1. Introducció
This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.
Davant view of the Behringer NX1000 ampvidador, espectacleasinel seu disseny compacte i els controls del panell frontal.
2. Què hi ha a la caixa
Verifiqueu que tots els components siguin presents en desembalar-lo:
- Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampmés viu
- Cable d'alimentació
- Manual d'instruccions (aquest document)
3. Característiques clau
- Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
- Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
- Ultra-efficient switch-mode power supply for noise-free audio, superior transient response and low power consumption.
- Built-in stereo crossover with low-cut, high-cut and full range Mode.
- SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.
An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.
A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.
4. Configuració
Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampmés viu:
4.1. Muntatge en bastidor
The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.
Side profile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.
4.2. Connexions d'àudio
Connecteu la font d'àudio (mesclador, preamplificador)amplificador, etc.) a la amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.
Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.
Detallada view of the rear panel, showing input and output connectors for audio signals and speakers.
4.3. Connexió d'alimentació
Connect the supplied power cable to the AC inlet on the rear panel of the amplificador i després a una presa de corrent adequada.
4.4. Guia de vídeo de configuració
A step-by-step guide on how to set up D Series amplifiers, covering speaker connections, input sources, and mode selection for various audio configurations.
5. Funcionament del Ampmés viu
5.1. Encès / apagat
Premeu el botó PODER interruptor del panell frontal per engegar el amplifier on or off. The PODER LED will illuminate when the unit is active.
Close-up of the power button, indicating its location on the front panel.
5.2. Controls de volum
Ajusteu el CANAL A i CANAL B gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.
5.3. Selecció de mode
On the rear panel, use the MODE canvia per seleccionar entre ESTÈREO, PONTAT, o PARAL·LEL operation, depending on your speaker configuration requirements.
- ESTÉREO: Each channel operates independently, providing separate left and right audio signals.
- BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
- PARAL·LEL: Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.
5.4. Configuració del crossover
Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.
5.5. Indicadors LED
El panell frontal inclou diversos indicadors LED:
- PRO (Protect): S'il·lumina si el amplifier enters protection mode due to overload, overheating, or short-circuit.
- LÍMIT: Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
- SENYAL: Lights up when an audio signal is present on the respective channel.
- POTÈNCIA: Indica que el ampel lifier està encès.
5.6. Producte acabatview Vídeo
Un acabatview video demonstrating the features and connectivity options of the D Series power amplifiers, including front panel controls, input/output configurations, and operational modes.
6. Manteniment
Per garantir la longevitat i el rendiment òptim del vostre amplifier, follow these maintenance tips:
- Mantingueu la unitat neta netejant-la amb un drap suau i sec. Eviteu utilitzar productes de neteja o dissolvents abrasius.
- Assegureu-vos una ventilació adequada al voltant amplifier to prevent overheating. Do not block the ventilation grilles.
- Comproveu regularment totes les connexions dels cables per assegurar-vos que estiguin ben ajustades i que no presentin signes de desgast.
7. Solució De Problemes
If you encounter issues with your Behringer NX1000 amplifier, consulteu els següents problemes i solucions habituals:
- Sense sortida de so:
- Check all audio input and output connections.
- Assegureu-vos el amplifier is powered on and the POWER LED is illuminated.
- Verify that input sources are active and sending a signal.
- Adjust channel gain knobs and master volume on your mixer/preamp.
- So distorsionat:
- Check if the LIMIT LED is illuminated; reduce input level if it is.
- Assegureu-vos que la impedància de l'altaveu coincideixi amb la ampcapacitats del lificador.
- Inspect speaker cables for damage or incorrect wiring.
- Amplifier Enters Protect Mode (PRO LED illuminated):
- Apagueu el amplifier and disconnect all speakers.
- Check for short circuits in speaker cables or faulty speakers.
- Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
- Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
- Soroll excessiu del ventilador:
- Assegureu-vos el amplifier has sufficient airflow and is not in an enclosed space.
- Clean any dust buildup from the fan and ventilation grilles.
8. Especificacions
| Característica | Detall |
|---|---|
| Nom del model | NX1000 |
| Potència de sortida (2 ohms) | 2 x 500 watts |
| Potència de sortida (4 ohms) | 2 x 300 watts |
| Power Output (4 Ohms Bridged) | 1000 watts |
| Pes | 7.3 lliures / 3.3 kg |
| AmpClasse lifier | Classe D |
| Loudspeaker Impedance Compensation | SmartSense |
| Encreuament | Built-in stereo (low-cut, high-cut, full range) |
| Font d'alimentació | Ultra-efficient switch-mode |
| Dimensions del producte | 19.02 x 9.09 x 3.7 polzades |
| Tecnologia de connectivitat | Amb cable |
| Mode de sortida d'àudio | estèreo |
| Nombre de circuits | 2 |
9. Garantia i assistència
The Behringer NX1000 amplifier ve amb a Garantia limitada. For detailed warranty information, product support, or service inquiries, please visit the official Behringer weblloc web o contacteu directament amb el seu servei d'atenció al client.
Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.
