Progress Lighting Beam LED Vanity Light Instruction Manual

1. Introducció

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Progress Lighting Beam LED Bath Vanity Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image 1.1: The Beam LED Bath Vanity Light, featuring a brushed nickel finish and etched opal glass diffuser.

The Beam LED Bath Vanity Light features a squared, tubular opal glass diffuser paired with a modern metal canopy. It incorporates an integrated LED light source designed for energy efficiency and long-lasting performance. This fixture is suitable for both residential and commercial applications and can be installed horizontally or vertically.

2. Configuració i instal·lació

2.1 Informació de seguretat

• Always turn off the main power supply at the circuit breaker before installing or servicing the fixture.
• Consulteu un electricista qualificat si no esteu familiaritzats amb les instal·lacions elèctriques.
• Assegureu-vos que totes les connexions elèctriques compleixin els codis i les ordenances locals.
• This fixture is designed for indoor, wall-mount installation.
• Si us plau, consulteu les lleis locals abans de comprarasing i instal·lant aquest producte.

2.2 Components inclosos

Your package should contain the Beam LED Vanity Light fixture and a detailed installation sheet. Please verify all parts are present before proceeding.

2.3 Passos d'instal·lació (generals)

1. Prepareu l'àrea d'instal·lació: Turn off power at the circuit breaker. Remove any existing fixture.
2. Muntar la placa de muntatge: Secure the mounting plate to the junction box in the wall using the provided screws.
3. Fer connexions elèctriques: Connect the fixture's wires to the household electrical wires according to the installation sheet. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
4. Assegureu el dispositiu: Attach the fixture body to the mounting plate, ensuring all wires are tucked safely inside the junction box.
5. Instal·leu el difusor de vidre: Carefully place the etched opal glass diffuser onto the fixture.
6. Restaura l'alimentació: Turn on the power at the circuit breaker and test the light.

2.4 Sizing and Placement Guidelines

For optimal lighting, consider the following guidelines for vanity light placement:

Image 2.1: Dimensional drawing of the Beam LED Vanity Light, showing its length of 22.25 inches, width of 3 inches, and height of 4.75 inches.

• The vanity light should be approximately 3/4 the width of your mirror, and never longer than the mirror itself.
• For double sinks or wider countertops, consider a larger fixture or multiple fixtures for adequate illumination.
• Mount the fixture above the bathroom mirror, ideally between 75 to 80 inches from the floor.
• If using wall sconces on either side of the mirror, place them at eye level (about 65 inches from the floor) and 2-3 inches from the mirror's edge, approximately 28-30 inches apart.

3. Instruccions de funcionament

The Beam LED Vanity Light is designed for simple operation. Once properly installed and connected to a power source, it can be controlled via a standard wall switch or a compatible remote control system, as indicated by its 'Dimmable' and 'Remote Control' features.

• Encès/apagat: Feu servir l'interruptor de paret connectat al llum per encendre o apagar-lo.
• Funció d'atenuació: This fixture is dimmable. If connected to a compatible dimmer switch, you can adjust the light intensity to your preference. Ensure your dimmer switch is rated for LED lighting.
• Comandament a distància: If a remote control system is installed and paired with the fixture, use the remote to control power and dimming functions.

4. Manteniment

Regular maintenance will help preserve the appearance and functionality of your Beam LED Vanity Light.

• Neteja: To clean the fixture, ensure the power is off. Wipe the metal surfaces with a soft, dry cloth. For the glass diffuser, use a soft cloth dampened with a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could damage the finish or glass.
• Font de llum LED: The integrated LED light source is designed for long life and is not user-replaceable. Do not attempt to disassemble the LED module.
• Inspecció: Periodically check for any loose connections or signs of wear. If any issues are found, turn off power and consult a qualified electrician.

5. Solució De Problemes

If your Beam LED Vanity Light is not functioning correctly, refer to the following common issues and solutions:

Si aquests passos no resolen el problema, poseu-vos en contacte amb l'atenció al client.

6. Especificacions

7. Informació de la garantia

Progress Lighting offers a Garantia limitada de 5 anys on this product. This warranty guarantees your complete satisfaction with your purchase and includes professional after-sales customer service support. For detailed terms and conditions, please refer to the warranty documentation included with your product or contact customer support.

8. Atenció al client

For further assistance, technical support, or warranty claims, please visit the official Progress Lighting store or contact their customer service.

Visit Progress Lighting Store