Manuals+

Kidde K-278B-1120

Manual d'usuari de l'estació d'alarma d'incendis Kidde

Model: K-278B-1120

Marca: Kidde

1. Introducció i finalview

This manual provides essential information for the proper installation, operation, and maintenance of the Kidde K-278B-1120 Fire Alarm Pull Station. This device is designed to manually initiate a fire alarm signal within a conventional fire alarm system.

The Kidde K-278B-1120 is a double-action, key-reset pull station featuring a red finish and designed for wall mounting. It is intended for use with 24V DC/125V AC conventional fire alarm systems.

2. Informació de seguretat

Instruccions importants de seguretat:

  • Installation of this fire alarm pull station should only be performed by qualified personnel in accordance with all local and national electrical codes and fire safety regulations.
  • Always disconnect power to the fire alarm control panel before performing any installation, maintenance, or troubleshooting.
  • Do not paint over the pull station or obstruct its operation in any way.
  • Regular testing of the fire alarm system, including pull stations, is crucial for ensuring proper functionality. Refer to local fire codes for testing frequency.
  • This device is part of a life safety system. Any malfunction or damage must be addressed immediately by a qualified technician.

3. Components

The Kidde K-278B-1120 Fire Alarm Pull Station consists of the following primary components:

  • Red Housing: The main body of the pull station, designed for visibility.
  • Activation Handle: The mechanism labeled "PULL FOR FIRE" that is pulled to activate the alarm.
  • Lift Cover: The upper part of the handle mechanism, labeled "LIFT THEN PULL HANDLE," which must be lifted before the handle can be pulled.
  • Key Reset Mechanism: A key-operated lock used to reset the pull station after activation.
  • Terminals elèctrics: Located inside the housing for connection to the fire alarm control panel wiring.
Red Kidde Fire Alarm Pull Station with 'LIFT THEN PULL HANDLE' and 'PULL FOR FIRE' text
Aquesta imatge mostra la part frontal view of the Kidde Fire Alarm Pull Station, highlighting its red finish and the clear instructions for activation: "LIFT THEN PULL HANDLE" and "PULL FOR FIRE". The Kidde logo is visible at the bottom.

4. Configuració i instal·lació

The Kidde K-278B-1120 Fire Alarm Pull Station is designed for wall mounting and integration into conventional fire alarm systems. Professional installation is highly recommended to ensure compliance with safety standards and proper system functionality.

4.1. Comprovacions prèvies a la instal·lació

  • Verify that the fire alarm control panel is compatible with a 24V DC or 125V AC manual pull station.
  • Ensure the installation location meets local fire code requirements for visibility and accessibility.
  • Confirm all necessary wiring and conduit are in place.

4.2. Muntatge

  1. Turn off all power to the fire alarm control panel.
  2. Mount the pull station securely to a standard electrical box or directly to the wall using appropriate fasteners. Ensure it is level and firmly attached.
  3. Route the system wiring into the pull station's housing.

4.3. Cablatge

  1. Connect the fire alarm circuit wiring to the designated terminals inside the pull station. Refer to the wiring diagram provided with your fire alarm control panel and the pull station's internal labels for correct polarity and connections.
  2. Assegureu-vos que totes les connexions estiguin segures i aïllades.
  3. Close the pull station housing carefully after wiring is complete.

4.4. Post-Installation Test

After installation, power up the fire alarm control panel and perform a functional test of the pull station according to the fire alarm system's testing procedures. This typically involves activating the pull station and verifying that the alarm signal is received by the control panel and annunciated.

5. Funcionament

The Kidde K-278B-1120 is a double-action pull station, requiring two distinct movements to activate the alarm.

5.1. Activating the Alarm

  1. In the event of a fire or emergency requiring alarm activation, ASCENSOR the upper cover of the pull station, which is labeled "LIFT THEN PULL HANDLE".
  2. Once the cover is lifted, TIR ABAIX the handle labeled "PULL FOR FIRE" firmly.
  3. This action will send an alarm signal to the connected fire alarm control panel, initiating the building's fire alarm sequence.

5.2. Resetting the Pull Station

After activation, the pull station must be reset using its key to return it to its normal, non-alarm state.

  1. Insert the provided reset key into the keyhole on the side or front of the pull station.
  2. Turn the key as indicated (usually a quarter turn) to release the activated handle.
  3. Return the handle to its original, upright position.
  4. Remove the key. The pull station is now reset and ready for future use.

6. Manteniment

Regular maintenance ensures the reliability and longevity of your fire alarm pull station.

