Introducció
This manual provides essential information for the safe and effective use of the Zoll Power Supply and Power Cord, designed specifically for Zoll Impact 731 Ventilators.
El paquet inclou:
- Zoll Power Supply (Part Number: 708-0042-00)
- Zoll Power Cord (Part Number: 024-0012-00)
Figura 1: The Zoll Power Supply and Power Cord. This image shows the black rectangular power supply unit connected to a power cord with a standard 3-prong plug on one end and a specialized 2-pin connector on the other, designed for the Zoll Impact 731 Ventilator.
Configuració i instal·lació
Follow these steps to properly set up your Zoll Power Supply and Power Cord:
- Desempaquetar components: Carefully remove the power supply unit and power cord from their packaging. Inspect both items for any visible damage. Do not use if damaged.
- Connect Power Cord to Supply: Insert the standard 3-prong end of the power cord into a compatible wall outlet. Connect the other end of the power cord to the input port on the Zoll Power Supply unit. Ensure a secure connection.
- Connect Power Supply to Ventilator: Locate the power input port on your Zoll Impact 731 Ventilator. Connect the 2-pin connector from the Zoll Power Supply to this port. Ensure the connection is firm and fully seated.
- Verifica la connexió: Once all connections are made, ensure that the power supply unit is placed on a stable, flat surface, away from excessive heat or moisture.
Important: Always ensure the ventilator is turned off before connecting or disconnecting the power supply.
Instruccions de funcionament
The Zoll Power Supply and Power Cord are designed for continuous operation with the Zoll Impact 731 Ventilator. Once properly connected, the power supply will provide the necessary electrical current to operate and charge the ventilator.
- Encès: After connecting the power supply, turn on your Zoll Impact 731 Ventilator according to its specific operating instructions.
- Indicador d'alimentació: The power supply unit may have an indicator light to show that it is receiving power and functioning correctly. Refer to the ventilator's manual for specific power status indicators.
- Desconnexió: To disconnect, first power off the ventilator, then unplug the power cord from the wall outlet, and finally disconnect the 2-pin connector from the ventilator.
Manteniment i cura
Proper maintenance ensures the longevity and reliable performance of your power supply:
- Neteja: Clean the exterior of the power supply and cords with a soft, dry cloth. Do not use liquid cleaners or abrasive materials. Ensure the unit is unplugged before cleaning.
- Emmagatzematge: When not in use, store the power supply and cord in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the cords loosely to prevent kinking or damage.
- Inspecció: Periodically inspect the power cord and connectors for any signs of wear, fraying, or damage. If any damage is observed, discontinue use immediately and replace the unit.
- Ventilació: Ensure the power supply unit has adequate ventilation during operation to prevent overheating. Do not cover the unit.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No power to ventilator | Power cord not fully plugged in; Wall outlet not active; Faulty power supply/cord. | Ensure all connections are secure. Test the wall outlet with another device. If issues persist, the power supply or cord may need replacement. |
| Power supply unit is hot | Normal operation (slight warmth); Poor ventilation; Overload. | Ensure adequate airflow around the unit. If excessively hot, disconnect and contact support. |
| Ventilator not charging | Power supply not providing sufficient power; Ventilator battery issue. | Verify the power supply is correctly connected. Refer to the Zoll Impact 731 Ventilator manual for battery troubleshooting. |
Especificacions
- Número de model: 710-0731-01
- Components inclosos: Zoll Power Supply (708-0042-00), Zoll Power Cord (024-0012-00)
- Dispositius compatibles: Zoll Impact 731 Ventilators
- Vol. De sortidatage: 24 volts (CC)
- Tipus de connector: 2-pins
- Color: Negre
- Fabricant: Zoll
- Especificació complerta: UL
- Data de primera disponibilitat: 17 d'agost de 2018
Informació de la garantia
Specific warranty details for the Zoll Power Supply and Power Cord (Part Number: 710-0731-01) are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the official Zoll website or contact Zoll customer support directly.
Atenció al client
For technical assistance, product inquiries, or to report issues, please contact Zoll customer support:
- Marca: Zoll
- Fabricant: Zoll
- Weblloc: www.zoll.com
- Número de model: 710-0731-01
When contacting support, please have your product model number (710-0731-01) and any relevant purchase information ready.
