1. Producte acabatview
The darkFlash DR12 Pro Addressable RGB Case Fans are designed to provide efficient cooling and vibrant lighting for your computer system. This kit includes 120mm fans with addressable RGB LEDs, a control hub, and a remote controller, offering extensive customization options for lighting effects and fan speed. The fans are compatible with ASUS Aura Sync and other motherboard RGB synchronization technologies via a 5V ARGB header.
Image 1.1: The darkFlash DR12 Pro fan kit, including three fans, the control hub, and the RF wireless remote controller.
2. Contingut del paquet
Si us plau, comproveu el contingut del paquet en desembalar-lo per assegurar-vos que hi hagi tots els components:
- 3 x darkFlash DR12 Pro 120mm ARGB Case Fans
- 1 x Control Hub
- 1 x RF Wireless Remote Controller
- 1 x 5V RGB Cable (for motherboard synchronization)
- 1 x LED Cable (specifically for Gigabyte VDG ports)
- Cargols de muntatge
3. Característiques del producte
- Il·luminació RGB direccionable: Each fan features vibrant, customizable ARGB lighting with multiple effects.
- Sincronització de la placa base: Compatible with ASUS Aura Sync and other 5V ARGB headers for synchronized lighting across your system.
- Funcionament silenciós: Engineered for low noise levels, approximately 16 dBA.
- Alt rendiment: Provides effective airflow for optimal system cooling.
- Control de velocitat: Adjust fan speed via the remote controller or motherboard software.
- Dual-Sided Lighting: LEDs are present on both sides of the fan, ensuring aesthetic appeal regardless of mounting orientation.
- Coixinets antivibracions: Rubber pads on fan corners reduce operational noise and vibration.
- Control centralitzat: The included control hub supports up to 8 fans and 2 LED strips.
Imatge 3.1: Detall view of the fans and control hub, highlighting the RGB rings.
4. Configuració i instal·lació
Follow these steps to properly install your darkFlash DR12 Pro fans:
4.1 Instal·lació del ventilador
- Identify desired mounting locations within your PC case (e.g., front, top, rear).
- Secure each fan to the case using the provided mounting screws. Ensure the airflow direction is as desired (typically intake from front/bottom, exhaust from rear/top).
Image 4.1: A single darkFlash DR12 Pro fan, showing its design and mounting points.
4.2 Control Hub Connection
- Connect each fan's proprietary cable to the numbered FAN ports (1-8) on the control hub.
- Connect the control hub to your power supply unit (PSU) using the 4-pin power connector.
- Opcional: For motherboard RGB synchronization, connect the 5V RGB cable from the control hub to your motherboard's 5V ADD_HEADER or Digital LED Pin Header (VDG).
- Important Note for Gigabyte Motherboards: If you have a Gigabyte motherboard, use the dedicated LED cable to connect the control hub to the VDG port. Connecting the LED cable to other ports may short circuit your motherboard.
- The control hub can be mounted inside your case using the adhesive loop fasteners on its back.
Image 4.2: Detailed connection diagram showing fans, control hub, power supply, and motherboard RGB headers.
Image 4.3: Close-up of the control hub's ports and the included 5V RGB and LED cables.
Image 4.4: Dimensions of the DR12 Pro fan and control hub, along with the adhesive backing for the hub.
5. Instruccions de funcionament
The darkFlash DR12 Pro fans can be controlled using the included RF wireless remote controller or via motherboard software if connected to a compatible ARGB header.
5.1 Funcions del comandament a distància
The remote allows for direct control over lighting modes, LED speed, and fan speed.
Image 5.1: Diagram of the RF Wireless Remote Controller with button descriptions.
| Botó | Funció |
|---|---|
| Botó d'engegada | Turns lighting On/Off. |
| MODE + / MODE - | Alterna ciclísticament entre diversos modes d'il·luminació. |
| LED SPEED + / LED SPEED - | Adjusts the speed of the lighting effects. |
| FAN SPEED + / FAN SPEED - | Adjusts the fan rotation speed. |
| M/B SYNC | Switches between remote control and motherboard synchronization (if connected). |
| R, G, B Buttons | Selects static Red, Green, or Blue color. |
| Mode arc de Sant Martí | Activates rainbow lighting effect. |
| Modalitat de respiració | Activates breathing lighting effect. |
| Start Night Mode | Activates a low-brightness mode suitable for night. |
| Lighting Mode (Lightning Bolt icon) | Activates a specific dynamic lighting mode. |
Imatge 5.2: Ex.amples of different lighting modes achievable with the DR12 Pro fans.
5.2 Motherboard Synchronization
If the 5V RGB cable is connected to a compatible motherboard header, you can control the fan lighting through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion). Press the "M/B SYNC" button on the remote to switch control to the motherboard software. Ensure your motherboard's software is up-to-date for best compatibility.
6. Manteniment
- Neteja: Periodically clean the fan blades and frame to prevent dust buildup, which can reduce cooling efficiency and increase noise. Use compressed air or a soft, dry cloth. Ensure the PC is powered off and unplugged before cleaning.
- Gestió de cables: Assegureu-vos que tots els cables estiguin ben encaminats i fixats per evitar interferències amb les aspes del ventilador o altres components.
- Inspecció: Regularly check fan mounting screws for tightness and ensure no cables are obstructing fan rotation.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Fans not spinning. | No power to control hub; loose connection; faulty fan. |
|
| La il·luminació RGB no funciona. | Loose ARGB cable; remote not paired; motherboard sync active; faulty LED. |
|
| Fans are noisy. | Dust buildup; loose mounting; high fan speed; cable obstruction. |
|
| Remote controller not responding. | Bateria baixa/descarregada; obstrucció; fora de l'abast. |
|
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | DR12 Pro (8541605736) |
| Dimensions del ventilador | 125 mm x 125 mm x 125 mm (aprox. 4.92 x 4.92 x 4.92 polzades) |
| Control Hub Dimensions | 94 mm x 47 mm x 15 mm (aprox. 3.7 x 1.85 x 0.59 polzades) |
| Velocitat del ventilador | Fins a 1300 RPM |
| Capacitat de cabal d'aire | 20.34 CFM (Peus cúbics per minut) |
| Nivell de soroll | 16 dBA |
| Tipus de connector d'alimentació | 4-Pin (for control hub) |
| Voltage | 12 volts (CC) |
| Wattage | 1.92 watts |
| Mètode de refrigeració | Aire |
| Material | Rubber (anti-vibration pads) |
| Compatibilitat | Motherboards with 5V Addressable RGB (3-pin) header (e.g., ASUS Aura Sync) |
9. Garantia i Suport
For warranty information and technical support, please refer to the darkFlash official weblloc web o poseu-vos en contacte amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Weblloc: www.darkflash.com
