Manual d'instruccions del compressor d'aire lubricat amb oli Geko G80300 de 24 L

1. Introducció

This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Geko G80300 24-liter oil-lubricated air compressor. This product is designed for durability and solid performance, manufactured from high-quality materials. Please read this manual thoroughly before using the compressor.

Figura 1: Geko G80300 24L Oil-Lubricated Air Compressor. This image shows the complete air compressor unit, featuring the motor housing, air tank, pressure gauges, regulator, and wheels for portability.

2. Instruccions de seguretat

Always observe the following safety precautions to prevent personal injury and damage to the compressor.

• Seguretat elèctrica: Ensure the power supply matches the compressor's requirements. Use a grounded outlet and avoid extension cords unless absolutely necessary and rated for the compressor's power.
• Seguretat de pressió: Never exceed the maximum operating pressure. Do not tamper with the safety valve. Always drain condensation from the tank regularly to prevent corrosion and tank failure.
• Equips de protecció individual (EPI): Wear safety glasses or goggles to protect against flying debris. Use hearing protection as compressors can be noisy.
• Ventilació: Operate the compressor in a well-ventilated area to prevent overheating and accumulation of fumes.
• Parts mòbils: Keep hands, hair, and clothing away from moving parts during operation.
• Superfícies calentes: The compressor pump and motor can become hot during operation. Avoid touching these surfaces to prevent burns.
• Infants i espectadors: Mantingueu els nens i les persones no autoritzades allunyats de la zona d'operació.
• Manteniment: Desconnecteu l'alimentació abans de realitzar qualsevol manteniment o reparació.

3. Components mésview

Familiarize yourself with the main components of your Geko G80300 air compressor.

• Tanc d'aire: Emmagatzema aire comprimit.
• Conjunt motor/bomba: Compresses air into the tank.
• Manòmetres: Display tank pressure and regulated outlet pressure.
• Regulador de pressió: Adjusts the air pressure delivered to tools.
• Vàlvula de seguretat: Releases excess pressure if the tank pressure exceeds a safe limit.
• Vàlvula de desguàs: Located at the bottom of the tank, used to release condensed moisture.
• Oil Sight Glass: Indicates the oil level in the pump.
• Rodes i mànec: Per a la portabilitat.

4. Configuració

Follow these steps to prepare your compressor for first use.

1. Desembalatge: Carefully remove the compressor from its packaging. Inspect for any shipping damage. Report any damage to the retailer immediately.
2. Fixeu les rodes i el mànec: If not pre-assembled, attach the wheels and handle using the provided hardware.
3. Comprovar el nivell d'oli: The compressor is oil-lubricated. Before first use, and periodically thereafter, check the oil level using the oil sight glass. The oil level should be between the minimum and maximum marks. Add appropriate compressor oil if necessary.


Figura 2: Close-up of the oil sight glass. This image highlights the transparent oil sight glass, which allows users to visually check the oil level in the compressor pump.

4. Instal·lació del filtre d'aire: Ensure the air filter is securely installed.
5. Connexió elèctrica: Connect the power cord to a grounded electrical outlet that matches the voltage i amperage requirements of the compressor.

5. Instruccions de funcionament

Steps for using your air compressor.

1. Initial Break-in (First Use):
   • Assegureu-vos que la vàlvula de drenatge a la part inferior del dipòsit estigui tancada.
   • Turn on the compressor. Allow it to run for approximately 15-20 minutes with the tank drain valve open (no pressure build-up) to ensure proper lubrication and break-in of moving parts.
   • Turn off the compressor, close the drain valve, and allow it to cool.
2. Funcionament normal:
   • Tanqueu la vàlvula de drenatge del dipòsit.
   • Connect your air tool to the quick-connect coupler.
   • Turn on the compressor. It will build pressure until it reaches its maximum cut-out pressure and then shut off automatically.
   • Adjust the outlet pressure using the pressure regulator knob to the recommended pressure for your air tool. The regulated pressure will be shown on the outlet pressure gauge.
   • When finished, turn off the compressor. Disconnect the air tool.
   • Depressurize the Tank: Obriu la vàlvula de drenatge o utilitzeu una eina pneumàtica per alliberar tota la pressió d'aire del dipòsit abans de guardar-lo.

6. Manteniment

Regular maintenance ensures optimal performance and extends the life of your compressor. Always disconnect power before maintenance.

• Buidar el dipòsit diàriament: Open the drain valve at the bottom of the tank after each use to release condensed moisture. Failure to do so can lead to tank corrosion and failure.
• Check Oil Level Weekly: Verify the oil level using the sight glass. Add or change oil as needed. Refer to the manufacturer's recommendations for oil type.
• Clean Air Filter Monthly: Remove and clean the air filter element. Replace if damaged or excessively dirty. A clogged filter reduces efficiency.
• Inspeccionar si hi ha fuites: Periodically check all connections and hoses for air leaks. Tighten connections as necessary.
• Neteja general: Keep the compressor clean and free of dust and debris, especially around the motor and pump cooling fins.

7. Solució De Problemes

Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions.

8. Especificacions

Key technical specifications for the Geko G80300 air compressor.

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. Information regarding spare parts availability is not provided in the product specifications.