1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of the Yealink Wall Mount Bracket, designed specifically for Yealink SIP-T27G and SIP-T29G IP phones. Please read this manual thoroughly before installation to ensure proper and safe use of the product.
2. Informació de seguretat
- Always ensure the mounting surface is strong enough to support the weight of the bracket and the phone.
- Use appropriate tools and hardware for installation. If unsure, consult a qualified professional.
- Mantingueu les peces petites allunyades dels nens per evitar perills d'asfixia.
- Do not overtighten screws, as this may damage the bracket or the mounting surface.
- Ensure all cables are routed safely to prevent tripping hazards or damage.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- Yealink Wall Mount Bracket (1)
- Mounting Screws (e.g., 2-4 screws, depending on design)
- Wall Anchors (if applicable, for drywall installation)
- Guia d'inici ràpid (1)
Imatge 1: Ex.ample of Yealink Wall Mount Bracket and included hardware.
4. Configuració i instal·lació
Follow these steps to install the wall mount bracket and secure your IP phone.
4.1 Eines necessàries
- Llapis
- Trepant
- Drill bit (appropriate size for anchors/screws)
- Tornavís (es recomana el de capçal Phillips)
- Nivell (opcional, per a una alineació precisa)
4.2 Passos d'instal·lació
- Trieu una ubicació: Select a suitable wall location that is structurally sound and allows for easy access to power and network cables. Ensure the height is convenient for phone use.
- Marca els punts de perforació: Hold the wall mount bracket against the wall at the desired height and use a pencil to mark the positions for the mounting screws. Use a level to ensure the bracket is straight.
- Perforar forats pilot: Using the appropriate drill bit, drill pilot holes at the marked locations. If installing into drywall, insert wall anchors into the pilot holes until flush with the wall surface.
- Assegureu el suport: Align the bracket with the drilled holes (or anchors) and insert the mounting screws. Tighten the screws firmly with a screwdriver until the bracket is securely fastened to the wall. Do not overtighten.
- Connecteu el telèfon: Carefully slide your Yealink SIP-T27G or SIP-T29G IP phone onto the bracket. Ensure it clicks into place or is otherwise securely seated according to the bracket's design.
- Connectar els cables: Route the power and network cables to the phone, ensuring they are not strained or pinched.
5. Instruccions de funcionament
Once installed, the Yealink Wall Mount Bracket provides a stable platform for your IP phone.
- Col·locació del telèfon: Gently align the phone's mounting slots with the bracket's tabs and slide it downwards until it locks into position.
- Eliminació del telèfon: To remove the phone, lift it slightly and slide it upwards to disengage it from the bracket. Exercise caution to avoid dropping the phone.
- Ajustaments: If the bracket offers any adjustable features (e.g., tilt), refer to the specific instructions provided with your bracket model for adjustment procedures.
6. Manteniment
Regular maintenance ensures the longevity and proper function of your wall mount bracket.
- Neteja: Wipe the bracket with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which may damage the finish.
- Inspecció: Periodically check all mounting screws to ensure they remain tight. Inspect the bracket for any signs of wear or damage. If damage is observed, replace the bracket immediately.
7. Solució De Problemes
If you encounter issues with your wall mount bracket, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Bracket feels loose on the wall. | Screws are not tight enough, or wall anchors are not properly seated. | Tighten screws. If still loose, consider using larger anchors or relocating to a stud. |
| Phone does not fit or is unstable on the bracket. | Incorrect phone model for the bracket, or phone not properly engaged. | Ensure your phone is a Yealink SIP-T27G or SIP-T29G. Re-seat the phone carefully. |
| Cables are difficult to manage. | Cables are too short or not routed efficiently. | Use longer cables if necessary. Utilize cable ties or clips to organize cables neatly. |
8. Especificacions
- Marca: Yealink
- Models de telèfon compatibles: SIP-T27G, SIP-T29G
- Tipus de muntatge: Muntatge de paret
- Color: Negre
- Pes de l'article: 3.41 unces (aproximadament 96.67 grams)
- Dimensions del paquet: 8.07 x 6.5 x 2.2 polzades (aprox. 20.5 x 16.5 x 5.6 cm)
- Característiques especials: Ajustable
- ASIN: B07H6T41CC
- Fabricant: Yealink
9. Garantia i Suport
For warranty information and technical support, please refer to the official Yealink weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra per a reclamacions de garantia.
Yealink Official Weblloc: www.yealink.com
