1. Introducció
This manual provides essential instructions for the safe and effective operation, maintenance, and care of your Einhell GE-LC 36/35 Li Solo Battery Chainsaw. Please read this manual thoroughly before using the chainsaw for the first time and keep it for future reference. This product is designed for cutting wood and similar materials.
Image 1.1: The Einhell GE-LC 36/35 Li Solo Battery Chainsaw, showing the main unit and an outline of where the batteries are inserted.
2. Instruccions de seguretat
Prioritzeu sempre la seguretat quan feu servir eines elèctriques. Si no seguiu aquestes instruccions, podeu patir lesions greus o danys materials.
2.1 Seguretat general
- Utilitzeu equips de protecció individual (EPI): Always wear safety glasses, hearing protection, gloves, sturdy footwear, and appropriate clothing. A safety helmet with a face shield is recommended.
- Àrea de treball: Ensure the work area is clear of bystanders, children, and pets. Keep the area well-lit and free from obstacles.
- Condicions meteorològiques: Do not use the chainsaw in rain or damp conditions. Avoid operating in strong winds.
- Seguretat de la bateria: Use only recommended Einhell Power X-Change batteries. Do not expose batteries to heat or fire.
2.2 Seguretat específica de la motoserra
- Prevenció de contracops: Be aware of the kickback danger zone. Avoid cutting with the tip of the guide bar. Maintain a firm grip with both hands.
- Fre de cadena: Ensure the chain brake is functional before each use. It is designed to stop the chain quickly in case of kickback.
- Adherència adequada: Always hold the chainsaw firmly with both hands, with your thumbs and fingers encircling the handles.
- Cutting Position: Maintain a balanced stance. Do not overreach. Cut at waist height or below if possible.
Image 2.1: The chain brake lever, which activates the kickback protection system, shown in the engaged (stop) position.
3. Producte acabatview
The Einhell GE-LC 36/35 Li Solo is a powerful cordless chainsaw featuring a brushless motor for extended operation and efficiency. It is part of the Einhell Power X-Change family, requiring two 18V batteries for 36V power.
3.1 Característiques clau
- Brushless Motor: For enhanced power and longer run time.
- Kickback Protection System: Automatically shuts off the saw upon chain lock.
- Oregon Branded Quality Chain and Bar: 14-inch guide bar for reliable cutting performance.
- Tool-free Chain Tension Adjustment: For quick and easy adjustments.
- Automatic Chain Lubrication: Ensures consistent chain oiling during operation.
- Metal Grip Claws: For secure handling and stability during cuts.
- Soft Grip Handle: For comfortable operation.
Imatge 3.1: Primer pla view of the 14-inch Oregon branded chain and guide bar, indicating its quality and low kickback design.
Image 3.2: Detail of the metal grip claws, providing improved stability and control during cutting operations.
4. Configuració
Before operating your chainsaw, ensure it is properly assembled and prepared.
4.1 Desembalatge
Carefully remove all components from the packaging. Verify that all parts are present and undamaged. Refer to the parts list in your product documentation for a complete inventory.
4.2 Instal·lació de la bateria
The GE-LC 36/35 Li Solo requires two 18V Einhell Power X-Change batteries (not included). Ensure batteries are fully charged before use.
- Locate the battery compartments on the chainsaw.
- Slide each charged battery into its respective compartment until it clicks securely into place.
- To remove, press the release button on the battery and pull it out.
Image 4.1: Hands demonstrating the correct method for inserting a Power X-Change battery into the chainsaw's battery slot.
Image 4.2: A graphic clearly stating that the battery and charger are not included with the 'Solo' version of the product.
4.3 Chain and Bar Assembly & Tensioning
The chainsaw features tool-free chain tension adjustment.
- Assegureu-vos que el fre de la cadena estigui desactivat.
- Loosen the side cover knob by turning it counter-clockwise.
- Col·loqueu la cadena al voltant del pinyó i la barra guia, assegurant-vos que les vores de tall estiguin orientades en la direcció correcta.
- Fit the guide bar and chain onto the chainsaw body, aligning the bar studs.
- Tighten the side cover knob slightly.
- Adjust chain tension by turning the tensioning wheel (usually located near the side cover knob) until the chain is snug against the guide bar but can still be pulled freely by hand. There should be no more than 2-3mm of sag in the middle of the bar.
- Fully tighten the side cover knob.
Image 4.3: A visual representation of the tool-free chain tensioning mechanism, highlighting the ease of adjustment without additional tools.
