Introducció
The Darkglass Hyper Luminal Bass Compressor Pedal is a state-of-the-art hybrid compressor designed for bass guitarists. It combines an analog VCA with a digital side-chain, allowing it to emulate the characteristics of legendary compressors while maintaining a pure analog signal path. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Hyper Luminal pedal.
Producte acabatview
Figura 1: superior view of the Hyper Luminal pedal, highlighting its primary controls and indicators.
Figura 2: lateral view of the pedal, illustrating the micro-USB port for connectivity.
Característiques principals:
- Disseny híbrid: Analog VCA with digital side-chain for versatile compression.
- Three Compression Modes: BUS (SSL Bus compressor emulation), FET (1176 emulation), and SYM (Super Symmetry emulation).
- Blend Control: Mixes clean and compressed signals for transparent results.
- Control de temps: Adjusts attack and release settings for dynamic response.
- Control de compressió: Sets the amount of compression applied.
- Ratio Control: Adjustable compression ratio from 2:1 to 20:1 via touch sensor.
- Mesurador de reducció de guany: 10-segment LED meter for visual feedback.
- Interfície USB: For firmware updates and Darkglass Suite software integration.
- Disseny compacte: Lightweight and pedalboard-friendly.
Configuració
Requisits d'alimentació:
The Hyper Luminal pedal requires a 9V DC power supply (center negative). Ensure the power supply provides sufficient current for stable operation. The pedal does not operate on internal batteries.
Connexions:
- Connect your instrument (bass guitar) to the ENTRADA jack on the right side of the pedal.
- Connecteu el SORTIDA presa al costat esquerre del pedal al vostre amplifier or next pedal in the signal chain.
- Connect a 9V DC power supply to the 9VDC entrada.
- (Optional) Connect a micro-USB cable from the pedal's USB port to your computer for firmware updates and Darkglass Suite software integration.
Figure 3: Input, Output, and Power connections.
Funcionament del pedal
Controls:
- Mescla: Controls the mix between the clean (uncompressed) signal and the compressed signal. Turn clockwise for more compressed signal, counter-clockwise for more clean signal.
- Hora: Adjusts the attack and release characteristics of the compressor. This control dynamically adapts based on the selected compression mode.
- Sortida: Sets the overall output volume of the pedal.
- Compressió: Determines the amount of gain reduction applied. Turn clockwise for more compression.
- Ratio (Touch Sensor): Tap this sensor to cycle through different compression ratios. The available ratios depend on the selected compression mode.
- Mode (Touch Sensor): Tap this sensor to select one of the three compression modes: BUS, FET, or SYM.
Compression Modes:
- AUTOBÚS: Modeled after the classic SSL Bus compressor, known for its transparent and glue-like compression.
- FET: Inspired by the iconic 1176 compressor, offering fast attack and release times with a distinct character. This mode also supports the "all-button" or "British" mode by tapping the Ratio sensor four times until all four LEDs are lit.
- SYM: Based on Darkglass's own Super Symmetry compressor, providing a unique and modern compression feel.
Mesurador de reducció de guany:
The 10-segment LED meter visually indicates the amount of gain reduction occurring. More LEDs lit signifies greater compression.
Darkglass Suite Software:
Connect the pedal to your computer via the micro-USB port to access the Darkglass Suite software. This software allows for firmware updates and advanced configuration of the pedal's parameters, including custom compression settings and future model additions.
Manteniment
- Keep the pedal clean by wiping it with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Guardeu el pedal en un lloc sec, allunyat de temperatures i humitat extremes.
- Ensure all cable connections are secure to prevent signal loss or damage.
- Regularly check for firmware updates via the Darkglass Suite software to ensure optimal performance and access to new features.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No sound from pedal. | Incorrect power supply; incorrect cable connections; faulty cables. | Verify 9V DC center-negative power supply is connected and functioning. Check input/output cable connections. Test with different cables. |
| Pedal not compressing signal. | Compression knob set too low; incorrect mode/ratio selected; low input signal. | Augmentar el Compressió knob setting. Experiment with different Mode i Ratio settings. Ensure adequate input signal from your instrument. |
| Soroll o xiuxiueig no desitjat. | High gain settings; ground loop; faulty power supply. | Reduir Sortida or Compressió settings. Use a high-quality, isolated power supply. Check for ground loop issues in your setup. |
| Problemes de connexió USB. | Incorrect USB cable; driver issues; Darkglass Suite software not running. | Ensure you are using a standard micro-USB data cable. Install necessary drivers. Launch Darkglass Suite software before connecting. |
Especificacions
- Model: HYL (Hyper Luminal)
- Dimensions (L x A x A): Aproximadament 10 x 7 x 5 polzades
- Pes: 8.1 unces (230 grams)
- Requisit d'energia: 9V DC (center negative), 100mA minimum (Alkaline battery not applicable for operation, external power required)
- Format del senyal: Analògic
- Interfície de maquinari: USB (Micro-USB)
- Color: Plata
Garantia i Suport
For warranty information and technical support, please refer to the official Darkglass Electronics weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
Darkglass Electronics Official Weblloc: www.darkglass.com
