1. Introducció
This manual provides detailed instructions for the assembly, care, and display of the TAMIYA 1:350 USS Fletcher DD445 US Navy WWII Destroyer model kit, model number TAM78012. Please read all instructions carefully before beginning assembly to ensure proper construction and to achieve the best possible result.
The USS Fletcher (DD-445) was the lead ship of the Fletcher-class destroyers, a highly successful class of destroyers built for the United States Navy during World War II. This model kit accurately replicates the historical vessel in 1:350 scale.
2. Informació de seguretat
Avís: This model kit contains small parts and sharp tools may be required for assembly. Keep out of reach of small children. Adult supervision is recommended for younger builders.
- Always use appropriate safety equipment, such as eye protection, when cutting or sanding parts.
- Work in a well-ventilated area when using paints, glues, or solvents. Refer to the safety data sheets (SDS) for specific product warnings.
- Dispose of waste materials responsibly.
- Avoid direct contact with adhesives and paints. Wash hands thoroughly after handling.
3. Contingut del paquet
Before starting assembly, verify that all components are present and undamaged. The kit typically includes:
- Plastic sprues containing model parts.
- Decal sheet.
- Assembly instruction booklet (this document).
- Reference materials (if included).
Note: Adhesives, paints, and tools are sold separately and are not included in this kit.
4. Instruccions de muntatge
Follow the numbered steps provided in the included assembly diagram. Use appropriate modeling tools and adhesives for each step.
4.1. Preparació
- Carefully remove parts from the sprues using a hobby knife or sprue cutters.
- Clean any mold lines or excess plastic (flash) from the parts using a hobby knife or fine-grit sandpaper.
- Test fit parts before applying adhesive to ensure proper alignment.
4.2. Hull Assembly
Begin by assembling the main hull sections. Ensure a strong bond for structural integrity.

Figure 1: The TAMIYA 1:350 USS Fletcher DD445 Destroyer model kit box art. This image shows the completed model on the box, indicating the level of detail and accuracy to expect from the kit.
4.3. Deck and Superstructure
Attach the deck sections and then proceed with the superstructure components. Pay close attention to the orientation of parts as indicated in the diagrams.
4.4. Armament and Details
Assemble and attach the various armament, such as gun turrets, torpedo tubes, and anti-aircraft guns. Add smaller details like railings, ladders, and antennae.
4.5. Painting and Decals
After assembly, the model can be painted according to historical references or personal preference. Apply decals carefully using decal setting solutions for a seamless finish.
5. Displaying Your Model
This is a static display model. Once assembled and painted, it is ready for display. Consider a display case to protect it from dust and damage.
- Col·loqueu el model sobre una superfície plana i estable.
- Avoid direct sunlight or extreme temperature changes, which can cause paint fading or plastic warping.
- Keep away from areas with high humidity.
6. Manteniment i cura
To maintain the appearance of your model:
- Dust regularly with a soft, dry brush or a can of compressed air.
- Avoid using harsh chemicals or abrasive cleaners, which can damage the paint or plastic.
- If parts become loose, re-attach them using appropriate model adhesive.
7. Resolució de problemes comuns
Most issues encountered during model building can be resolved with careful attention to the instructions and proper technique.
| Problema | Causa possible | Solució |
|---|---|---|
| Les peces no encaixen | Excess flash on parts; incorrect part orientation; insufficient cleaning of sprue gates. | Carefully trim and sand parts; re-check assembly diagrams for correct orientation; ensure sprue gates are fully removed. |
| L'adhesiu no s'agafa | Insufficient adhesive applied; incorrect type of adhesive for plastic; parts not held long enough. | Apply a small, even amount of plastic cement; use cement specifically designed for polystyrene plastic; hold parts firmly until bond sets. |
| Decals silvering (clear film visible) | Surface not smooth; air trapped under decal. | Ensure painted surface is glossy before applying decals; use decal setting solution to help decals conform to surface and eliminate air bubbles. |
8. Especificacions del producte
| Característica | Detall |
|---|---|
| Marca | TAMIYA |
| Nom del model | TAM78012 |
| Escala | 1:350 |
| Assumpte | USS Fletcher DD445 US Navy WWII Destroyer |
| Dimensions del producte (caixa) | 18 x 12 x 7 polzades |
| Nombre de peces | 1 (refers to the kit package) |
| ASIN | B07DH8W1W |
9. Garantia i Suport
TAMIYA model kits are manufactured to high standards. If you encounter missing or defective parts, please contact the retailer where you purchased the kit or the official TAMIYA distributor in your region. Please have your proof of purchase and the model number (TAM78012) ready.
For additional support, tips, and community forums, you may visit the official TAMIYA website or reputable model-building communities online.
Note: This product is a model kit and does not typically come with an operational warranty. Warranty claims are generally limited to manufacturing defects or missing components upon initial purchase.
10. Vídeos oficials de productes
No official product videos from the seller were provided in the product data for this model kit. For visual guides or assembly demonstrations, please refer to community-created content on video platforms, or consult the detailed diagrams within the physical instruction booklet.





