Manual d'usuari de l'estació de treball HP Z2 G4

1. Introducció

This manual provides essential information for setting up, operating, maintaining, and troubleshooting your HP Z2 G4 Mini-Tower Workstation. Please read this guide thoroughly before using your workstation to ensure optimal performance and longevity.

The HP Z2 G4 Workstation is designed for demanding professional applications, featuring an Intel Core i7 (8th Gen) i7-8700 Hexa-core processor, 16 GB DDR4 SDRAM, and a 256 GB SSD, running on Windows 10 Pro. Its robust design and powerful components make it suitable for intensive workloads.

Figure 1: HP Z2 G4 Workstation (Angled Front-Left View)

2. Configuració

2.1 Desembalatge

Carefully remove the workstation and all accessories from the packaging. Ensure all components listed below are present:

• HP Z2 G4 Workstation
• Cable d'alimentació
• Keyboard (as per package contents)
• Documentació (aquest manual, informació de garantia)

2.2 Connexió de perifèrics

Abans d'encendre el dispositiu, connecteu els perifèrics essencials:

1. Connecteu el monitor: Use a DisplayPort cable to connect your monitor to the DisplayPort output on the rear of the workstation.
2. Connecteu el teclat i el ratolí: Plug your USB keyboard and mouse into any available USB ports on the front or rear panel.
3. Connectar-se a la xarxa (opcional): For wired network access, connect an Ethernet cable from your router or network switch to the Gigabit Ethernet port on the rear panel.
4. Connectar l'alimentació: Plug the power cable into the workstation's power input and then into a grounded electrical outlet.

Figure 2: Rear Panel Connections (DisplayPort, USB, Ethernet)

Figure 3: Front Panel Connections (Power Button, USB Ports, Card Reader)

2.3 Encès inicial

Press the power button located on the front panel of the workstation. The system will boot up, and you may be guided through the initial Windows 10 Pro setup process. Follow the on-screen instructions to configure your operating system settings, user accounts, and network preferences.

3. Funcionament de l'estació de treball

3.1 Engegar/apagar i reiniciar

• Encès: Premeu el botó d'engegada del panell frontal.
• Apagar: A Windows, feu clic al botó Inici, després a Engegada i seleccioneu "Apagar".
• Reinicia: A Windows, feu clic al botó Inici, després a Engegada i seleccioneu "Reinicia".
• Forçar l'aturada: If the system is unresponsive, press and hold the power button for approximately 5-10 seconds until the workstation powers off. Use this only as a last resort.

3.2 Ús dels ports USB

The workstation features multiple USB 2.0 and USB 3.0 ports for connecting various devices such as external hard drives, printers, and other peripherals. USB 3.0 ports (often blue or marked with "SS") offer faster data transfer speeds.

3.3 Optical Drive (If Installed)

If your model includes an optical drive, press the eject button on the drive bezel to open the tray for inserting CDs or DVDs.

4. Manteniment

4.1 Neteja

• Exterior: Utilitzeu un drap suau i sense pelusa lleugerament dampEsbandiu amb aigua o una solució de neteja suau. Eviteu productes químics agressius.
• Reixes de ventilació: Periodically clean dust from the ventilation grilles using compressed air to ensure proper airflow and prevent overheating. Ensure the workstation is powered off before cleaning.

4.2 Actualitzacions de programari

Regularly update your Windows operating system and drivers to ensure system stability, security, and optimal performance. Windows Update can be accessed via the Settings menu.

4.3 Còpia de seguretat de dades

It is highly recommended to regularly back up your important data to an external drive or cloud storage to prevent data loss.

5. Solució De Problemes

Aquesta secció tracta els problemes habituals que podeu trobar amb la vostra estació de treball HP Z2 G4.

5.1 Sense poder

• Assegureu-vos que el cable d'alimentació estigui connectat correctament tant a l'estació de treball com a la presa de corrent.
• Verifiqueu que la presa de corrent funciona connectant-hi un altre dispositiu.
• Check the power supply unit (PSU) switch on the rear of the workstation, if present, to ensure it is in the 'ON' position.

5.2 No es mostra cap imatge al monitor

• Confirm the monitor is powered on and its video cable is securely connected to the workstation's DisplayPort.
• Try connecting the monitor to a different video output on the workstation, if available.
• Test the monitor with another computer or device to rule out a monitor issue.

5.3 El sistema és lent o no respon

• Tanca les aplicacions innecessàries que s'executen en segon pla.
• Check Task Manager (Ctrl+Shift+Esc) for processes consuming excessive CPU or memory.
• Assegureu-vos que el vostre sistema operatiu i els controladors estiguin actualitzats.
• Executeu una anàlisi del sistema per detectar programari maliciós o virus.
• Consider restarting the workstation.

5.4 Perifèric no detectat

• Assegureu-vos que el perifèric estigui connectat correctament a un port USB funcional.
• Prova de connectar el perifèric a un port USB diferent.
• Reinicieu l'estació de treball.
• Install or update drivers for the peripheral if necessary.

6. Especificacions

Below are the detailed technical specifications for the HP Z2 G4 Workstation (Model: 5DU96UT).

7. Garantia i Suport

Your HP Z2 G4 Workstation comes with a standard manufacturer's warranty. Please refer to the warranty documentation included with your product for specific terms and conditions.

Per obtenir assistència tècnica, descàrregues de controladors i recursos addicionals, visiteu el lloc web oficial d'assistència d'HP. weblloc:

https://support.hp.com

When contacting support, please have your product model (Z2 G4) and serial number ready. The serial number is typically located on a label on the rear or side of the workstation.