
4. Torneu a muntar:
   • Carefully re-position the evaporator cover and secure it with its screws.
   • Replace all shelves, drawers, and food items.
   • Plug the refrigerator back into the wall outlet.

The average installation time is approximately 20-30 minutes, not including defrosting time. No software or firmware updates are required for this replacement.

Principis de funcionament

Once installed and powered, the evaporator fan motor operates automatically as part of your refrigerator's cooling cycle. It works in conjunction with the compressor and evaporator coils to maintain the desired temperature within the fresh food compartment. You should hear a consistent, quiet hum from the fan when it is running.

Manteniment

The evaporator fan motor is generally a sealed unit and does not require regular lubrication or cleaning. However, ensuring proper airflow around the evaporator coils is important for its longevity and efficient operation.

• Descongelació: If you notice excessive frost or ice buildup on the evaporator coils or around the fan, manually defrost the refrigerator as described in the installation section. This prevents the fan from becoming obstructed or damaged.
• Neteja: Periodically clean the interior of your refrigerator, especially around the fan and air vents, to prevent dust and debris from accumulating and impeding airflow.

Resolució de problemes

If your refrigerator is not cooling properly, or if you hear unusual noises, the evaporator fan motor may be malfunctioning. Here are some common issues and potential solutions:

Si els passos de resolució de problemes no resolen el problema, és possible que calgui un servei professional.

Especificacions

• Número de peça: WR60X26866 (Replaces WR60X26033, 239D1412P006, V80E14MS2A3-57A611, AP5985039, PS11721915)
• Marca: General Electric (GE Appliances)
• Voltage: 13.6 volts (CC)
• Potència: 0.13 CV
• Dimensions del producte: 7.3 cm d'amplada x 2.7 cm d'alçada
• Material: Plàstic
• Pes de l'article: 7.8 unces
• Dispositiu compatible: Nevera

Garantia i Suport

This genuine GE Appliances replacement part is backed by a history of quality and reliability. GE Appliances parts are engineered to precise specifications, subjected to rigorous testing, and certified by third-party regulators.

Image: GE Appliances emphasizes quality parts for long-lasting, reliable performance.

For specific warranty details or further support, please refer to the documentation included with your refrigerator or visit the official GE Appliances weblloc: www.geappliances.com.