Producte acabatview
The Everbilt 35mm 110-Degree 3/4 inch Overlay Soft Close Nickel Cabinet Hinge is designed for face frame cabinets, providing a smooth and quiet closing action for cabinet doors. This hinge features a 35mm cup diameter and a 110-degree opening angle, suitable for a 3/4 inch overlay application. The integrated soft-close mechanism helps prevent slamming, protecting your cabinet and reducing noise.
Imatge: De dalt a baix view of the Everbilt 35mm 110-Degree Soft Close Nickel Cabinet Hinge, showcasinel seu disseny i components.
Què s'inclou
- Everbilt 35mm 110-Degree 3/4 inch Overlay Soft Close Nickel Cabinet Hinge (2 Pieces)
- Cargols de muntatge
Image: Two Everbilt cabinet hinges and accompanying mounting screws, laid out on a white background.
Configuració i instal·lació
Proper installation is key to the performance of your Everbilt cabinet hinges. Follow these steps carefully.
Eines necessàries:
- Tornavís Phillips
- Drill (optional, for pilot holes)
- Regla o cinta mètrica
- Llapis
Passos d'instal·lació:
- Prepare the Cabinet Door: If installing on a new door, use a 35mm Forstner bit to drill the hinge cup holes on the inside of the cabinet door. Ensure the holes are drilled to the correct depth and position for a 3/4 inch overlay.
- Fixeu les frontisses a la porta: Place the hinge cups into the drilled holes on the cabinet door. Secure the hinges to the door using the provided smaller screws. Ensure the hinges are flush and aligned.
- Position the Door on the Cabinet Frame: Hold the cabinet door in its closed position against the face frame of the cabinet. Align the door so that it has the desired overlay and gaps around the edges.
- Marqueu els forats de muntatge: With the door held in place, use a pencil to mark the screw hole locations on the cabinet face frame through the hinge mounting plates.
- Secure Hinges to Cabinet: Remove the door. Drill small pilot holes at the marked locations on the cabinet face frame (optional, but recommended to prevent wood splitting). Re-position the door and secure the hinge mounting plates to the cabinet face frame using the provided larger screws.
- Adjust the Door: Most hinges allow for minor adjustments to achieve perfect door alignment.
- Ajust de costat a costat: Use the screw closest to the cabinet frame to move the door left or right.
- Ajust de profunditat: Use the screw further from the cabinet frame to move the door in or out.
- Ajust d'alçada: Some hinges allow for vertical adjustment by loosening the mounting screws, adjusting the door, and re-tightening.
Image: An Everbilt cabinet hinge installed on a wooden cabinet, showing how it connects the door to the face frame.
Operating the Soft-Close Feature
The Everbilt 35mm 110-Degree Hinge features an integrated soft-close mechanism. This mechanism automatically engages as the cabinet door approaches the closed position, gently pulling it shut without a slam. No external devices are needed for this function.
Image: A graphic with the text "STOP THE SLAM!" overlaid on a cabinet door, illustrating the benefit of the soft-close feature.
Manteniment
Everbilt cabinet hinges are designed for durability and require minimal maintenance.
- Neteja: Netegeu les frontisses periòdicament amb un drap suauamp cloth to remove dust and grime. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Lubricació: The soft-close mechanism is factory-lubricated and generally does not require additional lubrication. If the hinge action becomes stiff over time, a small amount of silicone-based lubricant can be applied to the pivot points, but avoid spraying directly into the soft-close mechanism.
- Cargols de tensió: Periodically check all mounting screws and tighten them if they have become loose. Do not overtighten.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Door does not close fully or is misaligned. | Loose mounting screws; incorrect hinge adjustment. | Tighten all mounting screws. Adjust the hinge screws (side-to-side, depth, and height) as described in the "Setup and Installation" section until the door is properly aligned. |
| Soft-close feature is not working or is inconsistent. | Obstruction; hinge damage; excessive weight on door. | Check for any obstructions preventing the door from closing smoothly. Ensure the hinge is not damaged. If the door is excessively heavy, consider adding an additional hinge for support. |
| Hinge squeaks or feels stiff. | Lack of lubrication; dirt buildup. | Clean the hinge thoroughly. Apply a small amount of silicone-based lubricant to the pivot points. |
Especificacions
- Marca: Everbilt
- Número de model: H70300E-NP-CP
- Dimensions del producte: 0.75"L x 0.75"W (0.75 x 0.75 x 0.04 inches; 1 Pounds)
- Tipus de frontissa: Face Frame, 3/4 inch Overlay
- Angle d'obertura: 110-Grau
- Diàmetre de la copa: 35 mm
- Característica: Tancament suau
- Tipus d'acabat: Unfinished (Nickel)
- Tipus de muntatge: Muntatge frontal
- Recompte de forats: 2
- Recompte d'unitats: 1.0 Count (per pair)
- UPC: 885785838679
- Data de primera disponibilitat: 3 d'agost de 2019
Garantia i Suport
For information regarding product warranty, returns, or technical support, please refer to the official Everbilt weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.
Sovint podeu trobar informació de suport a la pàgina oficial del fabricant weblloc: www.everbilt.com
