1. Introducció
This manual provides detailed instructions for the installation, maintenance, and troubleshooting of your Duravit 0006381 Toilet Seat Hardware Kit. This kit is designed as an original repair part to ensure proper function and longevity of your Duravit toilet seat. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe operation.
2. Informació de seguretat
- Sempre utilitzeu l'equip de protecció individual adequat, com ara guants, durant la instal·lació.
- Ensure all components are securely fastened to prevent injury or damage.
- Do not overtighten screws, as this may damage the toilet bowl or seat.
- Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
- Si no esteu segurs de cap pas, consulteu un lampista qualificat.
3. Contingut del paquet
The Duravit 0006381 Toilet Seat Hardware Kit includes the following components:
- Two (2) toilet seat hinge posts with integrated bolts.
- Two (2) circular base plates.
- Two (2) rubber washers/gaskets.
Image 1: Components of the Duravit 0006381 Toilet Seat Hardware Kit. The image displays two sets of hardware, each consisting of a hinge post with an integrated bolt, a circular base plate, and a clear rubber washer.
4. Instruccions d'instal·lació
Follow these steps to properly install the Duravit 0006381 Toilet Seat Hardware Kit:
- Preparació: Ensure the toilet bowl surface where the seat attaches is clean and dry. Remove any old hardware or residue.
- Position Washers: Place one rubber washer over each bolt hole on the toilet bowl. These washers protect the porcelain and provide a secure fit.
- Insert Hinge Posts: Insert the integrated bolts of the hinge posts through the rubber washers and into the bolt holes on the toilet bowl.
- Attach Base Plates: From underneath the toilet bowl, slide a circular base plate onto each bolt. Ensure the base plate is oriented correctly to allow for tightening.
- Maquinari segur: Hand-tighten the nuts onto the bolts from underneath the toilet bowl. Do not overtighten initially.
- Attach Toilet Seat: Align the toilet seat hinges with the hinge posts. Gently push the seat down onto the posts until it clicks into place or is securely seated.
- Ajustar i estrènyer: Adjust the position of the toilet seat to ensure it is centered on the bowl. Once aligned, fully tighten the nuts from underneath the toilet bowl using an appropriate wrench. Be careful not to overtighten.
- Estabilitat de prova: Gently test the stability of the toilet seat to ensure it does not wobble.
5. Manteniment
Proper maintenance ensures the longevity and hygiene of your toilet seat hardware.
- Neteja: Clean the hardware regularly with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads, as these can damage the finish.
- Inspecció: Periodically check the tightness of the mounting bolts. If the seat feels loose, gently retighten the nuts from underneath the toilet bowl.
- Eviteu la força excessiva: Do not apply excessive force to the toilet seat, as this can stress the hardware and lead to premature wear or breakage.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Toilet seat is loose or wobbles. | Els cargols de muntatge no estan prou apretats. | Gently retighten the nuts underneath the toilet bowl. Do not overtighten. |
| Difficulty attaching the toilet seat to the hinge posts. | Hinge posts are not correctly aligned or seat mechanism is obstructed. | Ensure hinge posts are vertical and parallel. Check for any debris in the seat's hinge receptacles. |
| Hardware appears corroded or damaged. | Exposició a productes químics agressius o humitat prolongada. | Clean regularly with mild cleaners. If severely damaged, replacement may be necessary. |
7. Especificacions
- Número de model: 0006381
- Marca: Duravit
- Material: Acer
- Color: White (referring to the toilet seat, not the hardware itself which is metallic)
- Dimensions del producte: Approximately 1 x 1 x 1 inches (individual component size)
- Pes de l'article: Approximately 4.2 ounces (total kit)
- Ús previst: Replacement hardware for Duravit toilet seats.
8. Garantia i Suport
For warranty information or technical support regarding your Duravit 0006381 Toilet Seat Hardware Kit, please contact Duravit customer service directly. Refer to the official Duravit weblloc web o l'embalatge del producte per obtenir les dades de contacte i els termes de garantia més actualitzats.
Duravit Official Weblloc: www.duravit.com
