Introducció
The ARCTIC P12 PWM PST is a 120mm case fan designed for efficient and quiet computer cooling. This fan is optimized for static pressure, making it ideal for use on heatsinks and radiators, as well as for general case ventilation. Featuring PWM Sharing Technology (PST), it allows for synchronized control of multiple fans, ensuring optimal performance and reduced noise levels across a wide RPM range.
Image: The ARCTIC P12 PWM PST 120mm case fan, showcasing el seu elegant disseny negre.
Característiques clau
- Optimized for Static Pressure: Engineered to deliver a focused airstream, providing high static pressure crucial for effective cooling through dense fins.
- PWM Sharing Technology (PST): Allows the fan speed to be regulated via PWM, enabling multiple fans to be daisy-chained and controlled synchronously from a single motherboard header.
- Wide RPM Range: Operates between 200 to 1800 RPM, with a 0 RPM mode for silent operation under low loads.
- Efficient Motor Technology: Powered by a Neodym-Iron-Boron-Magnet ring, ensuring high efficiency and reduced power consumption.
- Vida útil ampliada: Designed with a low coil temperature, contributing to a significantly longer service life.
- Baixa vibració: The newly developed ARCTIC motor minimizes vibrations, contributing to quieter operation.
Image: Diagram illustrating the fan's optimized design for static pressure, showing a focused airflow.
Image: Visual representation of the fan's 0dB mode, where the fan stops spinning below 5% PWM for absolute silence.
Configuració i instal·lació
Contingut del paquet
- ARCTIC P12 PWM PST Fan(s)
- Cargols de muntatge
- QR Code for Digital Manual (on packaging)
Image: The product packaging for the ARCTIC P12 PWM PST, featuring a QR code for accessing the digital manual and product information.
Passos d'instal·lació
- Identify the desired mounting location within your PC case (e.g., front intake, rear exhaust, radiator).
- Secure the fan to the case or radiator using the provided mounting screws. Ensure the fan's airflow direction is correct for your cooling setup.
- Connect the fan's 4-pin PWM connector to an available fan header on your motherboard.
- If installing multiple fans, utilize the PWM Sharing Technology (PST) by daisy-chaining the fans. Connect the main fan to the motherboard, then connect subsequent fans to the PST connector of the previous fan. This allows all connected fans to be controlled by a single motherboard header.
Image: Diagram illustrating the PWM Sharing Technology (PST) connectors, allowing multiple fans to be daisy-chained for synchronized control.
Image: Diagram showing recommended fan installation for optimal airflow within a PC case, indicating intake and exhaust configurations.
Guia de vídeo d'instal·lació
Vídeo: Un overview of the ARCTIC P12 Series fan, demonstrating its design and the PWM PST connector for easy setup.
Vídeo: Una revisió completaview of the ARCTIC P12 PWM PST, including insights into its installation, performance, and noise levels in a PC build.
Instruccions de funcionament
Control PWM
The ARCTIC P12 PWM PST fan's speed is controlled via a 4-pin PWM signal from your motherboard. This allows for dynamic adjustment of fan speed based on system temperature, ensuring efficient cooling when needed and quiet operation during lighter loads. The fan supports a wide RPM range from 200 to 1800 RPM, and can even enter a 0 RPM mode (below 5% PWM) for absolute silence when cooling demands are minimal.
Direcció del flux d'aire
Ensure the fan is oriented correctly to achieve the desired airflow within your PC case. Typically, the side with the ARCTIC logo on the hub is the intake side, and air flows towards the side with the support struts.
Manteniment
The ARCTIC P12 PWM PST is designed for long-term reliability with minimal maintenance. Its high-quality fluid dynamic bearing and low coil temperature contribute to an extended lifespan. Periodically, inspect the fan blades for dust accumulation and gently clean them with a soft brush or compressed air to maintain optimal airflow and performance.
Image: Cross-section diagram of the fan's fluid dynamic bearing, highlighting the components that contribute to its extended lifespan and smooth operation.
Resolució de problemes
If you encounter issues with your ARCTIC P12 PWM PST fan, consider the following:
- El ventilador no gira: Check if the 4-pin PWM connector is securely attached to the motherboard header. Ensure the motherboard's BIOS/UEFI settings are configured to supply power to the fan header.
- Soroll excessiu: Verify that the fan is securely mounted and not vibrating against the case. Check for any obstructions to the fan blades. Adjust fan curves in your motherboard's software or BIOS to reduce RPMs at lower temperatures.
- Rendiment de refrigeració deficient: Confirm correct fan orientation for optimal airflow (intake/exhaust). Ensure no dust buildup on fan blades or radiator fins.
Especificacions tècniques
| Especificació | Valor |
|---|---|
| Velocitat del ventilador | 200–1800 rpm (0 rpm <5 %) |
| Flux d'aire | 56.30 cfm | 95.65 m³/h |
| Nivell de soroll | 0.3 Sone |
| Pressió estàtica | 2.20 mm H₂O |
| Tipus de connector d'alimentació | PWM de 4 pins |
| Voltage | 12 volts (CC) |
| Wattage | 1.2 watts |
| Dimensions del producte | 4.72 cm de llargada x 4.72 cm d'amplada x 0.98 cm d'alçada |
| Pes de l'article | 5.1 unces |
| Material | Plom |
| Dispositius compatibles | Escriptori |
Garantia i Suport
The ARCTIC P12 PWM PST comes with an extended 10-year warranty, reflecting its robust design and durability. For detailed warranty information, technical support, or to access the latest digital manual, please visit the official ARCTIC product page:
http://www.arctic.ac/p12pwmpst
You can also find additional support and product information on the ARCTIC weblloc.
