Custom Dynamics PB-45-C

Custom Dynamics PB-45-C Probeam LED Passing Lamps Manual d'usuari

Model: PB-45-C

1. Introducció

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Custom Dynamics PB-45-C 4.5in. Probeam LED Passing Lamps. These modern LED passing lamps are designed to enhance visibility and safety for your motorcycle.

2. Producte acabatview

The Custom Dynamics PB-45-C Probeam LED Passing Lamps feature a modern design with high lumen output for superior illumination. They are engineered for plug-and-play installation on most models.

Característiques principals:

Two Custom Dynamics PB-45-C Probeam LED Passing Lamps with chrome finish

Figure 2.1: Custom Dynamics PB-45-C Probeam LED Passing Lamps. Aquests lamps feature a sleek, round design with a chrome finish and clear lens, showcasing the internal LED components.

3. Informació de seguretat

ADVERTIMENT: Aquest producte us pot exposar a substàncies químiques, com ara el plom, que l'estat de Califòrnia sap que causa càncer i defectes de naixement o altres danys reproductius. Per a més informació aneu a www.P65Warnings.ca.gov.

Always ensure the vehicle's power is disconnected before installation. Consult a qualified technician if you are unsure about any installation steps. Wear appropriate safety gear during installation.

4. Configuració i instal·lació

The PB-45-C lamps are designed for plug-and-play installation. Follow these general steps for installation:

  1. Ensure the motorcycle's ignition is off and the battery is disconnected to prevent electrical shorts.
  2. Carefully remove the existing passing lamps from your motorcycle, if applicable.
  3. Connect the Custom Dynamics PB-45-C lamps to the motorcycle's wiring harness. For models manufactured before 2004, an adapter (part number 2001-1266) is required and sold separately.
  4. Securely mount the new LED passing lamps in the designated locations.
  5. Reconnect the battery and test the functionality of the new lamps.
  6. Ajusteu la lamp angle for optimal beam pattern and visibility.

For detailed vehicle-specific instructions, refer to your motorcycle's service manual.

5. Funcionament

Once installed, the Probeam LED Passing Lamps operate in conjunction with your motorcycle's existing lighting system. They are designed to provide additional forward and side illumination, enhancing your visibility to other road users and improving your view de la carretera.

6. Manteniment

The Custom Dynamics PB-45-C LED Passing Lamps require minimal maintenance due to their durable LED technology and waterproof design.

7. Solució De Problemes

ProblemaCausa possibleSolució
Lamps do not illuminateLoose connection, blown fuse, incorrect wiring, or adapter needed.Check all connections, inspect vehicle's fuse box, verify wiring against motorcycle's diagram, ensure adapter 2001-1266 is used for pre-'04 models.
Un lamp no funcionaDefectuós lamp, loose connection to one lamp.Check connection to the non-working lamp. If still not working, contact Custom Dynamics support.
Parpelleig lampsFont d'alimentació inestable, connexió fluixa.Assegureu-vos un vol establetage from the motorcycle's electrical system. Check all connections for tightness.

8. Especificacions

AtributDetall
MarcaDinàmica personalitzada
Número de modelPB-45-C
Lamp Mida4.5 polzades
Sortida de llum500 lúmens
ColorChrome
Color de la lentClar
Característica especialImpermeable
Pes de l'article2.85 lliures
UPC644978551043

9. Garantia i Suport

For warranty information and technical support, please contact Custom Dynamics directly. Refer to their official website or the product packaging for the most current contact details and warranty policy.

Weblloc: www.customdynamics.com

Documents relacionats - PB-45-C

Preview Capçal LED adaptatiu Custom Dynamics ProBEAM de 7"amp Instruccions d'instal·lació
Guia d'instal·lació pas a pas per al capçal LED adaptatiu Custom Dynamics ProBEAM de 7"amp (Números de peça PB-7A14-B, PB-7A14-C) per a motocicletes Harley-Davidson. Inclou informació de compatibilitat i diagrames de cablejat.
Preview ProBEAM® Sequential Saddlebag LED Lights Installation Instructions
Detailed installation guide for Custom Dynamics ProBEAM® Sequential Saddlebag LED Lights, covering package contents, vehicle fitment, safety precautions, and step-by-step assembly instructions for Harley-Davidson Touring models.
Preview Instruccions d'instal·lació dels intermitents LED Custom Dynamics Road Glide
Instruccions d'instal·lació dels intermitents LED Custom Dynamics Road Glide, incloent-hi els números de peça, el contingut del paquet, la compatibilitat del vehicle i una guia pas a pas amb avisos de seguretat.
Preview Custom Dynamics 2025 Product Catalog: Motorcycle LED Lighting & Accessories
Explore the Custom Dynamics 2025 Product Catalog featuring a comprehensive range of high-performance LED motorcycle lighting, accessories, and electrical components for Harley-Davidson and Indian Motorcycles. Enhance your ride's safety and style.