Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your SRAM NX Eagle Chain. Designed for 12-speed drivetrains, this chain incorporates Eagle PowerLock and FLOW LINK technology to ensure reliable performance and durability. Its robust construction is suitable for various cycling disciplines, including e-bike applications.
Figure 1: SRAM NX Eagle Chain, 12-Speed, 126 Links.
Figure 2: SRAM NX Eagle Chain with included PowerLock master link.
Configuració
Proper installation is crucial for optimal performance and longevity of your SRAM NX Eagle Chain. This chain is designed for 12-speed Eagle drivetrains and comes with a single-use PowerLock master link for secure connection.
Chain Length Determination
Before installation, determine the correct chain length for your specific bicycle setup. Incorrect chain length can lead to poor shifting performance, increased wear, or damage to drivetrain components. Consult your bicycle's manufacturer guidelines or a professional mechanic for precise chain length calculation.
Passos d'instal·lació
- Route the chain through the front chainring, over the cassette, and through the derailleur pulleys according to your derailleur's specifications.
- Bring the two ends of the chain together. Ensure the chain is routed correctly and not twisted.
- Connect the chain ends using the provided SRAM PowerLock master link. Align the two halves of the PowerLock, insert the pins into the chain links, and firmly snap them together.
- To secure the PowerLock, apply firm pressure to the pedals or pull the chain taut until the link fully engages. A distinct 'click' indicates proper engagement.
- Verify that the PowerLock is fully seated and the chain moves freely through all gears.
Note: The PowerLock master link is designed for single use. Always use a new PowerLock when replacing or re-installing your chain.
En funcionament
The SRAM NX Eagle Chain is engineered for smooth and efficient shifting across your 12-speed Eagle drivetrain. Its FLOW LINK technology ensures better chain-guiding and increased longevity.
Shifting Performance
The chain's design, with solid pin construction, contributes to improved wear resistance on both cassettes and chainrings, leading to consistent and reliable shifting. When shifting, apply consistent pedal pressure. Avoid extreme cross-chaining (e.g., largest front chainring with largest rear cog, or smallest front chainring with smallest rear cog) as this can increase wear and reduce shifting efficiency.
E-Bike Compatibility
This chain is designed to withstand the higher torque and power output of e-bikes, offering enhanced durability for motorized bicycle applications.
Manteniment
Regular maintenance extends the life of your SRAM NX Eagle Chain and ensures consistent performance.
Neteja
- Clean your chain regularly, especially after riding in wet or dirty conditions. Use a dedicated chain cleaner and brush to remove grime and old lubricant.
- Rinse the chain thoroughly with water and dry it completely before applying new lubricant.
Lubricació
- Apply a high-quality bicycle chain lubricant to each link. Allow the lubricant to penetrate for a few minutes.
- Wipe off any excess lubricant from the exterior of the chain to prevent dirt accumulation.
Comprovació de desgast
- Periodically check your chain for wear using a chain wear indicator tool. A worn chain can accelerate wear on your cassette and chainrings.
- Replace the chain when it reaches the recommended wear limit to prevent premature wear of other drivetrain components.
Resolució de problemes
Below are common issues and potential solutions related to your bicycle chain.
| Problema | Causa possible | Solució |
|---|---|---|
| Poor Shifting / Skipping Gears | Worn chain, worn cassette/chainrings, improperly adjusted derailleur, dirty/unlubricated chain. | Check chain wear and replace if necessary. Clean and lubricate chain. Adjust derailleur. Inspect cassette and chainrings for wear. |
| Chain Noise (Squeaking/Grinding) | Lack of lubrication, dirt/grime, bent chain link. | Clean and lubricate chain. Inspect chain for damaged links and replace if found. |
| Chain Breaking | Improper installation of master link, excessive wear, manufacturing defect, extreme force. | Ensure PowerLock is correctly engaged. Replace worn chain. Contact support if defect is suspected. |
Especificacions
| Característica | Detall |
|---|---|
| Marca | SRAM |
| Nom del model | C0C854 |
| Número de part | CHPC8031011 |
| Velocitat | 12 Velocitat |
| Enllaços | 126 Enllaços |
| Color | Black (Note: Product title states Gray, but specifications list Black. Please verify product color upon receipt.) |
| Material | Acer d'aliatge |
| Pes de l'article | 200 grams |
| Capacitat de càrrega | 1 E+3 N |
| Tipus de fil | Doble |
| Usos recomanats | Cycling, Motorcycle (Note: Primary use is cycling, but listed as motorcycle in specifications.) |
| UPC | 710845813085 |
| Data de primera disponibilitat | 14 de juny de 2018 |
Garantia
The SRAM NX Eagle Chain comes with a 2 anys de garantia del fabricant. Please retain your proof of purchase for any warranty claims. For detailed terms and conditions, refer to the official SRAM warranty policy or contact SRAM customer support.
Suport
For further assistance, technical questions, or to report issues, please visit the official SRAM website or contact their customer support. Always refer to the latest product documentation available from the manufacturer for the most up-to-date information.
