Pilo Hand Launch Glider 2in1 Instruction Manual

1. Introducció

The Jamara Pilo Hand Launch Glider 2in1 is a lightweight and durable model aircraft designed for outdoor recreational flight. Constructed from EPP (Expanded Polypropylene) foam, it offers high resistance to impacts, making it suitable for repeated use. This glider is engineered to perform two distinct flight modes: stable gliding and dynamic looping, providing versatile flight experiences.

This manual provides essential information for the assembly, operation, and maintenance of your Pilo Hand Launch Glider to ensure safe and enjoyable use.

2. Informació de seguretat

• Edat recomanada: This product is recommended for users aged 5 years and up. Adult supervision is advised for younger children.
• Àrea de vol: Always operate the glider in open, clear areas free from obstacles such as trees, power lines, buildings, and people. Avoid flying near roads or in crowded spaces.
• Condicions meteorològiques: Do not fly in strong winds, rain, or thunderstorms. Optimal flight conditions are calm or light breeze.
• Comprovació prèvia al vol: Before each flight, inspect the glider for any damage, cracks, or loose parts. Ensure all components are securely attached.
• Tècnica de llançament: When launching, ensure no one is in the flight path to prevent accidental injury.
• Seguretat del material: The glider is made of EPP foam. While durable, avoid intentional bending or breaking of parts beyond their intended use.

3. Contingut del paquet

Upon opening the package, verify that all components are present and undamaged. The Pilo Hand Launch Glider 2in1 typically includes the following:

• 1x Glider Fuselage (main body)
• 1x Main Wing
• 1x Horizontal Stabilizer (tail fin)
• 1x Manual d'instruccions (aquest document)

Image: Pilo Hand Launch Glider 2in1 in its retail packaging.

Image: All components of the Pilo Hand Launch Glider laid out before assembly.

4. Muntatge

The Pilo Hand Launch Glider is designed for quick and easy assembly. No tools or adhesives are required.

1. Attach the Main Wing: Carefully slide the main wing into the designated slot on the top of the glider fuselage. Ensure it is centered and fully inserted until it sits flush.
2. Attach the Horizontal Stabilizer: Insert the horizontal stabilizer (the small tail fin) into the slot at the rear of the fuselage. Ensure it is oriented correctly, with the flat surface parallel to the ground.

Once assembled, the glider should appear as shown in the image below.

Image: The Pilo Hand Launch Glider fully assembled and ready for flight.

5. Instruccions de funcionament

The Pilo Glider offers two primary flight modes: Gliding and Looping. Adjustments to the main wing allow you to switch between these modes.

5.1 General Launch Technique

Hold the glider firmly by the fuselage, just behind the main wing, with the nose pointing slightly upwards. With a smooth, forward motion, launch the glider into the air. The force and angle of the throw will influence the flight path.

Image: Proper hand placement for launching the Pilo Glider.

5.2 Gliding Flight

For a stable, long-distance glide, ensure the main wing is flat and straight. Launch the glider with a moderate, level throw. The glider will maintain a relatively straight path, gradually descending as it moves forward.

Image: Diagram illustrating the typical flight path for gliding mode.

5.3 Looping Flight

To make the glider perform loops, gently bend the tips of the main wing upwards. This adjustment changes the aerodynamics, causing the glider to pitch up and perform a looping maneuver after launch. Experiment with the degree of bend to achieve different looping patterns.

Image: Demonstrating how to gently bend the wingtips upwards for looping flight.

Image: Diagram illustrating the typical flight path for looping mode.

6. Manteniment

The Pilo Hand Launch Glider requires minimal maintenance due to its durable EPP foam construction.

• Neteja: If the glider becomes dirty, wipe it gently with a damp tela. Eviteu utilitzar productes químics aggressivs o netejadors abrasius.
• Emmagatzematge: Store the glider in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
• Inspecció: Periodically inspect the glider for any signs of wear, tear, or damage. While EPP is resilient, extreme impacts can cause damage. If significant damage occurs, consider replacing the glider.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information or technical support regarding your Jamara Pilo Hand Launch Glider 2in1, please contact Jamara customer service directly. Refer to the product packaging or the official Jamara weblloc web per obtenir les dades de contacte i els termes de garantia més actualitzats.

Fabricant: Jamara