Introducció
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Gami Bed, Model 1G75111. Please read these instructions carefully before beginning assembly or use to ensure safe and proper functioning of the product.
The Gami Bed is a quality product manufactured in France, designed for easy maintenance and featuring a timeless design. It is suitable for two standard occupants.
Producte acabatview
The Gami Bed is constructed from engineered wood with a Light Kronberg Oak finish. It is designed as a panel bed, providing a stable base for your mattress.
Muntatge i muntatge
Assembly of the Gami Bed is required. The product is shipped in multiple boxes (two or more), which may arrive on different days. Please ensure all packages have been received before beginning assembly.
Abans de començar:
- Desembaleu tots els components i verifiqueu-los amb la llista de peces (normalment inclosa a l'embalatge).
- Ensure you have the necessary tools (e.g., screwdriver, hammer, Allen wrench - typically included or specified).
- Assemble the bed in the room where it will be used, or in a space large enough to accommodate its dimensions (197 cm L x 128 cm W x 80 cm H).
- It is recommended to have at least two people for assembly due to the size and weight of the components.
Passos de muntatge:
Detailed assembly instructions with diagrams are provided within the product packaging. Follow these instructions carefully.
- Identify and separate all components for the headboard, footboard, side rails, and bed slats.
- Fixeu els travessers laterals al capçal i al peu del llit amb els accessoris proporcionats. Assegureu-vos que totes les connexions estiguin ben fixades.
- Install the bed slats or panel base onto the side rails. Ensure they are evenly spaced and securely fastened.
- Once assembled, gently move the bed into its final position.
- Place your mattress onto the assembled bed frame.
For any difficulties during assembly, refer to the manufacturer's contact information provided in the packaging.
Instruccions de funcionament
The Gami Bed is designed for static use as a sleeping surface. No specific "operating" steps are required beyond proper assembly and placement of a suitable mattress.
Directrius d'ús:
- Ensure the bed is placed on a flat, stable surface to prevent wobbling or instability.
- The bed is designed to accommodate two standard occupants. Do not exceed this capacity.
- Avoid jumping on the bed, as this can damage the frame or slats.
- Regularly check all screws and fasteners to ensure they remain tight. Tighten if necessary.
Manteniment
The Gami Bed is designed for easy maintenance to ensure its longevity and appearance.
Neteja:
- Per a la neteja general, netegeu les superfícies amb un drap suau i sec.amp tela.
- Eviteu utilitzar netejadors abrasius, productes químics agressius o dissolvents, ja que poden danyar l'acabat.
- Netegeu immediatament qualsevol vessament per evitar taques o danys per aigua.
Atenció general:
- Keep the bed away from direct sunlight and heat sources to prevent warping or fading of the wood finish.
- Periodically check and tighten all assembly hardware to maintain structural integrity.
- If moving the bed, lift it rather than dragging it to prevent damage to the frame or floor.
Resolució de problemes
This section addresses common issues you might encounter with your Gami Bed.
| Problema | Causa possible | Solució |
|---|---|---|
| El llit sembla inestable o inestable. | Loose assembly hardware. Uneven floor surface. | Tighten all screws and bolts. Ensure the bed is on a level surface; use shims if necessary. |
| Sorolls de grinyols. | Connexions soltes entre els components del marc o les lames. | Tighten all hardware. Apply a small amount of lubricant (e.g., silicone spray) to contact points if squeaking persists. |
| Damage to wood finish. | Impact, scratches, or exposure to harsh chemicals. | For minor scratches, use a wood repair kit or touch-up pen matching the Light Kronberg Oak finish. For significant damage, contact the manufacturer. |
| Peces que falten durant el muntatge. | Error d'embalatge o component perdut. | Check all packaging thoroughly. Contact the manufacturer with your model number (1G75111) and a description of the missing part. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | 1G75111 |
| Marca | GAMI |
| Dimensions (L x A x A) | 197 cm x 128 cm x 80 cm (77.6 polzades x 50.4 polzades x 31.5 polzades) |
| Pes de l'article | 28.2 quilos (62.17 lliures) |
| Color | Light Kronberg Oak |
| Matèria Primera | Fusta d'enginyeria |
| Tipus de fusta | Fusta |
| Capacitat | 2 people (standard) |
| Muntatge obligatori | Sí |
| Contingut del paquet | 1 x Bed frame components |
| Number of Cartons | 2 |
| Fabricant | Gautier França |
| ASIN | B07G2Q5WYY |
| Codi Internacional de l'Article | 03483600849311 |
Garantia i Suport
Information regarding spare parts availability is not directly provided in the product details. For warranty claims, missing parts, or technical support, please contact the manufacturer, Gautier France, or your point of purchase.
Quan contacteu amb el servei d'assistència, tingueu a mà el número de model (1G75111) i ASIN (B07G2Q5WYY) ready for faster assistance.
