1. Introducció
Thank you for choosing the Pulsar PZ5063X1 Solar Chronograph Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new timepiece. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.
2. Producte acabatview
The Pulsar PZ5063X1 is a solar-powered chronograph watch featuring a black stainless-steel case, a black leather strap, and a black dial. It is designed for reliability and functionality, offering water resistance up to 100 meters.
Image 1: Pulsar PZ5063X1 Solar Chronograph Watch. This image displays the watch face, highlighting the black dial with luminous hour markers and hands. The dial features three sub-dials: a 24-hour indicator at 3 o'clock, a minute counter for the chronograph at 9 o'clock, and a small seconds hand for the chronograph at 6 o'clock. The main seconds hand is red. A date window is visible at 4 o'clock. The watch has a black stainless-steel case and a black leather strap. The bezel is marked with numbers 10, 20, 30, 40, 50, 60.
Característiques principals:
- Moviment solar: Powered by light, eliminating the need for battery replacement.
- Funció de cronògraf: Measures elapsed time with precision.
- Resistència a l'aigua: 100 meters (10 ATM), suitable for swimming and snorkeling.
- Construcció duradora: Black stainless-steel case and scratch-resistant crystal.
- Corretja còmoda: Black leather strap with a secure buckle closure.
- Visualització de la data: Finestra de data pràctica a l'esfera.
3. Configuració
3.1 Càrrega inicial
Your Pulsar Solar watch is powered by light. Before initial use, expose the watch dial to a strong light source (natural sunlight is ideal) for several hours to ensure it is fully charged. Avoid placing the watch in direct sunlight for extended periods in extremely hot environments to prevent damage.
- Place the watch where the dial is exposed to light.
- A full charge can take approximately 8 hours in direct sunlight or significantly longer under artificial light.
- The power reserve indicator (if present, often marked H-L or similar) will show the charge level. Ensure it is at 'H' (High) for optimal performance.
3.2 Configuració de l'hora i la data
- Traieu la corona: Gently pull the crown (the knob on the side of the watch) to the second click position. The second hand will stop.
- Estableix l'hora: Rotate the crown to set the hour and minute hands. Pay attention to the 24-hour sub-dial to ensure AM/PM is correctly set for the date change.
- Estableix la data: Push the crown back to the first click position. Rotate the crown to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can interfere with the date change mechanism.
- Empenyeu la corona: Once the time and date are set, push the crown back into its normal position. The second hand will resume movement.
3.3 Ajust de la corretja
The black leather strap is designed for comfort. To adjust the fit, locate the buckle and select the appropriate hole that allows the watch to sit snugly but comfortably on your wrist. Ensure the watch is not too tight, which can restrict circulation, or too loose, which can cause it to move excessively.
4. Instruccions de funcionament
4.1 Cronometratge bàsic
Once set, your Pulsar watch will accurately display the current time and date. The main hour and minute hands indicate the current time, while the small second hand (red, at 6 o'clock) functions as the chronograph second hand. The 24-hour sub-dial (at 3 o'clock) provides a 24-hour format display of the current time.
4.2 Ús del cronògraf
The chronograph function allows you to measure elapsed time. The watch features two pushers on the side, typically located at 2 o'clock and 4 o'clock positions relative to the crown.
- Inici: Press the upper pusher (A) to start the chronograph. The red second hand (at 6 o'clock) will begin to move, and the minute counter (at 9 o'clock) will track elapsed minutes.
- Atura: Press the upper pusher (A) again to stop the chronograph. The elapsed time will be indicated by the red second hand and the minute counter.
- Restablir: After stopping, press the lower pusher (B) to reset the chronograph. All chronograph hands will return to their zero positions.
- Temps parcial (si escau): Some chronographs allow for split time measurement. Refer to the detailed movement instructions if your specific model supports this.
4.3 Resistència a l'aigua
This watch is water resistant up to 100 meters (10 ATM). This means it is suitable for everyday use, swimming, and snorkeling. It is no suitable for scuba diving. Always ensure the crown is fully pushed in before exposing the watch to water. Do not operate the pushers or crown while the watch is wet or submerged.
5. Manteniment
5.1 Neteja del rellotge
To maintain the appearance of your watch, wipe the case and crystal with a soft, dry cloth. For the leather strap, avoid excessive moisture and harsh chemicals. If the watch becomes dirty, especially after exposure to saltwater, rinse it gently with fresh water and dry thoroughly with a soft cloth.
5.2 Solar Charging Best Practices
- Regularly expose your watch to light to keep it charged.
- Avoid prolonged storage in dark places, as this can deplete the power reserve.
- If the watch stops due to insufficient charge, expose it to light immediately. It may take some time for the hands to resume normal movement.
5.3 Cura de la corretja
Leather straps are susceptible to wear and tear from moisture, sweat, and direct sunlight. To prolong the life of your leather strap:
- Eviteu l'exposició prolongada a l'aigua.
- Netejar amb anunciamp drap i sabó suau si cal, i després assequeu-ho bé.
- Condition the leather periodically with a suitable leather conditioner.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El rellotge s'ha aturat o va lent. | Càrrega insuficient. | Expose the watch dial to a strong light source for several hours to recharge. |
| L'hora o la data són incorrectes. | Time/date not set correctly or crown is not fully pushed in. | Refer to Section 3.2 "Setting Time and Date" to reset. Ensure the crown is fully pushed in. |
| Les agulles del cronògraf no es reinicien a zero. | Chronograph reset not performed or hands are misaligned. | Press the lower pusher (B) to reset. If misalignment persists, consult a service center. |
| Moisture inside the watch. | Crown not fully pushed in when exposed to water, or seals are compromised. | Porteu immediatament el rellotge a un centre de servei autoritzat. No intenteu obrir el rellotge vosaltres mateixos. |
7. Especificacions
- Número de model: PZ5063X1
- Moviment: Solar Quartz
- Material de la caixa: Acer inoxidable negre
- Diàmetre de la caixa: 44 mm
- Material de la corretja: Pell negre
- Color de l'esfera: Negre
- Resistència a l'aigua: 100 metres (10 ATM)
- Funcions: Time (Hour, Minute, 24-hour sub-dial), Date, Chronograph (60-second, 60-minute sub-dials)
- Dimensions del producte: 20 x 20 x 20 cm
- Pes: 300 g
- Fabricant: Púlsar
8. Garantia i Suport
8.1 Informació de la garantia
Your Pulsar watch is covered by a manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary by region. Please refer to the warranty card included with your purchase or visit the official Pulsar weblloc per obtenir informació detallada sobre la garantia.
8.2 Atenció al client
For technical assistance, service, or repair inquiries, please contact an authorized Pulsar service center. Contact information can typically be found on the Pulsar official website or through your retailer. When contacting support, please have your watch model number (PZ5063X1) and purchase details readily available.
