1. Informació important de seguretat
ADVERTIMENT: Keep out of reach of children. Avoid contact with skin and eyes. Always wear appropriate personal protective equipment, including eye protection, gloves, and a respirator, when operating this equipment. Ensure adequate ventilation in the work area. Refer to the material manufacturer's safety data sheet (SDS) for specific handling instructions and precautions.
2. Producte acabatview
The Graco Edge II Gun is an innovative HVLP (High Volume Low Pressure) spray gun designed to maximize spraying performance and achieve a high-quality finish for fine finish applications. It features cutting-edge technology for intuitive controls and optimized air pressure and airflow.
Figure 2.1: The Graco Edge II HVLP Spray Gun, featuring a chrome body, black ergonomic handle, and a clear 32 oz FlexLiner cup attached at the bottom. The gun has blue accents and visible controls for fluid and air adjustments.
Característiques principals:
- Control de flux integrat: Combines material and air flow into one simple control, optimized for fine finish applications. Features quick adjustment with 360° rotation and an indicator for repeatable spray settings.
- Adjustable Air Cap: Offers 3-position rotation to change the spray pattern. Conveniently located at the front of the gun, it allows more air pressure into the material cup to spray heavier material.
- EasyGlide 2-Finger Trigger and Ergonomic Handle: The trigger has up to 75% lighter pull than comparable models, and the 2-finger design provides more control while spraying. The form-fitted handle stays cool during extended use.
- Quick Release Needle Design: Allows for easy needle changes from the front of the gun with a simple click. No tools are needed for changing or cleaning.
- Components inclosos: Comes with a 1 qt FlexLiner Cup and a #3 Quick Release Fluid Set.
- Materials compatibles: Suitable for use with Varnish, Enamel, Latex, and Stains.
- Compatibilitat: Designed for use with FinishPro HVLP Sprayers.
3. Configuració
Before initial use, ensure all components are present and securely attached.
- Attach FlexLiner Cup: Securely attach the 1 qt FlexLiner Cup to the bottom of the spray gun. Ensure it is properly seated to prevent leaks.
- Install Fluid Set: Insert the #3 Quick Release Fluid Set into the gun. This set is designed for easy installation and removal.
- Connect to HVLP Sprayer: Connect the Graco Edge II Gun to a compatible Graco FinishPro HVLP Sprayer. Ensure all connections are tight and leak-free.
- Preparació del material: Prepare your chosen material (varnish, enamel, latex, or stain) according to the manufacturer's instructions. Pour the prepared material into the FlexLiner Cup.
4. Instruccions de funcionament
Proper operation ensures optimal finish quality and extends the life of your spray gun.
- Adjust Fluid Levels: Use the integrated flow control dial to adjust the fluid levels. This dial combines material and air flow for precise control. Rotate the dial to increase or decrease material flow as needed for your application.
- Set Spray Pattern: Rotate the adjustable air cap, located at the front of the gun, to select one of the three available spray patterns (horizontal, vertical, or round). This allows you to adapt the spray to different surfaces and project requirements.
- Control Air Pressure: The adjustable air cap also allows for more air pressure into the material cup, which is beneficial when spraying heavier materials. Adjust as necessary to achieve desired atomization.
- Initiate Spraying: Depress the EasyGlide 2-Finger Trigger to begin spraying. The light pull and ergonomic design reduce fatigue during prolonged use. Maintain a consistent distance and speed for an even finish.
5. Manteniment
Regular cleaning and maintenance are crucial for the longevity and performance of your Graco Edge II Gun.
- Neteja després de cada ús: Thoroughly clean the spray gun immediately after each use. Follow the material manufacturer's recommendations for cleaning solvents.
- Quick Release Needle Change: To change or clean the needle, twist off the front air cap and nozzle. Slide the trigger lever to release the needle, then pull the needle out. This process is tool-free and takes approximately one minute.
- Clean FlexLiner Cup: The FlexLiner cup is designed for easy cleaning and reuse. Empty any remaining material and clean the cup thoroughly.
- Inspeccionar components: Periodically inspect the fluid set, air cap, and trigger mechanism for wear or damage. Replace worn parts as needed to maintain optimal performance.
6. Solució De Problemes
This section provides general guidance for common issues. For detailed troubleshooting, refer to the comprehensive Graco HVLP Sprayer manual or contact Graco customer support.
| Problema | Causa possible | Solució |
|---|---|---|
| Patró de polvorització pobre | Incorrect air cap setting, clogged nozzle, improper material viscosity. | Adjust air cap, clean nozzle, thin material as per manufacturer's guidelines. |
| Material Leaking | Loose connections, worn seals, damaged needle. | Tighten connections, replace seals, inspect and replace needle if damaged. |
| No Material Flow | Clogged fluid set, empty FlexLiner cup, incorrect fluid level setting. | Clean fluid set, refill cup, adjust fluid control dial. |
7. Especificacions
| Atribut | Detall |
|---|---|
| Marca | Graco |
| Nom del model | EDGE II |
| Número de model de l'article | 17P481 |
| Tipus de pistola | Pistola HVLP |
| Font d'alimentació | Manual (requires external HVLP sprayer) |
| Material compatible | Vernís, esmalt, làtex, taques |
| Components inclosos | 1 qt FlexLiner Cup, #3 Quick Release Fluid Set |
| Volum del dipòsit | 0.25 galons (32 unces) |
| Pes de l'article | 1.32 quilograms (2.91 lliures) |
| Dimensions del paquet | 12.6 x 9.02 x 5.63 polzades |
| UPC | 755652419235 |
8. Garantia i Suport
For specific warranty information regarding your Graco Edge II Gun, please refer to the warranty card included with your product or visit the official Graco weblloc.
For technical support, replacement parts, or service inquiries, please contact Graco Customer Service:
- Weblloc: www.graco.com
- Telèfon: Refer to your regional Graco contact information on their weblloc.
