Progress Lighting Blanco LED Collection 32" Faux White Marble Etched White Glass Luxe Bath Vanity Light User Manual

Producte acabatview

The Blanco LED collection bath and vanity fixture features a classic form with contemporary updates. It includes Brushed Nickel accents that complement a Faux White Marble frame and canopy, designed to minimize visible hardware for an elegantly modern effect. This fixture is suitable for both residential and commercial applications and can be installed vertically or horizontally, making it versatile for Modern, Luxe, or Mid-Century interiors. This specific model is a 32" Linear LED Bath fixture with a Faux White Marble finish.

Especificacions

Configuració i instal·lació

Before beginning installation, ensure the power supply is turned off at the circuit breaker. This fixture is designed for indoor use and can be mounted either vertically or horizontally to suit your design preference. Refer to the included installation sheet for detailed wiring instructions and mounting hardware. Professional installation is recommended for electrical work.

For optimal lighting and aesthetic appeal, consider the following placement guidelines:

• When installing above a mirror, the fixture should be approximately 3/4 the width of the mirror, and never longer than the mirror itself.
• For double sink vanities or wider countertops, consider a larger fixture with multiple lights (4, 5, or 6 lights) sized about 3/4 the width of the mirror or no wider than the vanity cabinet. Alternatively, use two vanity lights of the same design, installing one over each sink for a symmetrical look.
• Mount fixtures above the bathroom mirror at about 75-80 inches from the floor.
• If using wall sconces on either side of the mirror, place them at eye level, approximately 65 inches from the floor, and 2-3 inches from the mirror's edge. They should be approximately 28-30 inches apart.

Guia de vídeo d'instal·lació:

Watch this official video from Progress Lighting for detailed sizing and placement guidelines for bathroom lighting fixtures.

Instruccions de funcionament

This LED bath vanity light is dimmable, allowing you to adjust the light output to create the desired ambiance. Ensure you use a compatible LED dimmer switch for optimal performance. Consult the dimmer switch manufacturer's instructions for proper installation and operation.

Manteniment

To maintain the appearance and performance of your Progress Lighting fixture, follow these simple guidelines:

• Always turn off the power supply before cleaning.
• Netegeu l'aparell amb un drap suau i sec.
• No utilitzeu netejadors, dissolvents o poliments abrasius, ja que poden danyar l'acabat.
• Avoid direct contact with water or excessive moisture.

Resolució de problemes

If you experience issues with your light fixture, consider the following common troubleshooting steps:

• La llum no s'encén:
  • Comproveu si hi ha corrent a l'interruptor.
  • Assegureu-vos que totes les connexions dels cables estiguin segures.
  • Verify the dimmer switch (if installed) is compatible and functioning correctly.
• La llum parpelleja o s'atenua inesperadament:
  • Confirm the dimmer switch is rated for LED lighting.
  • Comproveu si hi ha connexions de cablejat soltes.
• Soroll inusual:
  • Assegureu-vos que l'aparell estigui ben muntat.

If problems persist after attempting these steps, contact a qualified electrician or Progress Lighting customer support.

Garantia i Suport

This Progress Lighting fixture is covered by a Garantia limitada d'5 anyAquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús i servei normals. Si us plau, conserveu el comprovant de compra per a reclamacions de garantia.

For technical assistance, warranty inquiries, or replacement parts, please contact Progress Lighting customer support. Refer to the official Progress Lighting website or the included installation sheet for contact information.

Podeu visitar el Progress Lighting Store on Amazon per obtenir més informació sobre el producte i recursos d'assistència.