Introducció
This manual provides essential information for the safe and effective operation, maintenance, and care of your Makita DTD 153 ZJ 18V Battery-Powered Brushless Impact Wrench. Please read and understand all instructions before use to ensure optimal performance and user safety. The tool is designed for driving screws into wood, metal, and plastic materials.
Característiques clau
- Motor sense escombretes: Proporciona més potència, eficiència i una vida útil més llarga de l'eina.
- Disseny compacte: Short design of only 138 mm for improved maneuverability in tight spaces.
- Mànec ergonòmic: Perfectly shaped for comfortable grip and reduced user fatigue.
- Il·luminació LED integrada: Illuminates the work area for enhanced visibility in dimly lit conditions.
- Construcció robusta: Features protective caps on the housing and rubber seals for dust and splash water resistance, ensuring durability.
- Velocitat variable: Permet un control precís sobre les aplicacions de fixació.
Figure 1: The Makita DTD 153 ZJ 18V Brushless Impact Wrench, shown with a compatible 18V battery (not included with solo unit).
Configuració
- Instal·lació de la bateria: Ensure the battery is fully charged. Align the battery with the tool's battery port and slide it in until it clicks securely into place. To remove, press the release button on the battery and slide it out.
- Instal·lació de bits: Pull the bit holder collar forward. Insert the desired 1/4" hex shank bit into the holder. Release the collar to lock the bit in place. Gently pull on the bit to ensure it is securely fastened.
- Fixació de la corretja: If desired, attach the wrist strap to the designated loop on the tool's base for added security during operation.
Video 1: A demonstration of handling and basic setup for a cordless impact wrench, including battery insertion and bit attachment.
Instruccions de funcionament
- Encès/apagat: The tool is activated by pressing the trigger switch. The speed increases with increased pressure on the trigger.
- Sens de gir: Use the forward/reverse switch located above the trigger to select the desired rotation direction for tightening or loosening screws.
- Llum de treball LED: The integrated LED light automatically illuminates when the trigger is pressed, providing visibility to the work area.
- Cargols de fixació: Position the bit on the screw head. Apply firm, steady pressure and press the trigger. The impact mechanism will engage as resistance increases, driving the screw efficiently.
Figura 2: Un primer pla view of the integrated LED work light on the Makita DTD 153 ZJ, which illuminates the fastening area.
Manteniment
- Neteja: Netegeu regularment l'exterior de l'eina amb un drap suau iamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Obertures de ventilació: Mantingueu les obertures de ventilació netes de pols i deixalles per evitar el sobreescalfament.
- Cura de la bateria: Store batteries in a cool, dry place. Do not expose them to extreme temperatures or moisture. Charge batteries fully before storage and periodically during long storage periods.
- Inspecció: Periodically inspect the tool for any signs of damage, loose screws, or worn parts. Contact authorized service personnel for repairs.
Resolució de problemes
- L'eina no s'inicia: Ensure the battery is fully charged and properly inserted. Check the forward/reverse switch is not in the neutral (locked) position.
- Potència reduïda: A low battery charge can cause reduced power. Recharge the battery. Ensure the correct bit is used for the application.
- Sobreescalfament: If the tool overheats, stop use immediately and allow it to cool down. Check ventilation openings for blockages. Avoid continuous heavy-duty use without breaks.
- Bit no aguanta: Ensure the bit is correctly inserted into the 1/4" hex chuck and the collar is fully released to lock it.
Especificacions
| Característica | Especificació |
|---|---|
| Número de model | DTD 153 ZJ |
| Marca | Makita |
| Font d'alimentació | Funciona amb bateria (18 V) |
| Parell màxim | 165 Nm (Hard) / 170 Nm |
| Portaeines | Hexagonal de 1/4" |
| Velocitat de ralentí | 0-2900 min-1 |
| Idle Impact Rate | 0-3500 min-1 |
| Tightening Capacities (Machine Screws) | 4-8 mm |
| Tightening Capacities (Standard Screws) | 5-16 mm |
| Tightening Capacities (HV Screws) | 5-12 mm |
| Dimensions (L x A x A) | 137 x 79 x 238 mm |
| Pes (sense bateria) | 0.97 kg |
| Nivell de pressió sonora | 93 dB(A) |
| Nivell de potència sonora | 104 dB(A) |
| Vibration Emission (Impact Screws) | 10.5 m/s² |
| Material | Plàstic |
Garantia i Suport
Makita power tools are engineered for durability and performance. For specific warranty information, please refer to the warranty card included with your product or visit the official Makita website. For technical support, service, or to locate an authorized service center, please contact Makita customer service or consult the contact information provided in your product packaging.
Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
