1. Introducció
The Performance Tool W3000 Electronic Parking Brake (EPB) Tool is designed to assist automotive technicians and enthusiasts with electronic parking brake system diagnostics and service. This tool provides convenient functions for reading diagnostic trouble codes, accessing data streams, and performing essential maintenance tasks on compatible vehicle models.
This manual provides detailed instructions for the proper setup, operation, and maintenance of your W3000 tool. Please read this manual thoroughly before use to ensure safe and effective operation.
Image 1.1: The Performance Tool W3000 Electronic Parking Brake Tool, showing its compact design and OBD-II connector.
2. Configuració
Before using the W3000 tool, ensure your vehicle's ignition is in the OFF position. The tool is powered directly from the vehicle's OBD-II port.
- Localitzeu el port OBD-II: The OBD-II port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's service manual if you cannot locate it.
- Connecteu l'eina: Firmly insert the W3000's OBD-II connector into the vehicle's OBD-II port. Ensure a secure connection.
- Encès: Once connected, the tool should power on automatically. If not, turn the vehicle's ignition to the ON position (engine off).
- Selecció d'idioma: The tool supports English and Spanish. Navigate the menu to select your preferred language if prompted or if you wish to change it.
3. Instruccions de funcionament
The W3000 tool provides several key functions for electronic parking brake systems. Use the ENTER and EXIT buttons to navigate the menu and confirm selections.
Image 3.1: Diagram illustrating the user-friendly interface, multilingual support, caliper service function, diagnostic code reading, and OBDII connection of the W3000 tool.
3.1. Funcions de diagnòstic
This tool allows you to read and clear diagnostic trouble codes (DTCs), view live data streams, and access ECU information related to the parking brake system.
- Llegir els DTC: Select the 'Read Codes' option from the main menu to display current, pending, and historic trouble codes.
- Esborra els DTC: After addressing any issues, select 'Clear Codes' to erase the stored trouble codes from the vehicle's memory.
- Flux de dades: View real-time data parameters from the EPB system.
3.2. Caliper Service
The W3000 facilitates the opening and closing of electronic parking brake calipers for servicing brake pads, discs, or performing brake fluid changes and bleeding procedures.
- Open Calipers: Select the 'Open Calipers' function to retract the electronic parking brake pistons, allowing for brake component replacement.
- Close Calipers: After servicing, select the 'Close Calipers' function to return the pistons to their operational position.
- Brake Fluid Change/Bleed: The tool can assist in the brake fluid change and bleeding process on compatible Audi, VW, Mercedes, and Volvo vehicles. Follow the on-screen prompts.
3.3. Rear Brake System Reset
After replacing brake discs or pads, it is essential to reset the rear brake system to ensure proper function and calibration.
- Procediment de restabliment: Navigate to the 'Rear Brake Reset' option and follow the instructions displayed on the tool's screen. This will recalibrate the EPB system to the new components.
3.4. Sensotronic Brake Control (SBC)
For vehicles equipped with SBC brake control, the W3000 allows for deactivation and activation of the system for safe maintenance procedures.
- Deactivate SBC: Use this function before performing any work on the brake system to prevent accidental activation.
- Activate SBC: Re-activate the SBC system after all maintenance is complete.
4. Manteniment
Proper care and maintenance will extend the life of your W3000 tool.
- Neteja: Wipe the tool with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Emmagatzematge: Store the tool in a clean, dry environment away from extreme temperatures and direct sunlight.
- Cura del cable: Avoid kinking or sharply bending the OBD-II cable. Inspect the cable and connector for damage before each use.
5. Solució De Problemes
If you encounter issues while using the W3000 tool, refer to the following common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'encén. | Loose OBD-II connection; Vehicle ignition off; Vehicle battery low. | Ensure the OBD-II connector is fully seated. Turn vehicle ignition to ON. Check vehicle battery voltage. |
| "Link Error!" or "Won't Connect" message. | Incompatible vehicle model/year; Faulty OBD-II port; Tool software issue. | Verify your vehicle's make, model, and year against the compatibility list in Section 6. Try connecting to a different compatible vehicle if possible. Ensure the vehicle's ignition is ON. |
| Caliper service/reset function fails. | Incorrect procedure; Vehicle system error; Tool compatibility limitation. | Ensure all steps in the operating instructions are followed precisely. Check for any vehicle-specific requirements. Confirm vehicle compatibility for the specific function. |
6. Specifications and Compatibility
The Performance Tool W3000 is designed for specific vehicle makes and models. Please verify your vehicle's compatibility before use.
Image 6.1: Compatibility chart for the Performance Tool W3000, detailing supported brands, models, and years.
Especificacions generals:
- Model: W3000
- Marca: Eina de rendiment
- Sistema operatiu: Windows XP (internal tool OS, not for user interaction)
- Suport lingüístic: Anglès, espanyol
- Tipus d'ajust per a automòbils: Universal Fit (via OBD-II port)
- Pes de l'article: 8 unces
- Dimensions del producte: 6 x 1.75 x 9.6 polzades
- Fabricant: Wilmar Corporation
- UPC: 039564132162
Compatibilitat de vehicles:
- Audi: A6/A8 (2006 and newer)
- VW: Passat (2005 and newer)
- Mercedes Benz: E211/E219 (up to 2006), S221 (up to 2007)
- Volvo: S80 (2007 and newer), V70 (2008 and newer), XC70 (2010 and newer), XC60 (2010 and newer), S60 (2011 and newer)
7. Garantia i Suport
The Performance Tool W3000 Electronic Parking Brake Tool comes with a 1-Year Limited Warranty. For warranty claims or technical support, please contact Wilmar Corporation, the manufacturer.
For additional information or support, please visit the official Performance Tool weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra a efectes de garantia.
