Manual d'usuari de la memòria USB TFA 30.3175
Model: 30.3175
Introducció
This manual provides detailed instructions for the setup, operation, and maintenance of your TFA USB - Stick 30.3175. Please read this manual carefully before using the device to ensure proper functionality and to avoid damage.
Producte acabatview
The TFA USB - Stick 30.3175 is a USB transceiver designed for use with specific TFA devices, enabling data transmission via radio frequency.
Figure 1: TFA USB Stick 30.3175. This image shows the compact, rectangular USB stick, light gray in color, with a standard USB-A connector at one end.
Figure 2: TFA Brand Logo. The logo features the letters "TFA" in bold blue uppercase, with a yellow curved shape behind the "A" and a registered trademark symbol.
Característiques principals:
- USB Transceiver functionality.
- Radio transmission at 868 MHz.
- Disseny compacte i lleuger.
Configuració
- Requisits del sistema: Ensure your computer meets the necessary operating system requirements for the accompanying software (if applicable).
- Instal·lació de programari: If your TFA device requires specific software for data logging or analysis, install it according to the software's instructions. This USB stick acts as a receiver for data from compatible TFA sensors.
- Connect the USB Stick: Insert the TFA USB - Stick 30.3175 into an available USB port on your computer.
- Instal·lació del controlador: Your operating system may automatically install necessary drivers. If not, refer to the software's documentation for manual driver installation.
En funcionament
The TFA USB - Stick 30.3175 functions as a receiver for data transmitted by compatible TFA devices. Its operation is primarily managed through the software associated with your TFA measurement device.
Compatibilitat:
This USB stick is suitable for use with the following TFA models:
- 35.1099.IT
- THERMOLOGGER.IT
- 35.1112.IT
For detailed instructions on how to receive and log data, please consult the user manual of your specific TFA measurement device (e.g., 35.1099.IT, THERMOLOGGER.IT, 35.1112.IT).
Manteniment
The TFA USB - Stick 30.3175 requires minimal maintenance.
- Neteja: Use a soft, dry cloth to clean the exterior of the USB stick. Do not use liquid cleaners or solvents.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes quan no l'utilitzeu.
- Manipulació: Eviteu deixar caure el dispositiu o exposar-lo a impactes forts.
Resolució de problemes
If you encounter issues with your TFA USB - Stick 30.3175, consider the following:
- Dispositiu no reconegut:
- Try plugging the USB stick into a different USB port on your computer.
- Reinicieu l'ordinador.
- Ensure all necessary drivers are installed. Check your computer's Device Manager for any unrecognized devices.
- No Data Reception:
- Verify that the compatible TFA measurement device is powered on and within range of the USB stick.
- Check the settings in your TFA software to ensure it is configured to receive data from the correct sensor.
- Ensure there are no significant obstructions (e.g., thick walls, large metal objects) between the sensor and the USB stick that could interfere with the 868 MHz radio signal.
For persistent issues, refer to the support section of the TFA weblloc o contacteu amb el servei d'atenció al client.
Especificacions
| Característica | Detall |
|---|---|
| Model | 30.3175 |
| Tipus de producte | Transceptor USB |
| Dimensions (L x A x A) | 9 x 5 x 1 cm (aprox.) |
| Pes | 10 g (aprox.) |
| Freqüència de transmissió | 868 MHz |
| Models compatibles | 35.1099.IT, THERMOLOGGER.IT, 35.1112.IT |
Garantia i Suport
For warranty information and technical support, please refer to the official TFA weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra com a comprovant de compra.
TFA Dostmann GmbH & Co. KG
www.tfa-dostmann.de