  • Inspecció visual: Periodically inspect the pull station for any signs of physical damage, tampering, or obstruction. Ensure the "LIFT THEN PULL HANDLE" and "PULL FOR FIRE" labels are clear and legible.
  • Neteja: Gently wipe the exterior of the pull station with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
  • Prova funcional: Conduct periodic functional tests as required by local fire codes and the fire alarm system manufacturer's recommendations. This typically involves activating the pull station and verifying the alarm, then resetting it.
  • Gestió de claus: Keep the reset key in a secure, accessible location known only to authorized personnel.

7. Solució De Problemes

If you encounter issues with your Kidde K-278B-1120 Fire Alarm Pull Station, consider the following:

Problema Causa possible Solució
L'estació de prémer no activa l'alarma. Improper wiring; Faulty pull station; Issue with fire alarm control panel. Verify wiring connections. Test with a multimeter if qualified. Contact a qualified fire alarm technician for inspection and repair.
L'estació de tracció no es pot reiniciar. Incorrect key; Damaged reset mechanism; Obstruction. Ensure the correct key is used. Check for any physical obstructions. If mechanism is damaged, contact a qualified technician for replacement.
Alarm activates without pulling the handle. Faulty pull station; Wiring short; Issue with fire alarm control panel. Immediately contact a qualified fire alarm technician to diagnose and resolve the issue. This indicates a critical system fault.

For any issues that cannot be resolved with the above steps, or for any concerns regarding the fire alarm system, always contact a qualified fire alarm system technician.

8. Especificacions

Atribut Detall
Número de model K-278B-1120
Marca Kidde
Color Vermell
Tipus d'activació Double Action (Lift then Pull)
Restableix el tipus Restabliment de claus
Tipus de muntatge Muntatge a la paret
Dimensions (aproximades) Length: 3 9/16 in (9.05 cm)
Height: 5 3/16 in (13.18 cm)
Depth: 3 5/8 in (9.21 cm)
Pes 0.8 unces (aproximadament 22.7 grams)
Compatibilitat 24V DC / 125V AC Conventional Fire Alarm Systems
Gamma d’humitat Fins a un 95% d'HR (sense condensació)

9. Garantia i Suport

For specific warranty information regarding your Kidde K-278B-1120 Fire Alarm Pull Station, please refer to the documentation included with your purchase or contact Kidde directly. Warranty terms may vary based on region and purchase date.

For technical support, product inquiries, or to locate authorized service providers, please visit the official Kidde weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.

You can find more information about Kidde products by visiting the Botiga Kidde a Amazon.

Documents relacionats - K-278B-1120

Preview Detectors de fum i CO Kidde Firex Series: Guia del producte, neteja i resolució de problemes
Guia completa dels detectors de fum i CO de la sèrie Kidde Firex, inclosa la informació del producteview, instruccions de neteja, indicadors visuals/audibles i passos per a la resolució de problemes per a models com el Kidde Fire 21033081.
Preview Detector de fum òptic Kidde 2SFWR amb capacitat sense fil: especificacions tècniques
Especificacions tècniques i característiques detallades de l'alarma de fum òptica Kidde 2SFWR, una unitat alimentada per xarxa elèctrica amb interconnexió sense fil i bateria de liti recarregable. Inclou informació sobre la instal·lació, els estàndards de seguretat i el rendiment.
Preview Guia d'usuari del controlador d'alarma d'incendis Kidde Cavius ​​9101
Guia d'usuari per al controlador d'alarma d'incendis Kidde Cavius, model 9101. Proporciona informació sobre les característiques, la instal·lació, el funcionament, les proves i la resolució de problemes dels detectors de fum i calor sense fil interconnectats.
Preview Guia de l'usuari del detector de fum Kidde: instal·lació, funcionament i seguretat per als models i12020ACA, i12040ACA, P12040CA
Aquesta guia de l'usuari proporciona instruccions detallades per instal·lar, fer funcionar i mantenir els detectors de fum Kidde i12020ACA, i12040ACA i P12040CA. Obteniu informació sobre la col·locació recomanada, el cablejat, els procediments de prova, els consells de seguretat contra incendis i la informació sobre la garantia per garantir una protecció òptima de la llar.
Preview Kidde P4010ACSCO-WF Smoke + Carbon Monoxide Alarm with Smart Features
Product data sheet for the Kidde P4010ACSCO-WF, a 2-in-1 Wi-Fi enabled Smoke and Carbon Monoxide alarm with smart features, remote notifications, and 10-year battery backup. Includes technical specifications, features, and important safety information.
Preview Guia de presentació de solucions d'alarma d'incendis intel·ligents de la sèrie Kidde VS
Exploreu la sèrie Kidde VS, un sistema d'alarma d'incendis intel·ligent i direccionable analògic dissenyat per a edificis petits i mitjans. Aquesta guia de presentació detalla les seves característiques, components i solucions per a una protecció integral contra incendis.