Introducció
The SONICAKE Black Hammer is a versatile guitar multi-effect pedal designed to provide essential tonal components for metal music. It integrates Boost, Hi-Gain Distortion, Chorus, and Delay effects into a single, compact unit. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Black Hammer pedal to ensure optimal performance.
Davant view of the SONICAKE Black Hammer Multi-Effect Pedal, showcasing its compact design and integrated controls for various effects.
Configuració
Before using your SONICAKE Black Hammer pedal, please follow these steps to ensure proper setup and functionality.
1. Contingut del paquet
- SONICAKE Black Hammer Multi-Effect Pedal
- Manual d'usuari
- Adaptador de corrent continu de 9 V
2. Requisits d'alimentació
The Black Hammer pedal requires a 9V DC power adapter. Ensure the adapter's polarity is negative center. Using an incorrect power supply may damage the unit and void the warranty.
3. Connecting the Pedal
- Connecteu la vostra guitarra al ENTRADA al pedal mitjançant un cable d'instrument estàndard de 1/4 de polzada.
- Connecteu el SORTIDA presa del pedal al vostre ampl'entrada del lificador utilitzant un altre cable d'instrument de 1/4 de polzada.
- Plug the 9V DC power adapter into the DC 9V input on the pedal and then into a power outlet.
The Black Hammer pedal is shown connected to a guitar and amplifier, illustrating a typical setup for use.
Funcionament del pedal
The Black Hammer pedal features four distinct effects, each with intuitive controls and LED indicators for active status.
This image illustrates the four core effects integrated into the Black Hammer pedal: Boost, Hi-Gain Distortion, Chorus, and Delay, each with dedicated controls.
Effect Modules:
- IMPULS: This module provides a pre-gain boost to increase the volume and drive of your signal, ideal for pushing your amplifier or the Hi-Gain section for solos and heavy riffs.
- HI-GAIN: An analog high-gain distortion with a versatile 3-band EQ (Bass, Mid, Treble) and a smart Noise Gate (NR) to eliminate unwanted hum and feedback. The Volume knob controls the overall output level of the distortion.
- COR: A BBD-style analog-sounding chorus effect. Controls include Level (mix of wet/dry signal), Depth (intensity of the chorus effect), and Rate (speed of the chorus modulation).
- RETARD: A 500ms analog-voicing delay. Controls include Mix (wet/dry signal blend), Repeat (number of repeats), and Time (delay time).
Indicadors LED:
Each effect module features LED-illuminated control knobs that clearly indicate their working status. When an effect is active, its corresponding LEDs will light up, providing immediate visual feedback.
Close-up of the pedal's LED-illuminated control knobs, providing clear visual feedback on the active status of each effect, especially useful in low-light conditions.
True Bypass:
The Black Hammer pedal features true bypass switching, ensuring that your guitar's signal remains unaffected when the pedal is disengaged. This preserves your original tone without any coloration or signal degradation.
Manteniment
Proper care and maintenance will extend the lifespan of your SONICAKE Black Hammer pedal.
- Neteja: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners, solvents, or excessive moisture, which can damage the finish or internal components.
- Emmagatzematge: When not in use, store the pedal in a dry, cool environment away from direct sunlight and extreme temperatures. Disconnect the power adapter when storing for extended periods.
- Connexions: Regularly check all input and output jacks for dust or debris. Ensure cables are securely connected to prevent signal loss or intermittent issues.
Resolució de problemes
If you encounter issues with your Black Hammer pedal, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so | Incorrect power supply; loose cable connections; pedal not engaged. | Verify 9V DC power adapter is correctly connected. Check all instrument cables. Ensure the effect is engaged (LEDs lit). |
| Unwanted Noise/Hum | Ground loop; faulty cables; high gain settings. | Use a high-quality isolated power supply. Try different cables. Adjust the Noise Gate (NR) knob on the Hi-Gain section. Reduce gain settings. |
| Efecte no enganxós | Footswitch issue; internal fault. | Ensure the footswitch is fully pressed. If the issue persists, contact customer support. |
| Weak/Distorted Sound | Incorrect level settings; impedance mismatch. | Adjust the Level/Volume knobs on the pedal. Ensure your amplifier's input impedance is compatible. |
Especificacions
- Pes de l'article: 1.1 lliures (0.5 quilograms)
- Dimensions del producte: 10.31 cm de llargada x 2.52 cm d'amplada x 1.73 cm d'alçada
- Número de model de l'article: QCE-10-40
- Format del senyal: Analògic
- Font d'alimentació: Adaptador
- Voltage: 9 Volts
- Effects Included: Delay, Chorus, Multi Effects, Distortion
Garantia i Suport
SONICAKE products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please visit the official SONICAKE weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