4.4 Chain Oil Filling
The chainsaw has an automatic chain lubrication system, but the oil reservoir must be filled before use.
- Col·loqueu la motoserra sobre una superfície plana.
- Unscrew the oil tank cap (refer to Image 4.4).
- Ompliu el dipòsit amb oli de cadena i de barra d'alta qualitat. No utilitzeu oli usat ni oli de motor.
- Substituïu la tapa amb seguretat.
Image 4.4: Close-up of the oil tank cap, indicating its location for refilling the automatic chain lubrication system.
5. Instruccions de funcionament
Follow these steps for safe and effective operation of your chainsaw.
5.1 Inici i aturada
- Ensure batteries are installed and chain oil reservoir is full.
- Disengage the chain brake by pulling the lever back towards the front handle.
- Press the safety lock-off button (if present) and then squeeze the trigger switch to start the chainsaw.
- To stop, release the trigger switch. Engage the chain brake immediately after stopping the cut or when moving between cuts.
5.2 Tècniques de tall
- Planning the Cut: Before cutting, assess the wood for stability, potential kickback, and pinch points.
- Fent el tall: Allow the chain to reach full speed before contacting the wood. Apply light pressure and let the saw do the work.
- Tala d'arbres petits: For felling, make a directional notch on the side of the desired fall, then make the felling cut from the opposite side, slightly above the notch.
- Limbing: Work from the bottom up, supporting the branch to prevent pinching.
Image 5.1: A user demonstrating safe operation of the chainsaw, wearing appropriate PPE and cutting a log on a sawhorse.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la motoserra.
6.1 Ajust de la tensió de la cadena
Check chain tension frequently, especially during initial use. A loose chain can derail, and a tight chain can cause excessive wear. Adjust as described in Section 4.3.
Image 6.1: Close-up of the chain tension adjustment knob, illustrating the mechanism for tool-free chain tensioning.
6.2 Lubricació de la cadena
The chainsaw features automatic chain lubrication. Regularly check the oil level in the reservoir and refill as needed (refer to Section 4.4). Ensure the oil port is clear of debris.
Image 6.2: A visual representation of the automatic chain lubrication system, showing oil being dispensed onto the chain during operation.
6.3 Neteja i emmagatzematge
- After each use, remove batteries and clean the chainsaw thoroughly. Remove sawdust and debris from the guide bar, chain, and motor housing.
- Guardeu la motoserra en un lloc sec i segur, fora de l'abast dels nens.
- Feu servir sempre la coberta de la barra guia quan emmagatzemeu o transporteu la motoserra.
7. Solució De Problemes
Aquesta secció tracta problemes comuns que podeu trobar.
| Problema | Causa possible | Solució |
|---|---|---|
| La motoserra no arrenca | Batteries not charged or improperly inserted; Chain brake engaged; Safety switch not pressed. | Charge and reinsert batteries; Disengage chain brake; Press safety lock-off button before trigger. |
| La cadena no es mou | Fre de cadena activat; Cadena massa tensa; Obstrucció. | Desconnecteu el fre de la cadena; ajusteu la tensió de la cadena; elimineu qualsevol obstacle. |
| Mal rendiment de tall | Cadena desafilada; Tensió de la cadena incorrecta; Oli de cadena insuficient. | Sharpen or replace chain; Adjust chain tension; Refill oil reservoir. |
| Vibració excessiva | Cadena fluixa; Cadena o barra guia danyada. | Ajusteu la tensió de la cadena; inspeccioneu la cadena i la barra guia per detectar danys i substituïu-les si cal. |
If problems persist, contact Einhell customer support or a qualified service technician.
8. Especificacions
| Característica | Detall |
|---|---|
| Model | GE-LC 36/35 Li Solo (4501780) |
| Font d'alimentació | Battery Powered (2 x 18V Power X-Change batteries required for 36V operation) |
| Voltage | 36 Volts |
| Cavalls de força | 5 CV |
| Longitud de la cadena | 14 polzades |
| Velocitat de la cadena | Approximately 15 m/s |
| Pes de l'article | 3.94 quilograms (8.67 lliures) |
| Fabricant | EINHELL |
Image 8.1: A graphic illustrating the chain speed of 15 meters per second, indicating efficient cutting performance.
9. Garantia i Suport
For warranty information, product registration, or technical support, please refer to the official Einhell weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Per obtenir més ajuda, visiteu el Einhell official weblloc.
