Introducció
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your WALI GSDM002 Dual Monitor Gas Spring Desk Mount. Please read this manual thoroughly before installation and retain it for future reference. If you have any questions or require assistance, please contact WALI customer support.
Informació de seguretat
ADVERTIMENT: Failure to read and follow all instructions may result in personal injury or damage to the product. Always ensure the mounting surface can safely support the combined weight of the mount and monitors. Do not exceed the maximum weight capacity. Use safety gear and proper tools during installation.
- Verify VESA compatibility and monitor weight before installation.
- No estrenyeu massa els cargols per evitar danys.
- Assegureu-vos que totes les connexions siguin segures abans de fer-les servir.
- Mantingueu els nens allunyats de les parts mòbils.
Contingut del paquet
Si us plau, comproveu que tots els components siguin presents i no estiguin danyats:
- 1 x WALI Dual Monitor Gas Spring Stand
- Kit de maquinari de muntatge
- Manual d'usuari
Image: The WALI GSDM002 Dual Monitor Gas Spring Desk Mount, showcasing its two monitor arms attached to a central pole, with both C-clamp and grommet mounting options visible.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | GSDM002 |
| Mida de pantalla compatible | 13" a 32" |
| Capacitat màxima de pes | 19.8 lbs per arm |
| Compatibilitat VESA | 75x75mm, 100x100mm |
| Opcions de muntatge | C-Clamp, Base d'orella |
| C-Clamp Interval de gruix | 0.39" - 2.76" |
| Grommet Base Thickness Range | 0.39" - 1.97" |
| Interval d'inclinació | +70° / -45° |
| Gamma giratòria | +/-180° |
| Rotació | 360° |
| Altura màx | 26.6" |
| Extensió màxima | 20.3" |
| Material | Acer d'aliatge |
Configuració i instal·lació
Pas 1: Trieu la vostra opció de muntatge
The WALI GSDM002 offers two installation methods: C-clamp or Grommet Base. Select the option that best suits your desk.
Image: A visual comparison of the C-clamp mounting method, which secures to the edge of a desk, and the grommet base method, which uses an existing hole in the desk.
C-Clamp Instal·lació:
- Enganxeu el C-clamp fins a la part inferior del pal principal.
- Posicioneu el C-clamp on the edge of your desk and tighten the knob until secure. Ensure the desk thickness is between 0.39" and 2.76".
Instal·lació de la base de l'oxell:
- Si el vostre escriptori té un forat per a ulleres, inseriu la base de l'uller a través del forat.
- Secure the base from underneath the desk using the provided hardware. Ensure the desk thickness is between 0.39" and 1.97".
Pas 2: Fixeu els braços del monitor al pal
Slide the monitor arms onto the central pole at your desired height. Use the provided Allen key to tighten the set screws on the arms to secure them in place.
Step 3: Attach Monitors to VESA Plates
- Carefully attach your monitors to the VESA plates on each arm using the appropriate screws from the hardware kit. Ensure your monitors have VESA mounting holes (75x75mm or 100x100mm).
- Confirm that each monitor weighs no more than 19.8 lbs.
Image: Two monitors are shown mounted on the WALI GSDM002, demonstrating its compatibility with large screens and flexible orientation, with one monitor in portrait mode and the other in landscape mode.
Funcionament i ajustos
Posicionament del monitor
The gas spring arms allow for flexible positioning of your monitors. You can adjust the height, tilt, swivel, and rotation to achieve an ergonomic viewangle de ing.
- Ajust d'alçada: Empenyeu o estireu suaument el monitor amunt o avall.
- Inclinació: Tilt the monitor screen +70° upwards or -45° downwards.
- Girar: Swivel the monitor +/-180° horizontally.
- Rotació: Gireu el monitor 360° per a l'orientació vertical o horitzontal.
Image: A diagram illustrating the full range of motion for the monitor arm, including tilt (+70°/-45°), swivel (+/-180°), and 360° rotation, with monitors shown in various positions.
Image: A diagram highlighting the adjustable extension (up to 20.3 inches) and height (up to 16.5 inches) of the monitor arm, demonstrating its reach and vertical range.
Ajust de la tensió de la molla de gas
The gas spring tension may need adjustment based on your monitor's weight to ensure it holds its position. An Allen key is provided for this purpose.
- For lighter monitors: Turn the adjustment screw clockwise to decrease tension.
- For heavier monitors: Turn the adjustment screw counter-clockwise to increase tension.
Imatge: Un primer pla view of the gas spring tension adjustment point on the monitor arm, showing an Allen key being used to turn the screw for calibration.
Gestió de cables
Integrated cable management clips are provided along the arms and on the central pole to keep your cables tidy and organized. Route your monitor and power cables through these clips to maintain a clean workspace.
Manteniment
To ensure the longevity and proper function of your WALI monitor mount, follow these maintenance guidelines:
- Reviseu regularment tots els cargols i connexions per assegurar-vos que estiguin ben ajustats.
- Netegeu la muntura amb un drap suauamp tela. Eviteu els netejadors abrasius.
- Do not apply lubricants to the gas spring mechanism unless specifically instructed by WALI support.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El monitor s'enfonsa o no es manté en posició. | La tensió de la molla de gas és massa baixa per al pes del monitor. | Increase gas spring tension by turning the adjustment screw counter-clockwise. |
| Monitor is difficult to move. | La tensió de la molla de gas és massa alta per al pes del monitor. | Decrease gas spring tension by turning the adjustment screw clockwise. |
| La muntura sembla inestable. | C-clamp o la base de l'unell no està ben ajustada. | Torneu a apretar el C-clamp or grommet base. Ensure desk thickness is within specified limits. |
| Els monitors no estan anivellats. | Minor adjustment needed at the VESA plate. | Adjust the leveling screws on the VESA plate or slightly rotate the monitor. |
Garantia i Suport
WALI products are designed for durability and performance. This product comes with a standard limited warranty. For specific warranty details, please refer to the warranty card included with your purchase or visit the official WALI weblloc.
For technical assistance, missing parts, or any other inquiries, please contact our experienced and friendly US-based customer support team. Support is available 7 days a week.
Informació de contacte: Please refer to the contact details provided on the WALI weblloc web o l'embalatge del producte.
