Introducció
The Orbit Pro Series 8-Pattern Thumb Control Hose Nozzle Sprayer is designed to provide versatile and efficient watering for various outdoor tasks. Its innovative thumb-control feature allows for effortless water flow adjustment, making it suitable for residential homeowners, professional contractors, and growers. This manual provides essential information for the proper setup, operation, and maintenance of your new hose nozzle.
Producte acabatview
Característiques clau
- ENHANCE YOUR GARDENING EXPERIENCE - Our premium garden hose nozzle sprayer offers versatile spraying options for all your watering needs.
- ADJUSTABLE SPRAY PATTERNS - Easily switch between 7 different water patterns with our innovative rotating nozzle dial feature.
- DURABLE AND LONG-LASTING - Built with high-quality materials, our nozzle for hose ensures long-lasting performance in any watering system.
- FÀCIL D'ÚS I NETEJA - The user-friendly design of our water hose sprayer makes it simple to operate and easy to clean after use.
- VERSATILE SPRAY PATTERNS - From gentle showers to powerful jets, our spray hose nozzle provides a wide range of spray patterns for various tasks.
Components del producte
Configuració
To set up your Orbit Pro Series Hose Nozzle, ensure your garden hose is equipped with a standard hose fitting. If your hose has a quick-connect fitting, ensure it is compatible with the nozzle's female hose thread inlet.
- Inspect Nozzle: Before first use, check the nozzle for any visible damage or debris in the inlet.
- Connecteu-vos a la mànega: Screw the nozzle onto the end of your garden hose. Hand-tighten until secure. Avoid over-tightening, which can damage the threads or internal washer.
- Comproveu si hi ha fuites: Turn on the water supply slowly. Check the connection point for any leaks. If a leak occurs, tighten slightly or ensure the rubber washer inside the nozzle's inlet is properly seated.
Instruccions de funcionament
Thumb Control Operation
The Orbit Pro Series nozzle features an intuitive thumb control for water flow. Simply push the lever forward with your thumb to increase water flow, and pull it back to decrease or shut off the flow. This allows for precise control without needing to constantly return to the spigot.
Ajust de patrons de polvorització
To change the spray pattern, rotate the oversized dial at the front of the nozzle. The dial is designed for easy grip, even with wet hands or gloves. Align the desired pattern (Jet, Shower, Full, H Sweep, V Sweep, Cone, Center, Mist) with the indicator mark on the nozzle body.
Manteniment
Proper maintenance will extend the life of your Orbit hose nozzle.
- Neteja: Periodically clean the nozzle head to remove mineral deposits or debris that may affect spray patterns. Use a small brush or needle to clear any clogged holes.
- Hivernització: Before freezing temperatures, disconnect the nozzle from the hose and drain any remaining water. Store the nozzle indoors in a dry, protected area to prevent damage from freezing.
- Substitució de la rentadora: If leaks occur at the hose connection, check the rubber washer inside the nozzle. Replace it if it appears worn or cracked.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Fuita d'aigua per la connexió de la mànega | Loose connection, worn/missing washer | Tighten connection; replace rubber washer. |
| Low water pressure/weak spray | Clogged nozzle head, low water supply pressure | Clean nozzle holes; check water supply. |
| Difficulty changing spray patterns | Debris in dial mechanism, stiff mechanism | Rinse dial with water; apply silicone lubricant if needed. |
| Thumb control is stiff or stuck | Mineral buildup, internal wear | Flush with water; if persistent, contact support. |
Especificacions
- Material: Zinc
- Marca: Òrbita
- Dimensions de l'article (L x A x A): 2.6 x 5.75 x 5.25 polzades
- Acabat exterior: Metall
- Tipus de connexió d'entrada: Female Hose Thread
- Tipus de connexió de presa: G Connector
- Tipus de vàlvula: Vàlvula de bola
- Pes de l'article: 13.7 unces
- Número de model: 26812
- Mida: 8-Patró
- Color: Negre
- Estil: Control del polze
- Patró: 8-Pattern Pro
- UPC: 046878268128
Garantia i Suport
The Orbit Pro Series 8-Pattern Thumb Control Hose Nozzle Sprayer is designed for durability and long-lasting performance. Some users have reported a lifetime warranty for this product, indicating Orbit's commitment to quality.
For specific warranty claims, technical support, or replacement parts, please contact Orbit customer service directly. Refer to the product packaging or the official Orbit weblloc web per obtenir la informació de contacte més actualitzada.
Assistència en línia: Visit the official Orbit weblloc web per a preguntes freqüents, registre de productes i recursos d'assistència addicionals.
Atenció al client: Contact Orbit customer service via phone or email for personalized assistance.
