Tectite FSBBOXWMWH Washing Machine Outlet Box User Manual

1. Introducció

Thank you for choosing the Tectite FSBBOXWMWH Washing Machine Outlet Box. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new outlet box. Please read these instructions carefully before beginning installation and retain them for future reference.

2. Característiques del producte

• Integrated Valves: Includes 1/2-inch push-to-connect washing machine valves.
• Compatibilitat de canonades: Designed for use with copper, CPVC, or PEX lines.
• Apagador de cops d'ariete: Integrated to protect plumbing systems and fixtures.
• Connexió fàcil: Push-to-connect design for simple and fast installation without tools, solder, or glue.
• Muntatge versàtil: Box design allows for right or left stud mounting.
• Adjustable Faceplate: Snap-in-place faceplate accommodates up to 3/4-inch drywall.
• Construcció duradora: Valves constructed of lead-free dezincification resistant (DZR) brass for superior reliability and strength.
• Connexions de presa: Features 3/4-inch male hose thread outlet connections.

3. Informació de seguretat

Always observe local plumbing codes and regulations. If you are unsure about any part of the installation process, consult a qualified plumber. Ensure water supply is turned off before beginning any plumbing work. Wear appropriate personal protective equipment (PPE) such as safety glasses and gloves.

4. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Tectite FSBBOXWMWH Washing Machine Outlet Box with integrated valves
• Snap-on Faceplate
• 1/2 inch Plastic Demount Clip (often included for convenience)

Figura 1: Davant view of the Tectite FSBBOXWMWH Washing Machine Outlet Box, showing the white box housing, integrated hot (red handle) and cold (blue handle) water valves, and the 3/4-inch male hose thread outlet connections at the bottom.

5. Configuració i instal·lació

Follow these steps for proper installation of the Tectite FSBBOXWMWH Washing Machine Outlet Box.

5.1. Preparació

1. Turn off the main water supply to the area where the outlet box will be installed.
2. Drain any remaining water from the pipes.
3. Determine the desired mounting location. The box can be mounted to the left or right of a stud.
4. Cut an appropriate opening in the wall for the outlet box. Ensure sufficient space for pipe connections.

5.2. Muntatge de la caixa

1. Position the outlet box in the wall opening. The box features mounting flanges for securing to a stud.
2. Secure the box to the stud using appropriate fasteners (not included). Ensure the box is level and flush with the wall surface.

Figura 2: En angle view of the outlet box, illustrating its depth and the top drain opening, which connects to the washing machine's drain hose.

5.3. Making Water Connections (Push-to-Connect)

The Tectite outlet box utilizes push-to-connect fittings for quick and secure connections to copper, CPVC, PEX, or PE-RT pipes.

1. Ensure the pipe ends are clean, free of burrs, and cut squarely. Do not sand the pipe ends as this can damage the O-ring seal.
2. Mark the insertion depth on the pipe. Refer to the manufacturer's guidelines for specific depth requirements for 1/2-inch push-to-connect fittings.
3. Firmly push the pipe into the fitting until it reaches the marked depth. You should feel a slight resistance as the pipe passes through the O-ring and then a secure stop as the stainless steel teeth grip the pipe.
4. Gently pull on the pipe to ensure a secure connection.
5. Connect the hot water supply line to the valve with the red handle and the cold water supply line to the valve with the blue handle.

Figura 3: A baix view of the outlet box, highlighting the push-to-connect inlets for hot and cold water supply lines. These fittings are compatible with copper, CPVC, PEX, and PE-RT pipes.

5.4. Connexió de desguàs

1. Connect the washing machine's drain hose to the large opening at the top of the outlet box. Ensure a secure fit to prevent leaks.

5.5. Finalització de la Instal·lació

1. Once all plumbing connections are made and secured, turn the main water supply back on.
2. Inspect all connections for leaks. Tighten any leaking connections if necessary.
3. Install the snap-on faceplate. It is designed to accommodate up to 3/4-inch drywall thickness.

6. Instruccions de funcionament

The Tectite FSBBOXWMWH Outlet Box features quarter-turn ball valves for controlling water flow to your washing machine.

• To Open Valves: Turn the valve handles 90 degrees so they are parallel with the water pipes.
• To Close Valves: Turn the valve handles 90 degrees so they are perpendicular to the water pipes.

It is recommended to close the washing machine valves when the appliance is not in use for extended periods to prevent potential leaks and reduce wear on the washing machine hoses.

7. Manteniment

The Tectite FSBBOXWMWH Outlet Box requires minimal maintenance.

• Periodically inspect the connections for any signs of leaks or corrosion.
• Ensure the valve handles operate smoothly. If they become stiff, a small amount of silicone-based lubricant can be applied to the stem (with water supply off).
• The integrated water hammer arrestor is maintenance-free.

8. Solució De Problemes

9. Especificacions

10. Informació de la garantia

Tectite products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty documentation provided with your purchase or visit the official Tectite weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.

11. Suport

If you have any questions or require assistance with your Tectite FSBBOXWMWH Washing Machine Outlet Box, please contact Tectite customer support. Contact information can typically be found on the product packaging or the manufacturer's official weblloc.